The largest database of trusted experimental protocols

Ethylene glycol monomethyl ether

Manufactured by Sinopharm

Ethylene glycol monomethyl ether is a colorless liquid chemical compound used as a solvent in various industrial and laboratory applications. It has a mild odor and is miscible with water and other organic solvents. The chemical formula is CH3OCH2CH2OH.

Automatically generated - may contain errors

2 protocols using ethylene glycol monomethyl ether

1

Photolithographic Etching of Silver Nanowire Composites

Check if the same lab product or an alternative is used in the 5 most similar protocols

Example 4

All chemicals including oxidizing agent KMnO4, FeCl3, acetic acid, sodium acetate, lactic acid, malic acid(hydrozybutanedioic acid), citric acid (2-hydroxypropane-1,2,3-tricarboxylic acid), succinimide were purchased from Aladdin Industrial Corporation, China. Solvents, ethylene glycol, polyethylene glycol, ethylene glycol monomethyl ether, and propylene glycol dimethyl ether, were purchased from Sinopharm Chemical Reagent Co. Ltd. Following table summarizes exemplary compositions used for photolithography etching of the silver nanowire nanocomposite layer 102.

Etching
OxidizerLigandSolventtime
Example(wt %)(wt %)(wt %)(min)
4-1KMnO4Acetic acidWater1
(0.1)(1.24)(98.7)
4-2KMnO4Acetic acidWater2
(0.005)(0.011)(98.9)
4-3KMnO4Acetic acidWater5
(0.1)(1.76)(96.38)
Sodium acetate
(1.76)
4-4KMnO4SuccinimdeWater5
(0.1)(1.18)(98.72)
4-5KMnO4SuccinimideWater5
(0.97)(1.11)(96.28)
Acetic acid
(1.65)
4-6FeCl3Lactic acidWater0.5
(1.16)(1.00)(97.84)
4-7FeCl3SuccinimideWater2
(1.00)(0.98)(98.02)
4-8FeCl3SuccinimideWater0.5
(1.10)(1.00)(96.72)
acetic acid
(1.18)
4-9FeCl3Acetic acidWater0.5
(0.93)(1.00)(97.07)
Sodium acetate
(1.00)

+ Open protocol
+ Expand
2

Fabrication of Porous Alumina Supported ZIF-8 Membrane

Check if the same lab product or an alternative is used in the 5 most similar protocols
The commercial porous α-alumina tubes with 4 mm OD (outer diameter), 3 mm ID (inner diameter) and an average pore size of 100 nm as substrates were purchased from Hyflux Ltd. Co. The tubes were cut into 60 mm lengths and washed sequentially with distilled water and ethanol several times. The tubes were then dried at 100 °C for 5 h before calcination at 550 °C for 6 h.
The chemicals used in the membrane preparation include zinc nitrate hexahydrate (≥99.0%), zinc acetate (98.0%), ethylene glycol monomethyl ether (C3H8O2, EGME, 99.0%), toluene (≥99 wt%), ammonium hydroxide (NH3, 28–30% aqueous solution), N,N-dimethylformamide (DMF, ≥99 wt%), monoethanolamine (C2H7NO, MEA, 99.0%) and anhydrous methanol (≥99.5%) purchased from Sinopharm Chemical Reagent Co., Ltd. Benzimidazole (bIm, ≥99 wt%), phthalic acid (BDC, ≥99 wt%) and 1,3,5-benzenetricarboxylic acid (BTC, ≥99 wt%) were supplied by Sigma-Aldrich Chemical. Co. Ltd. Zinc oxide nanoparticles (cal. 40 ± 10 nm) were purchased from Beijing Nachen S&T Ltd.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!