PbI2 (99.999%), PbBr2 (99.999%), SnI2 (99.999%), CsI (99.999%), barium iodide (BaI2; 99.995%), rubidium iodide (RbI; 99.9%), BCP, tris(pentafluorophenyl)borane (95%), choline chloride (≥98%), 1,4-diaminobutane (BDA; 99%), methylamine solution [33 weight % (wt %) in absolute ethanol], N,N-dimethylformamide (DMF; anhydrous, 99.8%), dimethyl sulfoxide (DMSO; anhydrous, 99.8%), toluene (anhydrous, 99.8%), isopropyl alcohol (anhydrous, 99.5%), ethyl acetate (anhydrous, 99.8%), and sulfonic acid cation exchange resins (Amberlyst 15, hydrogen form) were purchased from Sigma-Aldrich. [2-(3,6-Dimethoxy-9H-carbazol-9-yl)ethyl] phosphonic acid (MEO-2PACz) (>98%) was purchased from TCI. PEDOT:PSS (Clevios P VP AI 4083) and PEDOT (HTL Solar 3) were purchased from Ossila. Formamidinium iodide (FAI), phenethylammonium bromide (PEABr), and phenethylammonium chloride (PEACl) were purchased from GreatCell Solar. C60 was purchased from Nano-C Inc. Aqueous single-layer graphene oxide (GO) solution with a concentration of 500 mg/liter was purchased from Graphene Supermarket. MAPbCl3 single crystals were synthesized using a previously reported method (55 ). Copper (Cu) pellets and the ITO target were purchased from Kurt J. Lesker Company. Polytetrafluoroethylene (PTFE) and nylon filters were purchased from VWR.
Rubidium iodide
Manufactured by Merck Group
Sourced in United States
Rubidium iodide is a chemical compound with the formula RbI. It is a crystalline solid that is soluble in water. Rubidium iodide is used in various scientific and industrial applications, including as a component in optical materials and as a source of rubidium ions for research purposes.
Automatically generated - may contain errors
Lab products found in correlation
Dimethyl sulfoxide (dmso), by Merck Group (2 mentions)
N n dimethylformamide (dmf), by Merck Group (2 mentions)
Methylamine solution, by Merck Group (1 mentions)
Amberlyst 15 hydrogen form, by Merck Group (1 mentions)
Toluene, by Merck Group (1 mentions)
Ethyl acetate, by Merck Group (1 mentions)
Isopropyl alcohol, by Merck Group (1 mentions)
Formamidinium iodide fai, by Greatcell Solar (1 mentions)
Chlorobenzene, by Merck Group (1 mentions)
Acetylacetonate, by Merck Group (1 mentions)
Titanium diisopropoxide, by Merck Group (1 mentions)
Formamidinium iodide fai, by Merck Group (1 mentions)
Sulfonimide lithium salt li tfsi, by Merck Group (1 mentions)
Fk209, by Merck Group (1 mentions)
Lead 2 iodide, by Merck Group (1 mentions)
4 tert butylpyridine tbp, by Merck Group (1 mentions)
Cesium iodide, by Merck Group (1 mentions)
Acetonitrile, by Merck Group (1 mentions)
Ethanol, by Merck Group (1 mentions)
Spiro ometad, by Merck Group (1 mentions)
2 protocols using rubidium iodide
1
Synthesis of Lead-based Perovskite Materials
2
Synthesis of Rb-Cs-FA-PbI3 Perovskite
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
For the synthesis of the Rb0.05Cs0.1FA0.85PbI3 perovskite, the following materials were used: lead (II) iodide (Sigma-Aldrich, 99%, St. Louis, MO, USA), formamidinium iodide (FAI) (Sigma-Aldrich, ≥99%, St. Louis, MO, USA), cesium iodide (Sigma-Aldrich, ≥99%, St. Louis, MO, USA), rubidium iodide (Sigma-Aldrich, ≥99%, St. Louis, MO, USA), N,N-dimethylformamide (DMF) (Merck, p.a., Darmstadt, Germany), dimethyl sulfoxide (DMSO) (Merck, p.a., Darmstadt, Germany), chlorobenzene (Merck, p.a., Darmstadt, Germany).
15 × 15 mm indium tin oxide (ITO) coated glass plates (Lumtech, ρ ~15 Ω/sq, CA, USA) were used as substrate and transparent front electrode. For the synthesis of the TiO2 ETL titanium diisopropoxide (Sigma-Aldrich, 99%, St. Louis, MO, USA), acetylacetonate (Sigma-Aldrich, 99%, St. Louis, MO, USA) and ethanol (Merck, p.a., Darmstadt, Germany) were used. For the preparation of the spiro-OMeTAD HTL, spiro-OMeTAD (Merck, ≥99%, Darmstadt, Germany), 4-tert-butylpyridine (tBP) (Sigma-Aldrich, 99%, St. Louis, MO, USA), FK209 (Sigma-Aldrich, 99%, St. Louis, MO, USA), bis-(trifluoromethane)sulfonimide lithium salt (LiTFSI) (Sigma-Aldrich, 99%, St. Louis, MO, USA) and acetonitrile (Merck, p.a., Darmstadt, Germany) were used.
15 × 15 mm indium tin oxide (ITO) coated glass plates (Lumtech, ρ ~15 Ω/sq, CA, USA) were used as substrate and transparent front electrode. For the synthesis of the TiO2 ETL titanium diisopropoxide (Sigma-Aldrich, 99%, St. Louis, MO, USA), acetylacetonate (Sigma-Aldrich, 99%, St. Louis, MO, USA) and ethanol (Merck, p.a., Darmstadt, Germany) were used. For the preparation of the spiro-OMeTAD HTL, spiro-OMeTAD (Merck, ≥99%, Darmstadt, Germany), 4-tert-butylpyridine (tBP) (Sigma-Aldrich, 99%, St. Louis, MO, USA), FK209 (Sigma-Aldrich, 99%, St. Louis, MO, USA), bis-(trifluoromethane)sulfonimide lithium salt (LiTFSI) (Sigma-Aldrich, 99%, St. Louis, MO, USA) and acetonitrile (Merck, p.a., Darmstadt, Germany) were used.
About PubCompare
Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.
We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.
However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.
Ready to get started?
Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required
Revolutionizing how scientists
search and build protocols!