The largest database of trusted experimental protocols

Avance ultrashield nmr spectrometer

Manufactured by Bruker

The Avance Ultrashield NMR spectrometer is a nuclear magnetic resonance spectrometer designed and manufactured by Bruker. It is capable of performing high-resolution NMR spectroscopy analysis on a variety of samples.

Automatically generated - may contain errors

3 protocols using avance ultrashield nmr spectrometer

1

Synthesis and Characterization of HL-CH3(R)

Check if the same lab product or an alternative is used in the 5 most similar protocols
All chemicals were purchased from commercial sources and used as received, unless stated otherwise. 1H and 13C NMR spectra were recorded using either a 400 or 500 MHz Bruker Avance Ultrashield NMR spectrometer at 296 K. Spectra were referenced internally by using the residual solvent (1H δ = 3.34 and 13C δ = 49.86 for CD3OD-d4 relative to SiMe4). ESI-MS spectra were recorded by Dr L. Haigh (Imperial College London) on a Bruker Daltronics Esquire 3000 spectrometer. HL-CH3(R) was synthesised and characterised according to published procedures.26 (link)
+ Open protocol
+ Expand
2

Characterization of Fluorescent Dyes and Oligonucleotides

Check if the same lab product or an alternative is used in the 5 most similar protocols
All chemicals were used as purchased from commercial sources unless stated otherwise. Solvents were distilled over an appropriate drying agent and degassed prior to use. 1H and 13C NMR spectra were recorded by using a 400 or 500 mhz Bruker Avance Ultrashield NMR spectrometer at 296 K, respectively. Chemical shifts are referenced to residual deuterated solvent. Mass spectra were obtained by using electrospray ionisation (ESI) by Mrs. L. Haigh (Imperial College London) on a Bruker Daltronics Esquire 3000 spectrometer. Compound microanalysis was performed by Mr. A. Dickerson (Cambridge University). Absorption measurements were made on a Perkin–Elmer UV/Vis spectrometer. Emission spectra were obtained on a Varian Cary‐Eclipse fluorescence spectrometer. The oligonucleotides used were purchased RP‐cartridge purified from Eurogentec. CT‐DNA was obtained from Sigma–Aldrich. TOTA, TMPA‐M, ADOTA‐M,DAOTA‐M2,11 and 1,13‐dimethoxy‐5,9‐bis (propyl)‐5H‐quinolino[2,3,4‐kl]acridin‐9‐ium tetraflouroborate13 were prepared by previously reported procedures.
+ Open protocol
+ Expand
3

Quantitative Analysis of Mannan Binding

Check if the same lab product or an alternative is used in the 5 most similar protocols
Supernatants were harvested from the alum/mannans mixture and were lyophilized. Lyophilized supernatants and a standard mannan sample (4.0 mg) that was not mixed with AH were respectively dissolved in 500 μl of deuterium oxide (99.9% D) with 0.01% (W/V) internal standard TMSP-2,2,3,3-D4 (98.0% D). 1H-NMR data were collected on a 400MHz Bruker Avance Ultra Shield NMR spectrometer at 295 K with the same acquisition parameters for all the samples. NMR spectra were processed using TOPSPIN 2.1 running on the Avance 400MHz NMR. The ring proton resonances (3.25 - 4.50 ppm) were integrated referencing to the integral of internal standard (−0.02 - 0.02 ppm) calibrated as 1.0. Based on the ratio between the mass of standard mannan (4.0 mg) and its ring proton integral (39.12), the mass of mannan in the supernatant was calculated using the detected ring proton integral multiplied by 4.0/39.2. Thus, the amount of mannan absorbed by the AH was determined by difference between the mass of total mannan added and the mass of mannan remaining in the supernatant after formulation.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!