N,Nʼ-methylenebis(acrylamide) (MBAA, 99%; Sigma-Aldrich), poly(ethyleneglycol)diacrylate (PEGDA, Mn = 250, 575, 700; Sigma-Aldrich); ethyleneglycoldimethacrylate (≥97%; TCI), N,N,Nʼ,Nʼ-tetramethylethylendiamine (TMEDA, ≥99.5%; Sigma-Aldrich), ammoniumpersulfate (APS, 98%; Roth), 3-sulfopropylmethacrylate potassium (98%; Sigma-Aldrich), 3-sulfopropylacrylate potassium (Sigma-Aldrich), 2-acrylamido-2-methyl-1-propanesulfonicacid (99%; Sigma-Aldrich), (vinylbenzyl)trimethylammonium chloride (99%; ACROS Organics), [2-(acryloyloxy)ethyl]trimethylammonium chloride (80 wt.% in H2O; Aldrich), [2-(methacryloyloxy)ethyl]trimethylammonium chloride (75 wt.% in H2O; Aldrich), 2-hydroxyethylmethacrylate (97%; Alfa Aesar), [2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammoniumhydroxide (95%; Sigma-Aldrich), 2-methacryloyloxyethylphosphorylcholine (97%; Sigma-Aldrich), 1-vinylimidazole (≥99%; Alfa Aesar), bromoethane(≥99%; Sigma-Aldrich), amino-2-propanol(93%; TCI), methacrylicanhydride (94%; Alfa Aesar) were all used as received without further treatment. 1-Vinyl-3-ethyl-imidazoliumbromide (VEtImBr) and 2-Hydroxypropyl methacrylamide (HPMAA) were prepared according to published procedures.[21 (link),22 (link)]
3 sulfopropylmethacrylate potassium
Manufactured by Merck Group
Sourced in Denmark
3-sulfopropylmethacrylate potassium is a chemical compound used in laboratory settings. It functions as a water-soluble monomer that can be polymerized. The compound contains a sulfopropyl group and a methacrylate group.
Automatically generated - may contain errors
Lab products found in correlation
2 methacryloyloxyethyl phosphorylcholine, by Merck Group (1 mentions)
Ethylene glycol dimethacrylate, by Merck Group (1 mentions)
Bromoethane, by Merck Group (1 mentions)
Methacrylic anhydride, by Thermo Fisher Scientific (1 mentions)
2 hydroxyethyl methacrylate, by Thermo Fisher Scientific (1 mentions)
1 vinylimidazole, by Thermo Fisher Scientific (1 mentions)
Poly ethylene glycol diacrylate pegda, by Merck Group (1 mentions)
2 acrylamido 2 methyl 1 propanesulfonic acid, by Merck Group (1 mentions)
2 methacryloyloxy ethyl trimethylammonium chloride, by Merck Group (1 mentions)
Ammonium persulfate, by Carl Roth (1 mentions)
2 methacryloyloxy ethyl dimethyl 3 sulfopropyl ammoniumhydroxide, by Merck Group (1 mentions)
Potassium chloride (kcl), by Merck Group (1 mentions)
Lithium chloride (licl), by Merck Group (1 mentions)
Diethyl ether, by Avantor (1 mentions)
Toluene, by Avantor (1 mentions)
N n dimethylformamide (dmf), by Avantor (1 mentions)
Acetonitrile, by Avantor (1 mentions)
4 4 azobis 4 cyanovaleric acid, by Merck Group (1 mentions)
Potassium bromide, by Merck Group (1 mentions)
Arium pro, by Sartorius (1 mentions)
2 protocols using 3 sulfopropylmethacrylate potassium
1
Hydrogel Polymer Synthesis Protocols
2
Synthesis of Functionalized Polymers
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Chemicals [2-(methacryloyloxy)ethyl]trimethylammonium chloride (METAC, 75 wt.% in H2O), 3sulfopropyl methacrylate potassium (SPMAK, 98%), 2-(dimethylamino)ethyl methacrylate (98%), 1,4-butane sultone (BS, ≥99%), 4-cyano-4-[(dodecylsulfanylthiocarbonyl)sulfanyl] pentanoic acid (CDPA, 97%), allyl methacrylate (AMA, 98%), n-butyl methacrylate (n-BMA, 99%), 3-mercaptopropyl trimethoxysilane (MPTMS, 95%), 2,2,2-trifluoroethanol (TFE, ≥99%), pentaerythritol tetrakis(3-mercaptopropionate) (PETMP, ≥95%), 4,4′-azobis(4-cyanovaleric acid) (ACVA, ≥98%), potassium chloride (KCl, 99.5%), potassium thiocyanate (KSCN, 99%), potassium bromide (KBr, 99%), lithium chloride (LiCl, 99%), and cesium chloride (CsCl, 98%) were purchased from Sigma-Aldrich Denmark. N,N-Dimethylformamide (≥99.9%), diethyl ether (≥99.9), toluene (≥99.8), and acetonitrile (≥99.9) were received from VWR Chemicals BDH and passed through activated basic aluminum oxide (Brockman I, Sigma-Aldrich) before use to remove any inhibitors. Zwitterionic monomer N-(2-methacryloylxyethyl)-N,N-diemthylammonium butanesulfonate (MABS) was prepared beforehand using the procedure reported in a previous study. 32 (link) Ultrapure water (Sartorius Arium Pro; 18.2 MΩ⋅cm) was used for preparing aqueous salt solutions.
About PubCompare
Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.
We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.
However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.
Ready to get started?
Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required
Revolutionizing how scientists
search and build protocols!