The largest database of trusted experimental protocols

Nanosight ns3000

Manufactured by Malvern Panalytical
Sourced in United Kingdom, United States

The NanoSight NS3000 is a particle analysis instrument that uses nanoparticle tracking analysis (NTA) technology to measure the size, concentration, and movement of particles in liquid samples. The instrument uses a laser light source to illuminate the particles, and a video camera captures the movement of the individual particles, which is then analyzed to determine their size and concentration.

Automatically generated - may contain errors

32 protocols using nanosight ns3000

1

EV Isolation and Characterization Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
EV isolation and characterization were previously described [14 (link),15 (link)]. Briefly, NK3.3 cells were cultured overnight in RPMI-1640 media with 3% EV-depleted FBS and 200 U IL-2/mL and then treated with phorbol myristate acetate and ionomycin for 5 h to augment EV release. HEK293 cells were grown to 90% confluency over 48 h in DMEM and 3% EV-depleted FBS. NK3.3 cell suspensions and HEK293 culture media were centrifuged at 300× g for 10 min to pellet cells and debris. Supernatants were removed, centrifuged again at 2000× g for 10 min to remove smaller debris, and passed through a 0.22 μm filter. A commercial polyethylene glycol polymer for EV precipitation was added to the supernatants for a minimum of 12 h at 4 °C (ExoQuick-TC, System Biosciences, Palo Alto, CA, USA). After incubation, supernatants were centrifuged at 3000× g at 4 °C for 10 min per a modified ExoQuick-TC protocol. EV pellets were resuspended in phosphate-buffered saline (PBS). Protein concentrations were assessed using the BCA protein assay kit (Thermo Fisher Scientific, Waltham, MA, USA); particle numbers and sizes were determined by nanoparticle tracking analysis (NTA) (NanoSight NS3000, Malvern Panalytical, Malvern, UK). There was minimal batch-to-batch variation in EV preparations made by PEG precipitation. For both HEK293 and NK3.3 EVs, 1 μg of protein consisted of 1–2 × 1011 EV particles.
+ Open protocol
+ Expand
2

Nanoparticle Tracking Analysis of Extracellular Vesicles

Check if the same lab product or an alternative is used in the 5 most similar protocols
Nanoparticle tracking analysis was performed by NanoSight NS3000 (Malvern Panalytical, Malvern, UK) to visualize EVs by laser light scattering to assess the concentration/size of EVs. EVs were diluted 1:100 or 1:50 with 0.1 μm filtered PBS to specifically fit the optimal working range (20–120 particles/per frame) of the instrument. Five 60 s videos were recorded under the flow mode for each sample with the camera level set at 14 and the detection threshold set at 5. The ratio of total completed tracks/total valid tracks was <10.
Data were analyzed with NTA 3.0 software (NTA 3.4 Build 3.4.4 Malvern Panalytical), which provided high-resolution particle size distribution profiles and EV concentration measurements (n of particles/mL).
+ Open protocol
+ Expand
3

Nanoparticle Size Analysis of EVs

Check if the same lab product or an alternative is used in the 5 most similar protocols
Size of EVs was determined by diluting unstained EVs in 1 ml of filtered PBS pH 7.4 and analyzed with Nanosight NS3000 (Malvern Panalytical) equipment in triplicates.
+ Open protocol
+ Expand
4

Nanotracking Analysis of Plasma Samples

Check if the same lab product or an alternative is used in the 5 most similar protocols
To obtain particle concentration within plasma samples, nanotracking analysis (NTA) was performed. Plasma samples were diluted 1:1000 in 0.1µm filtered PBS and analyzed by NanoSight NS3000 (Malvern Panalytical, Malvern UK) equipped with a sCMOS camera and 488nm laser using NanoSight NTA software version 3.4. Hardware and analysis settings were as follows: Laser type: Blue488, Camera Level: 13, Camera gain: 3, Slider Shutter: 1232, Slider Gain: 219, Frame Rate: 25.0 FPS, Temperature: 25.0°C, Detect Threshold: 4, Blur size: auto, Max Jump Distance: auto.
+ Open protocol
+ Expand
5

