The largest database of trusted experimental protocols

Gene amp 9700 pcr machine

Manufactured by Thermo Fisher Scientific
Sourced in United States

The Gene Amp 9700 PCR machine is a thermal cycler used for polymerase chain reaction (PCR) amplification of DNA samples. It provides precise temperature control and cycling capabilities to facilitate the PCR process.

Automatically generated - may contain errors

7 protocols using gene amp 9700 pcr machine

1

Quantitative detection of gene mutations

Check if the same lab product or an alternative is used in the 5 most similar protocols
dPCR was performed on a QuantStudio™ 3D Digital PCR System platform consisting of a Gene Amp 9700 PCR machine (including a chip adapter kit), an automatic chip loader, and the QuantStudio™ 3D Instrument (Thermo Fisher Scientific). Consequently, the collected data were analyzed with QuantStudio 3D AnalysisSuite Cloud Software (Thermo Fisher Scientific). Mutation analysis of cfDNA by dPCR was based on a 5′‐exonuclease assay using TaqMan®‐MGB probes targeting KRAS G12V, G12D, G12R, and GNAS R201C (Thermo Fisher Scientific, Catalog number: A44177), which were chosen according to the genetic profiles observed in tissue samples.
+ Open protocol
+ Expand
2

Digital PCR Analysis of Tumor Mutations

Check if the same lab product or an alternative is used in the 5 most similar protocols
Digital polymerase chain reaction (PCR) was performed on a QuantStudio™ 3D Digital PCR System platform composed of a Gene Amp 9700 PCR machine (including a chip adapter kit), an automatic chip loader, and the QuantStudio™ 3D Instrument (Thermo Fisher Scientific). Consequently, the collected data were analyzed with QuantStudio 3D AnalysisSuite Cloud Software (Thermo Fisher Scientific). Mutation analysis in dPCR was based on a 5′‐exonuclease assay using TaqMan®‐MGB probes targeting KRAS G12V, G12D, G12A, G12S, G12C, G13D, Q61R, TP53 R248W, Y126*, Y107*, R158H, V272M, R175H, G244D, G245D, BRAF V600E, and CDKN2A H66R (Thermo Fisher Scientific, Catalog number: A44177). These targets were selected based on the mutations detected in tissues by NGS as indicated below, and one of the tissue‐derived mutations was selected for dPCR analysis of cfDNA.
+ Open protocol
+ Expand
3

Reverse Transcription of Total RNA

Check if the same lab product or an alternative is used in the 5 most similar protocols
2.5 μg of total RNA was reverse converted to cDNA in a volume of 20 μl using RevertAid M-MuLV reverse transcriptase (Fermentas, York, UK), according to manufacturer's protocols. The reactions were carried out in the GeneAMP 9700 PCR machine (Applied Biosystems/Life Technologies, Paisley, UK) at 42°C for 1 hour, followed by 5 minutes at 95°C.
+ Open protocol
+ Expand
4

DNA Sequencing Using ABI BigDye Terminator

Check if the same lab product or an alternative is used in the 5 most similar protocols
Restriction endonucleases and T4 DNA ligase were obtained from Thermo Fisher Scientific Inc. (Carlsbad, USA), and used with the buffer stocks recommended and provided by the company.
DNA sequencing was performed using the ABI BigDye Terminator Cycle Sequencing Kit v3.1 ThermoFisher Scientific Inc. (Carlsbad, USA) according to the manufacturer’s instructions on a Gene Amp 9700 PCR machine (Carlsbad, USA), and the sequences were detected on an ABI 3130XL Genetic Analyzer, Applied Biosystems (Carlsbad, USA).
+ Open protocol
+ Expand
5

