The largest database of trusted experimental protocols

Innospire go

Manufactured by Philips
Sourced in United Kingdom

The InnoSpire Go is a portable nebulizer device designed for the delivery of aerosolized medications. It utilizes mesh technology to generate a fine, consistent mist for efficient medication administration. The device is compact, lightweight, and powered by a rechargeable battery, allowing for convenient and on-the-go use.

Automatically generated - may contain errors

Lab products found in correlation

4 protocols using innospire go

1

Nebulized SARS-CoV-2 Nanobody Evaluation

Check if the same lab product or an alternative is used in the 5 most similar protocols
Nanobody was nebulized with a portable mesh nebulizer (Philips, InnoSpire Go) producing 2-5 μm particles at a final concentration of 0.4 mg ml−1. The resulting aerosol was collected by condensation into a 50-ml tube cooled on ice. Pre- and post-nebulization samples were analysed by NuPAGE gel and visualized by InstantBlue staining. SARS-CoV-2 surrogate virus neutralization test was also performed to compare the neutralization potency of pre- and post-nebulization samples. For thermostability tests, nanobodies supplemented with loading buffer (Thermo Fisher Scientifc, NP0007) and β-mercaptoethanol were heated at 98 °C for 10 min and then analysed on a NuPAGE gel and visualized by InstantBlue staining.
+ Open protocol
+ Expand
2

Evaluating Nebulizers for Cystic Fibrosis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Experiments were conducted using a selection of appropriate and commonly used nebulisers in the treatment of cystic fibrosis, and the escalating treatment of lung infection. In the homecare setting, both a compressed air-driven jet nebuliser (Up-draft II jet nebuliser, Hudson, Teleflex Medical, Wake County, NC, USA) as well as a portable vibrating mesh nebuliser (InnoSpire Go, Philips, Farnborough, UK) were evaluated. In the hospital setting, a second VMN was used (Aerogen Solo, Aerogen Ltd., Galway, Ireland).
+ Open protocol
+ Expand
3

Mesh Nebulizer Aerosolization of Viruses

Check if the same lab product or an alternative is used in the 5 most similar protocols
A commercial mesh nebulizer (Philips Innospire Go) was used to accommodate small volumes of virus-containing liquids. This device was expected to produce aerosols with an average mean aerodynamic diameter of 3.99 ± 0.26 μm.50 Only HEPA filters (liquid-coated or dry, n = 5) were used for these experiments due to their better performance in testing with bacteria-containing aerosols. A volume of 0.5 mL JCPyV or SARS-CoV-2 viral stock described in Section 2.3 was placed into the nebulizer and run until all of the stock was depleted or after 1 min, whichever came first.
+ Open protocol
+ Expand
4

Replicating Aerosol Therapy for Adult CF Patients

Check if the same lab product or an alternative is used in the 5 most similar protocols
To replicate aerosol therapy in a spontaneously breathing adult CF patient undergoing standard care in the homecare setting, both the JN plus open facemask (Up-draft II jet nebuliser, Hudson, Teleflex Medical, Wake County, NC, USA) and portable VMN in combination with a mouthpiece (InnoSpire Go, Philips, Farnborough, UK) were used. The JN was operated at 7 L per minute compressed air flow rate, in line with the accompanying instruction manual. To replicate aerosol therapy in a spontaneously breathing adult CF patient post-exacerbation in the hospital setting a VMN in combination with an aerosol chamber and filtered mouthpiece (Aerogen Ultra, Aerogen Limited, Galway, Ireland) (Respirgard 303 filter, Baxter, Dublin, Ireland) with no supplemental oxygen was used to deliver drug to the simulated adult CF patient. See Figure 4A,B.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!