Log In Sign up
The largest database of trusted experimental protocols

Magnesium chloride anhydrous

Manufactured by Merck Group
Visit Supplier
Sourced in Germany, Italy

Magnesium chloride anhydrous is a chemical compound with the formula MgCl2. It is a white, crystalline solid that is highly soluble in water and other polar solvents. The primary function of magnesium chloride anhydrous is to serve as a laboratory reagent and a source of magnesium ions in various chemical reactions and analyses.

Automatically generated - may contain errors

Lab products found in correlation

Ammonium molybdate tetrahydrate, by Merck Group (2 mentions) Triton x 100, by Merck Group (2 mentions) Phosphatase inhibitor cocktail 2, by Merck Group (2 mentions) Resazurin sodium salt, by Merck Group (2 mentions) Phosphate buffered saline (pbs), by Merck Group (2 mentions) Anhydrous zinc chloride, by Merck Group (2 mentions) Anhydrous sodium carbonate, by Merck Group (2 mentions) Alkaline phosphatase from bovine intestinal mucosa, by Merck Group (1 mentions) Malachite green oxalate salt, by Merck Group (1 mentions) Rhodamine 123, by Merck Group (1 mentions) D glucose, by Merck Group (1 mentions) Potassium phosphate monobasic kh2po4, by Merck Group (1 mentions) 4 2 hydroxyethyl 1 piperazineethanesulfonic acid hepes, by Carl Roth (1 mentions) Fetal bovine serum (fbs), by Merck Group (1 mentions) Manganese chloride, by Merck Group (1 mentions) Disodium succinate, by Merck Group (1 mentions) Lead chloride, by Merck Group (1 mentions) Fumaric acid, by Merck Group (1 mentions) Dodecanoic acid, by Merck Group (1 mentions) Disodium tartrate, by Merck Group (1 mentions)

8 protocols using magnesium chloride anhydrous

1

Chitosan-Polyphosphate Biomaterials Synthesis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Chitosan (Cs) 25 kDa was purchased from Heppe Medical Chitosan GmbH (Halle, Germany) and sodium polyphosphate (PP) from Merck KGaA (Vienna, Austria). Alkaline phosphatase from bovine intestinal mucosa (7165 units/mg protein), ammonium molybdate tetrahydrate (8–83%), glucose-D-(+) ≥ 99.5% anhydrous, magnesium chloride anhydrous (MgCl2) ≥ 98%, minimum essential medium (MEM) eagle, malachite green oxalate salt 90%, potassium phosphate monobasic (KH2PO4) ≥ 99.5%, phosphatase inhibitor cocktail 2, resazurin sodium salt, rhodamine 123, Triton X-100, and anhydrous zinc chloride (ZnCl2) ≥ 97% were purchased from Sigma-Aldrich (Vienna, Austria). 4-(2-Hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES) ≥ 99.5% was purchased from ROTH GmbH (Karlsruhe, Germany). Fetal bovine serum (FBS) and phosphate-buffered saline (PBS) were purchased from Biochrom, Merck (Tutzing, Germany). D-(+)-Trehalose dehydrate ≥98.0% was purchased from TCI Chemicals (Eschborn, Germany).
Saleh A., Akkuş-Dağdeviren Z.B., Friedl J.D., Knoll P, & Bernkop-Schnürch A. (2022). Chitosan – Polyphosphate nanoparticles for a targeted drug release at the absorption membrane. Heliyon, 8(9), e10577.
+ Open protocol
+ Expand
2

Synthesis of Luminescent Coordination Polymers

Check if the same lab product or an alternative is used in the 5 most similar protocols
Silver
nitrate (AgNO3), calcium chloride dihydrate (CaCl2·2H2O), sodium nitrate (NaNO3), potassium
chloride
(KCl), manganese chloride (MnCl2), copper II chloride dihydrate
(CuCl2·2H2O), magnesium chloride anhydrous
(MgCl2), aluminum chloride (AlCl3), iron III
chloride (FeCl3), dysprosium III chloride hexahydrate (DyCl3·6H2O), sodium citrate tribasic tetrahydrate
(HOC(COONa) (CH2COONa)2·4H2O),
hydrogen peroxide (H2O2), terbium III chloride
hexahydrate (TbCl3·6H2O), ytterbium III
chloride hexahydrate (YbCl3·6H2O), holmium
III chloride hexahydrate (HoCl3 ·6H2O),
lead chloride (PbCl2), sodium carbonate anhydrous (Na2CO3), sodium phosphate (Na3PO4), sodium sulfate (Na2SO4), sodium fluoride
(NaF), sodium acetate (CH3COONa), disodium tartrate, disodium
succinate, disodium malate, CTAB, polyethylene glycol 1500, and dodecanoic
acid were purchased from Sigma-Aldrich Company (South Korea). Fumaric
acid, p-toluene sulfonic acid (PTSA), and 3-(4-hydroxyphenyl)propanoic
acid were purchased from Merck (Germany). All solvents and chemicals
were used as received without purification. DI water filtered to 18
MΩ·cm was used in all experiments.
Shaban S.M., Lee J.Y, & Kim D.H. (2020). Dual-Surfactant-Capped Ag Nanoparticles as a Highly Selective and Sensitive Colorimetric Sensor for Citrate Detection. ACS Omega, 5(19), 10696-10703.
+ Open protocol
+ Expand
3