Characterization of HA-Dox Nanoparticles

Check if the same lab product or an alternative is used in the 5 most similar protocols
The size and morphology of HA‐Dox were examined by transmission electron microscopy. Briefly, 2.0 μl of HA‐Dox suspensions were allowed to air‐dry on Formvar carbon‐coated cupper grids. Transmission electron microscopy (TEM) was performed on a JEOL JEM‐1400 TEM instrument, operating at a voltage of 100 kV (JEOL USA, Inc.). Particle zeta potential was measured by dynamic light scattering (DLS) on Malvern Zetasizer (Malvern). The mean particle size of HA‐Dox was estimated with a NanoSight NS3000 (Malvern Panalytical Inc., Westborough, MA).
+ Open protocol
+ Expand
6

Quantifying Virus Particle Concentration

Check if the same lab product or an alternative is used in the 5 most similar protocols
Virus particle numbers were determined by Nanoparticle Tracking Analysis (NTA) using a NanoSight NS3000 (Malvern Panalytical) as described for quantifying IAV particle numbers42 (link). Briefly, 100 ul of virus samples were loaded into the NTA chamber five times independently. If necessary, virus samples were diluted in PBS before measurement and analyzed again. Particle numbers were determined as the average of five measurements. Multiple independent batches of each virus strain were measured for biological replicates of experiments. Particle numbers of all virus batches used in this paper were within 1.0 × 109 and 5.0 × 109 virus particles/ml. Virus particle numbers were used to normalize virus binding rate in binding assays and normalize infection levels among virus strains in infection assays.
+ Open protocol
+ Expand
7

Nanoparticle Analysis of Cell Supernatants

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cell culture supernatants were harvested from treated cells at appropriate time points, centrifuged twice (15,500×g, 30 min) to remove cellular debris, and transferred into Eppendorf tubes. Samples were then analyzed using a Nanosight NS3000 instrument (Malvern Panalytical, UK). Particle data for each sample was collected in three 30 s video files. Camera level and detection threshold values remained constant for all analyses to ensure consistency.
+ Open protocol
+ Expand
8

Nanoparticle Tracking Analysis of Extracellular Vesicles

Check if the same lab product or an alternative is used in the 5 most similar protocols
Both size distribution and concentration of EXO were determined by NTA in a NanoSight NS3000 (Malvern Instruments Ltd., Malvern, UK). Samples were diluted 80 times with PBS to reach optimal concentration for instrument linearity, and the data were analyzed with NTA software version 3.1. (Build 3.1.54). Readings were taken on triplicate of 60 s at 25 frames per second, at a camera level set to 16, and with manual monitoring of temperature (Figures 1(b) and 1(c)).
+ Open protocol
+ Expand
9

Exosome Concentration Quantification

Check if the same lab product or an alternative is used in the 5 most similar protocols
The concentration of exosomes was measured using the NanoSight NS3000 (Malvern Panalytical, Westborough, MA, USA). Video images were recorded for 30 s with camera level 14, and particles were analyzed with the nanoparticle tracking analysis software (version 3.2) with a detection threshold of 5. Measurements were performed in triplicate for each sample.
+ Open protocol
+ Expand
10

Exosome Isolation and Characterization

Check if the same lab product or an alternative is used in the 5 most similar protocols
The serum-free CM was used to collect EXOs. In particular, the CM obtained from each condition was centrifuged at 300× g for 10 min to remove the debris. Then, to further remove both cells and cell debris, the medium was centrifuged for 20 min at 16,500× g and finally ultracentrifuged at 120,000× g for 90 min at 4 °C to pellet the EXOs. The total protein content of the EXO samples was determined using the Micro BCA Protein Assay Reagent Kit (Thermo Scientific, Waltham, MA, USA) following the manufacturer’s instructions and using BSA as a standard. To characterize the EXOs, both the size distribution and concentration were determined with nanoparticle tracking analysis (NTA) in a NanoSight NS3000 (Malvern Instruments Ltd., Malvern, UK). The samples were diluted 1:500 with PBS to reach an optimal concentration for instrument linearity. Readings were taken on quintuplicate of 60 s at 25 frames per second at a camera level set to 16 and with manual monitoring of temperature. The data were then analyzed with NTA software version 3.1. (Build 3.1.54, Analitik LTD, Cambridge, UK).
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!