The diatoms Phaeodactylum tricornutum were obtained from an algal culture facility at NJIT, USA. Zirconyl oxychloride-octahydrate, sodium dihydrogen phosphate, disodium hydrogen phosphate, potassium hexacyanoferrate (III) trihydrate, potassium hexacyanoferrate (II) and sulphuric acid were purchased from Sigma-Aldrich and were of analytical grade. The MP standard was procured from Sigma-Aldrich. All these solutions were made in milli-q water.
Potassium hexacyanoferrate 3 trihydrate
Manufactured by Merck Group
Sourced in Germany
Potassium hexacyanoferrate (III) trihydrate is a chemical compound with the formula K3[Fe(CN)6] · 3H2O. It is a crystalline solid that is commonly used as a laboratory reagent and in various industrial applications.
Automatically generated - may contain errors
Lab products found in correlation
Sulphuric acid, by Merck Group (2 mentions)
Potassium hexacyanoferrate 2, by Merck Group (2 mentions)
Mp standard, by Merck Group (2 mentions)
Sodium dihydrogen phosphate, by Merck Group (1 mentions)
Disodium hydrogen phosphate, by Merck Group (1 mentions)
Iron 3 chloride hexahydrate, by Merck Group (1 mentions)
Polyvinylpyrrolidone pvp, by Merck Group (1 mentions)
Iron 2 chloride tetrahydrate, by Merck Group (1 mentions)
Hydrochloric acid (hcl), by Merck Group (1 mentions)
Ammonium hydroxide nh4oh, by Merck Group (1 mentions)
Pdda solution, by Merck Group (1 mentions)
Glutaraldehyde, by Merck Group (1 mentions)
Ethanolamine, by Merck Group (1 mentions)
Glycine, by Merck Group (1 mentions)
Potassium hexacyanoferrate 2 trihydrate, by Merck Group (1 mentions)
Nitric acid, by Merck Group (1 mentions)
Sodium hydroxide (naoh), by Merck Group (1 mentions)
Hydrogen peroxide, by Merck Group (1 mentions)
Potassium hydroxide, by Merck Group (1 mentions)
Phosphoric acid, by Merck Group (1 mentions)
4 protocols using potassium hexacyanoferrate 3 trihydrate
1
Phaeodactylum tricornutum Characterization Protocol
2
Cesium Adsorption on Iron-based Nanocomposites
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Materials: Iron (II) chloride tetrahydrate (FeCl2·4H2O), Iron (III) chloride hexahydrate (FeCl3·6H2O), potassium hexacyanoferrate (III) trihydrate (K3[Fe(CN)6]·3H2O), PDDA solution (20 wt %, MW 400,000~500,000), hydrochloric acid (HCl) and ammonium hydroxide (NH4OH), polyvinylpyrrolidone (PVP, MW = 40,000) were purchased from Sigma-Aldrich, Korea. A standard cesium solution (1000 ppm) was purchased from Kanto Chemical Co. Inc. (Tokyo, Japan). All chemicals used in this study were of analytical reagent grade. Deionized (DI) water was used in this study. Additionally, 137Cs solution was provided from the Korea Atomic Energy Research Institute (KAERI), Daejeon, Korea.
3
Platelet Factor 4 Binding Assay
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
The following reagents were
used: cysteamine-hydrochloride (Fluka, Sigma-Aldrich, 30080, Germany),
ethanolamine (Sigma-Aldrich, E9508, Germany), glycine (Sigma-Aldrich,
092K0099, Germany), glutaraldehyde (Sigma-Aldrich grade I 25%), potassium-hexacyanoferrate
(II) trihydrate (Merck, A870884, Darmstadt, Germany), potassium-hexacyanoferrate(III)
trihydrate (Merck, A81167372124, Darmstadt, Germany), RTO and KKO
(Invitrogen, Thermo Fisher, Germany), platelet factor 4 (Chromatec,
Greifswald, Germany), UFH Heparin-Natrium-25000 (Ratiopharm, Ulm,
Germany), and phosphate buffer saline (PBS) pH7.4. All of the chemicals
were of the highest purity available and were used as purchased.
used: cysteamine-hydrochloride (Fluka, Sigma-Aldrich, 30080, Germany),
ethanolamine (Sigma-Aldrich, E9508, Germany), glycine (Sigma-Aldrich,
092K0099, Germany), glutaraldehyde (Sigma-Aldrich grade I 25%), potassium-hexacyanoferrate
(II) trihydrate (Merck, A870884, Darmstadt, Germany), potassium-hexacyanoferrate(III)
trihydrate (Merck, A81167372124, Darmstadt, Germany), RTO and KKO
(Invitrogen, Thermo Fisher, Germany), platelet factor 4 (Chromatec,
Greifswald, Germany), UFH Heparin-Natrium-25000 (Ratiopharm, Ulm,
Germany), and phosphate buffer saline (PBS) pH7.4. All of the chemicals
were of the highest purity available and were used as purchased.
4
Activated Carbon Preparation from Sawdust
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
The sawdust used for the preparation of the activated carbon was obtained from the mushroom culture facility in the department. Phosphoric acid, potassium hydroxide, ferrous sulphate, sodium hydroxide, sodium dihydrogen orthophosphate, disodium hydrogen orthophosphate, graphite, potassium hexacyanoferrate(iii ) trihydrate, potassium hexacyanoferrate(ii ), hydrogen peroxide, hydrazine hydrate, potassium hydroxide, nitric acid and sulphuric acid were of analytical grade and were obtained from Merck (http://www.merckmillipore.com ). The MP standard was purchased from Sigma-Aldrich. All the solutions were prepared in Milli-Q water (resistivity = 18.2 MΩ cm at 25 °C).
About PubCompare
Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.
We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.
However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.
Ready to get started?
Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required
Revolutionizing how scientists
search and build protocols!