All chemicals used in the present study were of analytical grade and used without further purification. Metal salts: europium nitrate Eu(NO3)3 was prepared by reactions of europium oxide (Belami Fine Chemical) and nitric acid. Strontium chloride SrCl2, copper chloride CuCl2·2H2O, lead nitrate Pb(NO3)2, nickel nitrate hexahydrate Ni(NO3)2·6H2O, ferric chloride hexahydrate FeCl3·6H2O, magnesium nitrate Mg(NO3)2, manganese chloride MnCl2, mercuric nitrate Hg(NO3)2, tin(iv ) chloride pentahydrate SnCl4·5H2O and cobalt chloride CoCl2 were obtained from Sigma. 3-Aminopropyl trimethoxysilane (APTS) as a silylating agent, purchased from Fluka. Acetic acid, NaOH and hydrochloric acid were obtained from Sigma-Aldrich.
Magnesium nitrate mg no3 2
Manufactured by Merck Group
Sourced in Italy, United States
Magnesium nitrate (Mg(NO3)2) is an inorganic chemical compound. It is a crystalline solid that is highly soluble in water. Magnesium nitrate is commonly used as a laboratory reagent and can be found in various scientific applications.
Automatically generated - may contain errors
Lab products found in correlation
Cobalt chloride cocl2, by Merck Group (1 mentions)
Manganese chloride mncl2, by Merck Group (1 mentions)
Nickel nitrate hexahydrate ni no3 2 6h2o, by Merck Group (1 mentions)
Ferric chloride hexahydrate fecl3 6h2o, by Merck Group (1 mentions)
Strontium chloride srcl2, by Merck Group (1 mentions)
Lead nitrate pb no3 2, by Merck Group (1 mentions)
Tin 4 chloride pentahydrate sncl4 5h2o, by Merck Group (1 mentions)
Acetic acid, by Merck Group (1 mentions)
Hexamethylenetetramine, by Merck Group (1 mentions)
Zinc acetate, by Merck Group (1 mentions)
1 propanol reagent, by Merck Group (1 mentions)
Potassium ferricyanide, by Merck Group (1 mentions)
Potassium chloride (kcl), by Merck Group (1 mentions)
Sodium phosphate dibasic, by Merck Group (1 mentions)
Sodium phosphate monobasic, by Merck Group (1 mentions)
Iron 3 chloride, by Merck Group (1 mentions)
Deuterated water d2o, by Merck Group (1 mentions)
3 protocols using magnesium nitrate mg no3 2
1
Synthesis of Metal-Silica Nanomaterials
2
EVOH 32 Polymer Synthesis Protocol
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Poly(vinyl alcohol-co-ethylene) with 32 mol% ethylene content (EVOH 32) (density: 1.19 g/mL at 25 °C, melt index: 3.8 g/10 min (210 °C)), 1-Propanol reagent, ≥99.5%, magnesium nitrate (Mg(NO3)2), zinc acetate, and hexamethylenetetramine were provided from Sigma-Aldrich® (Milan, Italy).
3
Enzymatic Pyruvate Oxidation with GQD
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Pyruvate oxidase (PoxB,
EC: 1.2.3.3) from microorganisms, sodium pyruvate (Py), glutaraldehyde
(GA, 25% in H2O), Nafion (5 wt %), GQDs (cat. no. 900713,
less than 5 nm in diameter), sodium phosphate monobasic (NaH2PO4), sodium phosphate dibasic (Na2HPO4), potassium chloride (KCl), potassium ferricyanide (K3[Fe(CN)6]), iron (III) chloride (FeCl3), magnesium nitrate (Mg(NO3)2), deuterated
water (D2O), and N,N-dimethylglycine
(DMG, C4H9NO2) were purchased from
Sigma-Aldrich (USA). TPP was purchased from Koram Biotech Corporation
(South Korea). All other reagents were of analytical grade and used
without further purification. The pH optimization experiment used
phosphate-buffered solutions (PBS, 50 mM) at different pH values,
which were prepared by mixing NaH2PO4 with Na2HPO4 and 100 mM KCl. All aqueous solutions were
prepared using deionized water (Milli-Q water purifying system, 18
MΩ cm).
EC: 1.2.3.3) from microorganisms, sodium pyruvate (Py), glutaraldehyde
(GA, 25% in H2O), Nafion (5 wt %), GQDs (cat. no. 900713,
less than 5 nm in diameter), sodium phosphate monobasic (NaH2PO4), sodium phosphate dibasic (Na2HPO4), potassium chloride (KCl), potassium ferricyanide (K3[Fe(CN)6]), iron (III) chloride (FeCl3), magnesium nitrate (Mg(NO3)2), deuterated
water (D2O), and N,N-dimethylglycine
(DMG, C4H9NO2) were purchased from
Sigma-Aldrich (USA). TPP was purchased from Koram Biotech Corporation
(South Korea). All other reagents were of analytical grade and used
without further purification. The pH optimization experiment used
phosphate-buffered solutions (PBS, 50 mM) at different pH values,
which were prepared by mixing NaH2PO4 with Na2HPO4 and 100 mM KCl. All aqueous solutions were
prepared using deionized water (Milli-Q water purifying system, 18
MΩ cm).
About PubCompare
Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.
We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.
However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.
Ready to get started?
Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required
Revolutionizing how scientists
search and build protocols!