The largest database of trusted experimental protocols

Advia centaur cp

Manufactured by Siemens
Sourced in Germany, United States, United Kingdom, Japan

The ADVIA Centaur CP is a fully automated clinical chemistry analyzer designed for high-throughput, random-access testing. It is capable of performing a wide range of immunoassay tests on a variety of sample types, including serum, plasma, and urine. The system features advanced automation, intuitive software, and efficient workflows to support clinical laboratories in their diagnostic testing needs.

Automatically generated - may contain errors

24 protocols using advia centaur cp

1

Cardiac Biomarkers in Clinical Research

Check if the same lab product or an alternative is used in the 5 most similar protocols
All blood samples were collected one day before and at 3–6 h after the stage at the same time of the CMR examination, and analyzed by the Clinical Laboratory, University Hospital Pasteur 2, Nice, France. High-sensitivity cardiac Troponin I levels (cTnI) levels were determined using the cTnI-Ultra assay for the ADVIA Centaur CP (Siemens Healthineers, Erlangen, Germany) with an analytic limit of detection of 6 ng/L. The claimed 10% CV was 30 ng/L was with an upper reference limit of 40 ng/L. C-reactive Protein (CRP) and creatin kinase (CK) concentrations were analyzed using a Roche-Cobas system (Roche Diagnostics GmbH, Mannheim, Germany) with a normal range up to 5 mg/L and < 190 U/L respectively, according to the information provided by the manufacturer.
+ Open protocol
+ Expand
2

Comprehensive Biochemical Profiling of Fasting Blood Samples

Check if the same lab product or an alternative is used in the 5 most similar protocols
Three milliliters of fasting venous blood was collected from all study subjects at admission and centrifuged at 3500 r/min (centrifugation radius = 16 cm) for 5 min to separate serum at − 80 °C until use. The levels of alanine aminotransferase (ALT), aspartate aminotransferase (AST), alkaline phosphatase (ALP), γ-glutamyl transpeptidase (GGT), fibronectin (Fn), cholinesterase (CHE), free fatty acid (FFA), urea, TCh, TG, HDL-C, LDL-C, small dense low-density lipoprotein cholesterol (sdLDL-C), lactate dehydrogenase (LDH), and lipoprotein a[LP(a)] were analyzed by enzymatic method using the fully automatic biochemical analyzer ADVIA 2400 (Siemens, Germany). The levels of ApoA-1 and ApoB were determined through a polyethylene glycol (PEG)-enhanced immunoturbidimetric assay. The concentration of alpha fetoprotein (AFP) was detected through the Siemens ADVIA Centaur CP (Siemens).
+ Open protocol
+ Expand
3

Thyroid Hormone Assay Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Analyses of plasma TSH levels were performed at Joinn Laboratories (China) Co., Ltd. in Suzhou. The validated chemiluminescence immunoassay (CLIA) method, with a linear range of 0.5–500 ng/ml, was used to determine blood concentrations of TSH. Total T3 and total T4 were measured with a one-step CLIA on the ADVIA Centaur® cp automated chemiluminescence immunoassay system according to the manufacturer’s protocols (Siemens Healthcare Diagnostics, Camberley, Surrey, United Kingdom).
+ Open protocol
+ Expand
4

Serological Hepatitis Virus Testing

Check if the same lab product or an alternative is used in the 5 most similar protocols
The South African cohorts underwent testing for Hepatitis B surface antigen (HBsAg) retrospectively from frozen sera using the Biokit enzyme immune assay (Barcelona, Spain). For Botswana, HBsAg results were performed in Gaborone, using the Murex HBsAg v3 (DiaSorin) assay.
HBsAg-positive samples with sufficient volume underwent testing for HBeAg by the chemilumiscence immune assays Architect (Abbott Diagnostics, Maidenhead, UK) (Durban cohorts) and ADVIA Centaur CP (Siemens, Camberley, UK) (Gaborone and Kimberley cohorts). We also investigated for potential HDV coinfection by screening HBsAg-positive samples for total HDV antibody when sufficient sample volume was available, using the DIA.PRO HDV Ab enzyme immune assay (Milan, Italy).
+ Open protocol
+ Expand
5

Biochemical Assays in Clinical Research

Check if the same lab product or an alternative is used in the 5 most similar protocols
All biochemical tests were done by photometric assays (BT 2000) using Pars kit (Tehran, Iran). TPO-Ab, PTH, and TSH were measured by chemiluminescent immunoassay method (Advia Centaur CP, Siemens Healthcare Diagnostic Inc., USA).
Vitamin D measured by enzyme-linked immunosorbent assay kit (Immunodiagnostic Systems Limited, UK).
+ Open protocol
+ Expand
6