Genetic Associations in Rheumatoid Arthritis

Check if the same lab product or an alternative is used in the 5 most similar protocols
DNA samples were derived from whole blood collected from study subjects at the time of VARA enrolment. Quantitative polymerase chain reaction was used to genotype patients’ DNA. SNP selection for FPGS and GGH utilised a tagSNP approach to detect associations with SNP blocks defined by linkage disequilibrium (LD), utilising the following parameters: 1) LD blocks were defined using a Caucasian LD map TagSNPs with an r2=0.8; 2) minor allele frequency (MAF) >0.1; 3) range of −1,500 basepairs (bps) from the initiation codon to +1,500 bps from the termination codon; and 4) 1 SNP/LD bin. MTHFR SNPs were chosen a priori based upon previously published reports (16 (link), 18 (link)).The patients were genotyped for the following SNPs: FPGS (rs7033913, rs10760503, rs10106); GGH (rs12548933, rs7010484, rs4617146, rs719235, rs11988534) and MTHFR (rs1801131, rs1801133). Genotyping was performed using either a BeadExpress platform (Illumina, San Diego, CA) (SNPs for FPGS, GGH, and MTHFR 1801133) or by TaqMan assay (MTHFR 1801131) using a Gene Amp 9700 PCR machine (Applied Biosystems, Foster City, CA) with endpoint analysis on a PRISM 7900HT Sequence Detection System (Applied Biosystems). Additionally, the participants were genotyped for the human leukocyte antigen shared epitope (HLA-DRB1-SE) containing alleles as previously described (24 (link)).
+ Open protocol
+ Expand
6

RT-qPCR Validation of RNA-seq Data

Check if the same lab product or an alternative is used in the 5 most similar protocols
Reverse transcription followed by quantitative real-time PCR (RT-qPCR) was performed as previously described [61 (link)] for validating the RNA-seq data. Reverse transcription and PCR of standard curve and individual samples was run with the Gene Amp 9700 PCR machine (Applied Biosystems, Foster City, USA). Real-time RT-qPCR was performed starting with a 5 min template incubation and denaturation step at 95°C, followed by 45 cycles divided in 10 s denaturation at 95°C, 10 s annealing at 60°C and 10 s synthesis at 72°C using the CFX384 Touch™ Real-Time PCR Detection System (Bio-Rad Laboratories, Inc., Hercules, USA) with the LightCycler® 480 SYBR Green I Master kit (Roche Applied Science, Penzberg, Germany). Samples were amplified in triplicates and the mean was used for further calculations. Normalised expression of target genes was determined using the geNorm algorithm [62 ] based on the geometric mean of 3 reference genes: eef1a1I1 (Eukaryotic translation elongation factor 1 alpha 1, like 1) [34 (link)], tuba1c (Tubulin, alpha 1c) [63 (link)] and actb1 (Actin, beta 1) (S2 File). We investigated gene transcription for fasn (Fatty acid synthase), mat1a (Methionine adenosyltransferase I, alpha), cbsb (Cystathionine-beta-synthase b) and vtg5 (Vitellogenin 5) that were selected among the differentially expressed genes in F1 livers from the RNA-seq analysis.
+ Open protocol
+ Expand
7

Hippocampal RNA Extraction for RT-PCR

Check if the same lab product or an alternative is used in the 5 most similar protocols
RT-PCR was performed as previously described (25, 36) . Frozen hippocampal tissue was homogenized in RLT Plus Buffer (Qiagen RNeasy Plus Mini Kit; Qiagen Pty, Chadstone Centre, Australia) using a Precellys 24 dual tissue homogenizer (Bertin Technologies, Provence, France). RNA was extracted using the Qiagen RNeasy Plus Mini Kit. Samples with poor RNA A260/280 ratios and integrity on an RNA gel were not used for further analysis.
Superscript III Reverse Transcription kit (Invitrogen, Carlsbad, CA) was used to synthesize cDNA on the GeneAmp 9700 PCR machine (Applied Biosystems, Life Technologies Pty, Mulgrave, Australia). RT-PCR was performed using a 7500 ABI real-time machine (Applied Biosystems), for primer pairs (δ, α5, and α6) and the housekeeping gene β-actin (25) . Each sample was run in duplicate along with an associated negative control sample. Products were detected using the SYBR Green (Applied Biosystems) DNA binding dye method. Results were analyzed by Sequence Detection Software v2.01 (Applied Biosystems) and the comparative Ct method (2 -ΔΔCt ) was used to calculate relative fold change. Controls included β-actin and a calibrator, which consisted of pooled brain samples and was used across all plates. Consistent Ct values were obtained for β-actin across the term/preterm and male/female samples.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!