The largest database of trusted experimental protocols

Ret 3 probe

Manufactured by Physitemp
Sourced in United States

The RET-3 probe is a temperature measurement device designed for use in a laboratory setting. Its core function is to accurately measure and display the temperature of a sample or object under observation.

Automatically generated - may contain errors

6 protocols using ret 3 probe

1

Cold Exposure Regulation of Metabolic Pathways

Check if the same lab product or an alternative is used in the 5 most similar protocols
Ten-week-old male mice (n = 28) were acclimated to thermoneutrality (30 °C) for 4 weeks and then single with free access to food and water. The core body temperature prior and during mild cold (RT) or severe cold (4 °C) exposure was monitored using BAT-12 Microprobe Thermometer with probe RET-3 (Physitemp) at the indicated times (15, 30, 60, and 120 min). BAT and tail temperature was recorded with a thermal imaging camera (FLIR i3, FLIR Systems) and analyzed with FLIR QuickReport software. After temperature measurement, mice were euthanized, and iBAT was assayed for Akt/pS473, AKT, ACLY/pS455, ACLY, S6RP/p(S240/244), and phosphor-PKA substrates. In another set of experiment, male mice (n = 12) were acclimated to thermoneutrality (30 °C) for 2–4 weeks. For acute mild cold challenge, mice (n = 4) and for acute severe cold challenge, mice (n = 4) were housed individually, placed at either RT or 4 °C for 1 h, with free access to food and water. Control mice (n = 4) were maintained at thermoneutrality. Mice were euthanized and iBAT was assayed to immunoblot for Akt/pS473, AKT, ACLY/pS455, ACLY, S6RP/p(S240/244), and phosphor-PKA substrates.
+ Open protocol
+ Expand
2

Jiadifenolide-Induced Hypothermia in Mice

Check if the same lab product or an alternative is used in the 5 most similar protocols
Male CF-1 mice were removed from their home cage and dosed with jiadifenolide (150 mg/kg, i.p.) and placed in a holding cage. Thirty min and 60 min post dosing, body temperature was taken using a rectal probe (Physitemp Instruments Inc. (Clifton, NJ, USA) Model BAT-12, Probe RET-3 inserted 1.8 cm. Temperature was recorded in degrees Celsius.
+ Open protocol
+ Expand
3

Cold Exposure Study in Mice

Check if the same lab product or an alternative is used in the 5 most similar protocols
Baseline measurements of internal core-body temperatures were recorded on 10 week-old male mice maintained at 22°C (starting at ZT 4) using a digital thermometer (Oakton Instruments, Temp 10T Thermocouple) and rectal thermocouple probe (Physitemp, RET-3 probe). Cold-exposure studies were performed within climate-controlled rodent incubators. Mice were placed in pre-chilled cages at 4–5°C with bedding, a cotton nestlet, free access to standard chow and water, and cage lid partially open. Rectal temperatures were recorded every 60 minutes. Individual mice were removed from the study and euthanized if core body temperature fell ≥10°C from baseline measurement. Core temperatures ≥10°C from baseline measurement were not included in core temperature analysis and scored as an event for survival analysis.
+ Open protocol
+ Expand
4

Cold Exposure Study in Mice

Check if the same lab product or an alternative is used in the 5 most similar protocols
Baseline measurements of internal core-body temperatures were recorded on 10 week-old male mice maintained at 22°C (starting at ZT 4) using a digital thermometer (Oakton Instruments, Temp 10T Thermocouple) and rectal thermocouple probe (Physitemp, RET-3 probe). Cold-exposure studies were performed within climate-controlled rodent incubators. Mice were placed in pre-chilled cages at 4–5°C with bedding, a cotton nestlet, free access to standard chow and water, and cage lid partially open. Rectal temperatures were recorded every 60 minutes. Individual mice were removed from the study and euthanized if core body temperature fell ≥10°C from baseline measurement. Core temperatures ≥10°C from baseline measurement were not included in core temperature analysis and scored as an event for survival analysis.
+ Open protocol
+ Expand
5

AIT-Mediated Protection Against Anaphylaxis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Three weeks after the last AIT session, mice were challenged by an i.p. injection of 10 IR cat dander allergen extract (or 52.4 μg birch pollen allergen extract) to measure AIT-mediated protection against anaphylaxis. Before the challenge, and at 20–30 min intervals thereafter, body temperature was measured rectally with a digital Thermalert TH-5 thermometer with a RET-3 probe (Physitemp, Huron, NJ). A time–temperature curve was plotted and the area under curve (AUC) was calculated in GraphPad Prism v7.02 from GraphPad Software (La Jolla, CA). One day after the challenge, mice were euthanized and spleens were harvested for restimulation of splenocytes and analysis of cytokine secretion.
+ Open protocol
+ Expand
6

Cardiac Function Assessment in Murine MI

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cardiac functional parameters of adult mice were assessed at baseline (1 day before induction of MI) and at 2 weeks. Briefly, anesthesia was induced using isoflurane in medical O2 at concentrations of 2%–3%. Isoflurane was used for anesthesia maintenance at around 2%. Rectal temperature was monitored (36.5°C–38°C) with a Physitemp RET-3 probe. Thoracic hair was removed using commercially available electric shavers (Philips Hairclipper, HC9490/15) and depilatory cream (Veet Hair Removal Cream for sensitive skin). Conductive ultrasound gel (Parkers Lab) was then applied to each paw to record ECG signals. Prewarmed Aquasonic 100 ultrasound transmission gel was applied onto the abdomen avoiding bubble formation. Image acquisition was performed on a Visualsonics Vevo 770 ultrasound biomicroscope. Cardiac function was assessed using standard parasternal long-axis images of the LV in M-mode and ECG-gated kilohertz visualization B-mode. Functional measurements were extracted using Vevo 770 software.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!