Trace Metal Preparation Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Ascorbic acid (C6H8O6), ethylene glycol (C2H6O2), magnesium chloride anhydrous (MgCl2), manganese(II) chloride tetrahydrate (MnCl2·4H2O), iron(II) chloride anhydrous (FeCl2), cobalt(II) chloride hexahydrate (CoCl2·6H2O), nickel(II) chloride hexahydrate (NiCl2·6H2O), ammonium oxalate monohydrate [(NH4)2C2O4·H2O], and manganese dioxide (MnO2) were all obtained from Sigma-Aldrich. Deionized ultrapure water with a resistivity of 18.2 megohm⋅cm was used for all experiments.
Pu Y., Moseley D., He Z., Pitike K.C., Manley M.E., Yan J., Cooper V.R., Mitchell V., Peterson V.K., Johannessen B., Hermann R.P, & Cao P. (2023). (Mg,Mn,Fe,Co,Ni)O: A rocksalt high-entropy oxide containing divalent Mn and Fe. Science Advances, 9(38), eadi8809.
+ Open protocol
+ Expand
4

Electrochemical Detection of Furanone Compounds

Cited 1 time
Check if the same lab product or an alternative is used in the 5 most similar protocols
4-Hydroxy-2,5-dimethyl-3(2H)-furanone, 4,5-dimethyl-3-hydroxy-2,5-dihydrofuran-furanone (sotolon), 5-ethyl-4-hydroxy-2-methyl-3(2h)furanone (homofuraneol), 5-ethyl-3-hydroxy-4-methyl-2(5h)-furanone (maple furanone), magnesium chloride anhydrous, hydrochloride acid, Tris, sodium chloride, cysteamine, N(3-dimethylaminopropyl)N ethylcarbodiimide (EDC), N-Hydroxysulfosuccinimide sodium salt (NHS), 1,8-Octanedithiol, N-Hydroxy succinimide (NHS), ethanol, 11-mercaptoundecanoic acid (11-MUA), phosphate buffer saline (PBS), potassium chloride (KCl), potassium ferricyanide III (K3[(Fe(CN)6]), potassium ferricyanide II trihydrate (K4[(Fe(CN)6]x3H2O), Celite 545, MWCNT carboxyl, sodium dodecyl sulphate (SDS) were obtained from Sigma Aldrich (Munich, Germany). Furaneol aptamer (5′-amine group -CGCCAGCTCATTCCTCACCACGAGAAAGGAGCTCGATGAACTGCGAGCCGGATTCGACCCTATGCGAGTAGGTGGT- methylene blue-3′) amine group at the 5′-end was ordered from Microsynth AG (Balgach, Switzerland) [19 (link)]. Polyethylene Terephthalate (PET) flexible substrate with a 125-micron thickness was purchased from Mylar (Chester, VA, USA). Ink pastes, silver chloride ECI 6038E and silver ECI 1011, were purchased from LOCTITE E&C (CA, USA). All chemicals used in this work are analytical grade and were used without any further purifications.
Douaki A., Demelash Abera B., Cantarella G., Shkodra B., Mushtaq A., Ibba P., Inam A.S., Petti L, & Lugli P. (2020). Flexible Screen Printed Aptasensor for Rapid Detection of Furaneol: A Comparison of CNTs and AgNPs Effect on Aptasensor Performance. Nanomaterials, 10(6), 1167.
+ Open protocol
+ Expand
5

