The largest database of trusted experimental protocols

6 protocols using isopropyl alcohol

1

Synthesis of Styrene-Itaconic Copolymer

Check if the same lab product or an alternative is used in the 5 most similar protocols
N-vinyl pyrrolidone (VP,99.5%, Shanghai Yuking Tech, Shanghai, China); styrene (St, 99%, Shanghai Macklin, Shanghai, China) after distillation under reduced pressure and purification; itaconic anhydride (ITA, 99.5%, Shanghai Macklin, Shanghai, China); 2,2′-azobis[2-methyl-n-(2-hydroxyethyl)propionamide) (VA-086), azodiisobutyronitrile (AIBN),β-mercaptoethanol (β-MCE), isopropyl alcohol (IPA), N,N′-Dicyclohexylcarbodiimide (DCC), 4-Dimethylaminopyridine (DMAP), acetone, dioxane, 1-dodecanethiol, carbon disulfide, 2-bromine propionic acid, sodium hydroxide, ethyl alcohol, AlN powder (original particle size: approximate 600 nm) were analytical reagents, from Shanghai Macklin Biochemical Co., Ltd. (Shanghai, China).
+ Open protocol
+ Expand
2

Synthesis and Characterization of PVP-Coated Nickel Catalyst

Check if the same lab product or an alternative is used in the 5 most similar protocols
Polyvineypirrolydone (PVP) and isopropyl alcohol were purchased from Shanghai Macklin Biochemical Co., Ltd. Potassium ferrocyanide trihydrate (K4[Fe(CN)6]·3H2O) and nickel acetate tetrahydrate (Ni(CH3COO)2·4H2O) were obtained from Sinopharm Reagent Co., Ltd. Hydrochloric acid (HCl solution, 36%) and anhydrous ethanol were purchased from Guangdong Guanghua Sci-Tech Co., Ltd. Nafion solution (D520, 5 wt.%) from DuPont™ and Vulcan XC-72R carbon black from Cabot were used as received for the study. All reagents were used without further purification. Water (DI water, 18.2 MΩ) used for all the experiments in this study was purified through an Aquaplore 2S system.
+ Open protocol
+ Expand
3

Fabrication of Stainless Steel Mask

Check if the same lab product or an alternative is used in the 5 most similar protocols
Permanent epoxy negative photoresist SU-8 2015 and developer were purchased from MircoChem, Newton, MA, USA. Polydimethylsiloxane (PDMS, sylgard 184) was purchased from Dow Corning, Midland, MI, USA and was used as-received. Hollowed-out 304L stainless mask was fabricated by Precise Corporation (Shenzhen, China). Isopropyl alcohol was purchased from Shanghai Macklin Biochemical Co, Ltd. Aniline blue, ammonium thiocyanate (NH4SCN, reagent grade 97.5%) and ferric chloride (FeCl3, reagent grade 97%) were obtained from Sigma Aldrich. De-ionized water was obtained from an Ultrapure Water Polishing System (CANSHI, Ningbo, China).
+ Open protocol
+ Expand
4

Immobilization of Purified Human Proteins

Check if the same lab product or an alternative is used in the 5 most similar protocols
Copric chloride dihydrate (ACS), l-/d-cysteine hydrochloride monohydrate (98%), and thioacetamide (98%) were purchased from Aladdin Biochemical Technology Co., Ltd. (Shanghai, China). Trifluoroacetic acid (≥99.9%, HPLC Grade, TFA), isopropyl alcohol (≥99.5%), and β-Mercaptoethanol (99%) were purchased from Macklin Biochemical Co., Ltd. (Shanghai, China). Immunoglobulin G, Albumin, and Transferrin purified from human serum were purchased from Sigma-Aldrich (Darmstadt, Germany). Ethanolamine (EA, ≥ 99.0% ACS), 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC, ≥ 98.0%), and N-hydroxysuccinimide (NHS, ≥ 98.0%) were purchased from Sigma-Aldrich.
+ Open protocol
+ Expand
5

Electrochemical CO2 Reduction Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
AgNO3 (99.8%) and NaOH (99%) were purchased from Aladdin Industrial Co. Ltd. Cs2CO3 (99.9%), isopropyl alcohol (≥99.5%) and ethanol (HPLC, ≥99.8%) were purchased from Macklin Biochemical Co. Ltd. Sodium citrate anhydrous (99%) was purchased from J&K Scientific Ltd. L (+) − Ascorbic acid (≥99.7%) was purchased from Tianjin Kemiou Chemical Reagent Co. Ltd. All chemical reagents were utilized without further purification. Commercially available carbon-based GDLs (AvCarb GDS3250) were purchased from Xima Laya Photo-Electric Technology Co. Ltd., China. PiperION-A5-HCO3 anion exchange resin, Fumion FAA anion exchange resin, PiperION-A15-HCO3 and FAA-3-50 were purchased from SCI Materials Hub. CO2, N2, Ar and H2 were all purchased from Air Liquide (≥99.999%). The ultrapure water (18.25 MΩ·cm) was supplied by a Millipore Direct-Q5 UV water purification system.
+ Open protocol
+ Expand
6

Synthesis of Redox-Active Materials

Check if the same lab product or an alternative is used in the 5 most similar protocols
Ferric nitrate nonahydrate (Fe(NO3)3·9H2O), glycerol, isopropyl alcohol, absolute ethanol, polyethylene glycol (PEG 20000), nitric acid (HNO3), sulfuric acid (H2SO4), potassium permanganate (KMnO4), hydrogen peroxide (H2O2), sulphur powder and graphite powder were bought from Macklin. Lithium iodide (LiI), lithium perchlorate (LiClO4) and tetrabutyl ammonium iodide, 4-tert-butyl pyridine, acetonitrile, were obtained from Aladdin. All the chemical-grade agents were commercially purchased without further purification.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!