Comprehensive Metabolic Profile Assessment

Check if the same lab product or an alternative is used in the 5 most similar protocols
A 10-ml whole blood was collected from each participant and separated into multiple aliquots of plasma and serum for analysis including miRNA estimation. Plasma for miRNA estimation was stored at ‒80° until analysis, however, rest of the analysis were performed immediately. The Plasma glucose (GOD POD method, Beckman Coulter AU480, Japan), glycosylated hemoglobin (HPLC method, Bio-Rad, Model Variant Turbo II, and India), serum lipid profiling, including serum cholesterol, high density lipoprotein (HDL), low density lipoprotein (LDL), and triglyceride estimations using a Chemiluminescence Immunoassay (Siemens, Model EXL with LM 1 and 2, Germany) and plasma insulin was measured by electro chemiluminescence (ADVIA Centaur CP, Siemen's Healthineers, India). Insulin resistance and beta cell function (HOMA-IR and HOMA-%B) were assessed by the homeostatic method using standard formulae for calculation.[7 (link)]
+ Open protocol
+ Expand
7

Myocardial Injury Markers in Cardiac Surgery

Check if the same lab product or an alternative is used in the 5 most similar protocols
The primary outcomes analyzed in the present study were perioperative changes in the concentrations of the serum markers of myocardial injury, including TnI, CK and CK-MB. Briefly, arterial blood samples (3 ml for each time point) of the patients were collected from the radial artery or from the arterial catheters during CPB at the following time points: Baseline (prior to the start of the CPB procedure), prior to aortic cannulation, 30 min prior to the placement of the aortic cross-clamp at the time of releasing the aortic cross-clamp, and 120 min after the release of the aortic cross-clamp. The levels of the markers of myocardial injury were measured using the Roche Biochemical Analyzer (ADVIA centaur-CP; Siemens AG, Munich, Germany) according to the manufacturer's instructions. The secondary outcomes analyzed were the changes in the levels of the hemodynamic parameters, including HR, MAP and central venous pressure (CVP), during the surgery and during the 12-h ICU follow-up. In addition to the abovementioned parameters, other related clinical outcomes were also evaluated, including the characteristics of CPB, usage of vasoactive medications, rebeating status of the heart and the incidence of postoperative adverse events.
+ Open protocol
+ Expand
8

Cortisol Quantification by Chemiluminescence

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cortisol analysis was with the ADVIA Centaur CP two site chemiluminescent immunoassay (Siemens). This procedure involves competitive binding of cortisol in unknown samples with acridinium ester-labeled cortisol to a polyclonal rabbit anti-cortisol antibody in the solid phase. The polyclonal anti-cortisol antibody is bound to monoclonal mouse anti-rabbit antibody covalently coupled to paramagnetic particles for separation. Acid and base reagents initiate the chemiluminescent reaction and the intensity of the reaction is measured in relative light units (RLUs). An inverse relationship exists between the amount of cortisol present in the unknowns and the relative light units detected by system. Intra- and inter-assay variability were 1.3% and 2.4%, respectively.
+ Open protocol
+ Expand
9

Biochemical Assays for Metabolic Markers

Check if the same lab product or an alternative is used in the 5 most similar protocols
All biochemical tests were done by photometric assays (BT 2000) using Pars kit (Tehran, Iran). TPO-Ab, insulin, PTH, and TSH were measured by chemiluminescent immunoassay method (Advia centaur CP, Siemens Healthcare Diagnostic Inc., USA).
HbA1c was measured by high-performance liquid chromatography (Arkray, Adams Japan). Vitamin D measured by enzyme-linked immunosorbent assay kit (immunodiagnostic system limited, UK).
+ Open protocol
+ Expand
10

Cytokine and Hormone Analysis in Renal Cell Carcinoma

Check if the same lab product or an alternative is used in the 5 most similar protocols
We analyzed the presence of two cytokines (IL-6 and IL-8) and testosterone in the serum of 25 ccRCC and 9 pRCC patients using Solid-Phase Chemiluminescent Immunometric Assay kits with an Immulite 1000 Immunoassay System and ADVIA Centaur CP (all Siemens Healthcare GmbH, Erlangen, Germany) according to manufacturer’s instructions.
Serum levels of RLN2 were analyzed with a Human Relaxin-2 Quantikine ELISA Kit (R&D Systems, Abingdon, United Kingdom) according to manufacturer’s instructions. Assay Diluent was mixed with the standard, control or samples in a provided 96-well plate and incubated for 2 hrs at RT. After washing, the Human Relaxin-2 Conjugate was added to each well and incubated for 2 hrs at RT. Following repeated washing and 30 min incubation with Substrate Solution, the reaction was stopped with Stop Solution and the optical density was determined using an Infinite M Plex microplate reader (Tecan Deutschland GmbH, Crailsheim, Germany).
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!