BC hydrogels were purchased from Hainan Yide Co. Ltd., China. Vinyltrimethoxysilane (VTMS) (98%) was bought from Shanghai Macklin Biochemical Co. Ltd., China. Di-tert-butyl peroxide (DTBP, 98%), pyrrole (99%), tert-butanol (TBA, 99%), acetic acid (~ 95%), and ammonium persulphate (APS, 98%) were bought from Shanghai energy chemical Co. Ltd., China. Hydrochloric acid (HCl) (36.0 ~ 38.0%) and hexadecylcetyltrimethylammonium bromide (CTAB, 99%) were bought from Sigma-Aldrich Co. Ltd., China. Sodium hydroxide (NaOH), sodium chloride (NaCl), calcium chloride (CaCl2), magnesium chloride (MgCl2), magnesium sulphate (MgSO4), potassium chloride (KCl), sodium bromide (NaBr), and sodium bicarbonate (NaHCO3) were bought from Sinopharm chemical reagent Co. Ltd., China. The aggregation induced emission (AIE) molecules were obtained from AIEgen Biotech Co. Ltd., China. All chemicals were of analytical grade and directly used without further purification.
Sodium bicarbonate nahco3
Manufactured by Sinopharm
Sourced in China
Sodium bicarbonate (NaHCO3) is a chemical compound that is commonly used as a laboratory reagent. It is a white, crystalline solid that is soluble in water. The primary function of sodium bicarbonate is to act as a buffering agent, maintaining a stable pH in various laboratory applications.
Automatically generated - may contain errors
Lab products found in correlation
Hydrochloric acid (hcl), by Merck Group (1 mentions)
Pyrrole, by Energy Chemical (1 mentions)
Acetic acid, by Energy Chemical (1 mentions)
Methanol, by Sinopharm (1 mentions)
Chloroform chcl3, by Sinopharm (1 mentions)
Sodium dodecyl sulfonate, by Merck Group (1 mentions)
Mtt reagent, by Merck Group (1 mentions)
4 protocols using sodium bicarbonate nahco3
1
Synthesis and Characterization of AIE Hydrogels
2
Metoprolol Removal from Wastewater
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
High ultrapure water, obtained from a Milli-Q water purification system, was used for preparing all the solutions. Metoprolol tartrate salt (98%), commercial nZVI (50 nm) and ferrous sulfate heptahydrate (>99%) were acquired from Aladdin (Shanghai, China). Sodium persulfate (PS), tert-butanol (TBA), ethanol (EtOH), sodium hydroxide (NaOH), sulfuric acid (H2SO4), sodium chloride (NaCl), sodium sulfate anhydrous (Na2SO4), sodium nitrate (NaNO3) and sodium bicarbonate (NaHCO3) were purchased from Shanghai Sinopharm Chemical Reagent Co., Ltd (China). The effluent of the secondary treatment was collected from one wastewater treatment plant (WWTP) in Shanghai, China. The major qualities of WWTP effluent were summarized in Table S1.† The WWTP effluent were filtered through a 0.45 μm membrane filter with 48 h after sampling and stored at 4 °C until use.
3
Synthesis and Purification of Luminescent Materials
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
MI (>98.0%), SI (>98.0%), and Lawesson’s reagent (>97.0%) were purchased from Tokyo Chemical Industry (TCI) Co., Ltd. DBMI (>98.0%), sodiumiodide (NaI, 99.0%), and maleic anhydride (MA, >99.0%) were purchased from Shanghai Aladdin Co., Ltd. 1,3-diaminopropane (DAP, 98%) was obtained from Beijing Innochem Co., Ltd. Dichloromethane (DCM, CH2Cl2), n-hexane, N,N-dimethylformamide (DMF), sodium carbonate (Na2CO3, >99.0%), and toluene were purchased from Shanghai Titan Co., Ltd. Bromine (Br2), acetic acid (AcOH), acetic anhydride (Ac2O), methanol, chloroform (CHCl3), sodium bicarbonate (NaHCO3), ethanol, and PMMA (Mw = 35,000) were obtained from Sinopharm Group Co., Ltd. THF (99.9% for spectroscopy) was purchased from J&K Scientific Co., Ltd. Considering the photoluminescent measurements, SI and DBMI were recrystallized twice before use to ensure their purity. PMMA (10 g) was purified by dissolution in DCM (20 mL) and consequent precipitation in ethanol (200 mL) three times before use.
4
Rhein-based Cytotoxicity Assay Protocol
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Rhein was obtained by Xi’an Natural Field Bio-Technique Co., Ltd. Sodium bicarbonate NaHCO3 was provided from Sinopharm Chemical Reagent Co., Ltd. Phosphate buffer solutions (PBS) were purchased from Xiya Reagent (Chengdu, China). MTT reagent, dimethylsulfoxide (DMSO), destination access point identifier (DAPI), polyacrylamide and sodium dodecyl sulfonate were purchased from Sigma. Ultrapure water (>18 MΩ) was used. All the reagents were used without further purification throughout this study.
About PubCompare
Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.
We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.
However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.
Ready to get started?
Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required
Revolutionizing how scientists
search and build protocols!