The largest database of trusted experimental protocols

Vct 64 pet ct scanner

Manufactured by GE Healthcare
Sourced in United States

The VCT 64 PET/CT scanner is a diagnostic imaging system developed by GE Healthcare. It combines positron emission tomography (PET) and computed tomography (CT) technologies to provide high-resolution images for medical professionals. The core function of the VCT 64 PET/CT scanner is to capture detailed anatomical and functional information about the patient's body.

Automatically generated - may contain errors

2 protocols using vct 64 pet ct scanner

1

Whole-body FDG PET/CT Imaging Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Whole-body F-18 FDG PET/CT images were acquired using a Discovery ST 8, STE 16, RX16 or a VCT 64 PET/CT scanner (GE Healthcare, Piscataway, NJ). Patients fasted for over 6 hours, and the range of blood glucose levels was 68 to 166 mg/dl (average, 98.4 mg/dl), excluding one data point, which could not be obtained retrospectively. The average FDG dose administered was 12.3 mCi (ranging from 7.3 mCi to 19.8 mCi). Imaging from the skull vertex to the feet or proximal thighs began approximately 60–90 minutes after the intravenous administration of FDG. CT was acquired before PET with tube current modulation (mA/s) at 120 kV. The average amount of iodinated contrast (Omnipaque, GE Healthcare, Princeton, NJ) administered intravenously was 100 ml Omnipaque 350 with an automated injector (Medrad, Bayer HealthCare, Whippany, NJ) at a flow rate of 1–2.5 ml/s, based on the intravenous needle gauge and patient tolerance. All images were reconstructed with a 3.3 mm slice thickness. A breath-hold technique was not used.
+ Open protocol
+ Expand
2

Standardized PET/CT Imaging Protocol for 18F-FDG Uptake

Check if the same lab product or an alternative is used in the 5 most similar protocols
The scanning settings for the VCT 64 PET/CT scanner (GE Medical Systems, Waukesha, WI, USA) were 140 kV and 200 mA. Each patient was injected with 0.1 mCi/kg body weight of 18F‐FDG as a tracer. Three‐dimensional whole‐body PET acquisitions were performed at three time points with nominal start times at 40, 65, and 90 min after the injection. The filtered backprojection (FBP) method was applied for image reconstruction. The maximum standardized uptake value (SUVmax) was quantified on the PET/CT images by two experienced nuclear radiologists.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!