Phosphatase Assay Protocol for Cell Cultures

Check if the same lab product or an alternative is used in the 5 most similar protocols
Sodium polyphosphate [PolyP, Graham's salt], PEI [molecular mass (mm) 25 kDa, branched], alkaline phosphatase from bovine intestinal mucosa (7165 units/mg protein), magnesium chloride anhydrous (MgCl2, 98%), zinc chloride anhydrous (ZnCl2, 97%), potassium phosphate monobasic (KH2PO4, 99.5%), phosphatase inhibitor cocktail 2, Triton X-100, ammonium molybdate tetrahydrate (81-83%), malachite green (MLG) oxalate salt (90%), fluorescein diacetate (FDA), minimum essential medium (MEM) eagle, glucose-d-(+) ≥99.5% (anhydrous), and resazurin sodium salt were purchased from Sigma-Aldrich (Vienna, Austria).
Fetal bovine serum (FBS), penicillin-streptomycin liquid and phosphate-buffered saline (PBS) were purchased from Biochrom, Merck (Tutzing, Germany). d-(+)-Trehalose dihydrate >98.0% (GC) was purchased from TCI Chemicals (Eschborn, Germany). 4-(2-Hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES) ≥99.5% was obtained from ROTH GmbH (Karlsruhe, Germany).
Akkus Z.B., Nazir I., Jalil A., Tribus M, & Bernkop-Schnürch A. (2019). Zeta Potential Changing Polyphosphate Nanoparticles: A Promising Approach To Overcome the Mucus and Epithelial Barrier. Molecular pharmaceutics, 16(6).
+ Open protocol
+ Expand
6

Polyelectrolyte-Based Ion-Exchange Membrane Preparation

Check if the same lab product or an alternative is used in the 5 most similar protocols
Poly(allylamine
hydrochloride) (PAH, Mw = 17 500
Da), poly(sodium 4-styrenesulfonate)
(PSS, Mw = 70 000 Da), sodium chloride
(NaCl, ≥99%), anhydrous magnesium chloride (MgCl2, ≥98%), and sodium 2-mercaptoethanesulfonate (MESNA, analytical
standard, ≥ 98.0) were purchased from Sigma-Aldrich. Hydrochloric
acid (36.5–28.0% NF grade) was purchased from VWR International.
Nitric acid (65%, for analysis) and ethanol (absolute) were purchased
from Merck Millipore. Acetone (HPLC grade, 99.9%) and dichloromethane
(stabilized with amylene) were purchased from BIOSELVE BV. All chemicals
were used as received without further purification. The inorganic
salts were kept in a vacuum oven overnight prior to use.
Neosepta
cation-exchange (CMX), anion-exchange (AMX), and monovalent cation-selective
(CIMS) membranes (Astom Corp., Japan) were soaked in a solution of
4 mM NaCl and 4 mM MgCl2 for at least 48 h before use.
The porous carbon electrodes, which were deposited on a graphite foil
substrate, were supplied by Voltea BV, Netherlands. Glass fiber prefilters
(25 mm in diameter) with a pore size of 2.0 μm (Merck Millipore)
were used as a spacer for MCDI experiments. Flat substrates of gold
sputtered on glass (1 × 1 cm) were purchased from ECsens. Milli-Q
water (18.2 MΩ·cm, Milli-Q Integral 3 system, Millipore)
was used to prepare salt and polyelectrolyte solutions.
Sahin S., Dykstra J.E., Zuilhof H., Zornitta R.L, & de Smet L.C. (2020). Modification of Cation-Exchange Membranes with Polyelectrolyte Multilayers to Tune Ion Selectivity in Capacitive Deionization. ACS Applied Materials & Interfaces, 12(31), 34746-34754.
+ Open protocol
+ Expand
7

Antioxidant Capacity Evaluation

Check if the same lab product or an alternative is used in the 5 most similar protocols
Folin and Ciocalteu’s phenol reagent, sodium carbonate (≥99.5%), 2,2′-diphenyl-1-picrylhydrazyl (95%) (DPPH), 6-hydroxy-2,5,7,8-tetramethylchroman-2-carboxylic acid (97%; Trolox), citric acid (≥99.5%), and anhydrous magnesium chloride (≥98%) were purchased from Sigma-Aldrich (Milan, Italy). Gallic acid and ethanol (≥99.9%) were supplied by Fluka (Milan, Italy). Ultrapure water was prepared using a Milli-Q filter system (Millipore, Milan, Italy).
Zeppa G., Tedesco M., Bertolino M, & Çilek Tatar B. (2021). Grape Pomace as a New Coagulant for Tofu Production: Physicochemical and Sensory Effects. Foods, 10(8), 1857.
+ Open protocol
+ Expand
8

Analytical-Grade Chemical Preparation

Check if the same lab product or an alternative is used in the 5 most similar protocols
The chemicals, such as analytical grade anhydrous calcium chloride (CaCl2), anhydrous magnesium chloride (MgCl2), anhydrous sodium carbonate (Na2CO3), dipotassium phosphate (K2HPO4), and potassium dihydrogen phosphate (KH2PO4), were purchased from Sigma-Aldrich without further purification.
Liu J.H., Huang C., Wu H., Long Y., Tang X., Li H., Shen J., Zhou B., Zhang Y., Xu Z., Fan J., Zeng X.C., Lu J, & Li Y.Y. (2024). From salt water to bioceramics: Mimic nature through pressure-controlled hydration and crystallization. Science Advances, 10(9), eadk5047.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!