Structural MRIs were acquired using a Philips 3T MRI system (Philips Healthcare; Best, The Netherlands; Version 3.2.1) equipped with a SENSE32 channel head coil. Anatomical images were obtained using sagittal 3D gradient‐echo T1‐weighted sequence (repetition time = 9.8 ms, echo time = 4.6 ms, matrix size 256 × 256, voxel size 1.17 × 1.17 × 1.2 mm, 140 slices, scan duration: 4:56 min). For each participant, high‐resolution anatomical images were examined for macroscopic abnormalities; examinations were performed by a neuroradiologist who was blinded to the clinical details of each participant. However, no such abnormalities were detected.
32 channel sense head coil
Manufactured by Philips
Sourced in Netherlands
The 32-channel SENSE head coil is a radio frequency (RF) coil designed for use with Philips magnetic resonance imaging (MRI) systems. It is equipped with 32 individual receiver channels to enable parallel imaging techniques such as SENSE (Sensitivity Encoding) for faster image acquisition. The coil is specifically optimized for head and brain imaging applications.
Automatically generated - may contain errors
Lab products found in correlation
Achieva mri scanner, by Philips (10 mentions)
Achieva tx mri scanner, by Philips (5 mentions)
Achieva scanner, by Philips (4 mentions)
Achieva 3t mri scanner, by Philips (4 mentions)
Achieva xt scanner, by Philips (4 mentions)
Intera, by Philips (4 mentions)
Intera mri scanner, by Philips (4 mentions)
3t mr system, by Philips (3 mentions)
3.0 tesla mri scanner, by Philips (3 mentions)
3 tesla mri scanner, by Philips (2 mentions)
Achieva mr system, by Philips (2 mentions)
3.0t mri scanner, by Philips (2 mentions)
3 tesla scanner, by Philips (2 mentions)
Mr safe bold screen, by Cambridge Research Systems (2 mentions)
Achieva 3.0t scanner, by Philips (2 mentions)
Ingenia, by Philips (2 mentions)
3t mri system, by Philips (1 mentions)
Intera mr scanner, by Philips (1 mentions)
3.0 tesla scanner, by Philips (1 mentions)
Ingenia cx mri scanner, by Philips (1 mentions)
85 protocols using 32 channel sense head coil
1
High-Resolution Structural MRI Acquisition
2
Structural and Functional Brain Imaging
3
Neuroimaging Protocol for Brain Activity Mapping
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Neuroimaging data were acquired using a 3T Philips Intera MR-scanner (Best, the Netherlands), equipped with a SENSE 32-channel head coil. Functional images were acquired using a T2*-weighted echo-planar sequence and consisted of 39 descending axial slices, 3 mm thick, and no slice gap (repetition time = 2 s; echo time = 30 ms; flip angle = 90°; FOV = 192 × 192 × 117 mm, with an inplane matrix consisting of 64 × 61 voxels at 3 × 3 × 3 mm). All scans were oriented 10–20° to the AC-PC transverse plane to prevent artefacts from nasal cavities. The task consisted of 275 functional volumes. In addition, a high-resolution anatomical T1 image was recorded using the following parameter settings: voxel size 1 × 1 × 1 mm; 170 slices; TR = 9 ms; TE = 3.5 ms; slice thickness = 1 mm; 256 × 256 matrix; FOV 256 × 232 × 170 mm.
4
MRI Scanning Using 3.0T Phillips
5
Structural and Functional MRI of Children
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Structural and functional images were collected via a 3.0T Philips Ingenia CX MRI Scanner with a SENSE 32‐channel head coil, located at the Department of Radiology of the University Hospital in Leuven, Belgium. Soft padding was used to stabilize the children's heads in order to minimize head motion. For the fMRI data, slices were recorded in ascending order, using a EPI sequence (52 slices, 2.19 × 2.19 × 2.2 mm voxel size, 2.2 mm slice thickness, 0.3 mm interslice gap, TR = 3,000 ms, TE = 29.8 ms, 90° flip angle, 96 × 96 acquisition matrix) and covered the whole brain (field of view: 210 × 210 × 130 mm). Each run consisted of 107 measurements. Furthermore, a high‐resolution T1‐weighted anatomical image (MPRAGE sequence, 182 slices, resolution 0.98 × 0.98 × 1.2 mm3, TE = 4.6 ms, 256 × 256 acquisition matrix, 8° flip angle, 250 × 250 × 218 mm field of view) was acquired for each participant.
6
Structural and Functional Brain Imaging
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
All functional and structural images were obtained using a 3T Philips Achieva MRI scanner (Best, the Netherlands) using a sensitivity encoding (SENSE) 32-channel head coil at the Neuroscience Imaging Center (NIC) at the University of California, Irvine. The anatomical scans were performed using a T1-weighted fluid attenuated inversion recovery (FLAIR) sequence (flip angle = 90°; matrix size = 240 × 240; number of slices = 180; slice thickness = 2 mm). Functional images were acquired using a T2-weighted EPI sequence (TE = 29 ms; TR = 2000 ms; matrix size = 64 × 64; number of slices = 51; flip angle = 71°).
7
Resting-state fMRI Acquisition on 3T MRI Scanner
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
All resting state data were acquired on a 3 Tesla Philips Achieva TX MRI scanner (Best, The Netherlands) at the Leiden University Medical Center, equipped with a SENSE-32 channel head coil. Prior to resting state functional images, high-resolution anatomical images were collected for co-registration with the functional ones. These included a 3D gradient-echo T1-weighted sequence with the following parameters: TR = 7.9 ms, TE = 3.5 ms, FA = 8°, FOV = 250 × 195.83 × 170.5, 155 slices 1.1 × 1.1 × 1.1 mm3. During the resting state fMRI acquisition, 700 T2*-weighted whole brain multiband EPIs were acquired, excluding 6 dummy scans preceding the dynamic ones. The scanning parameters in the resting state fMRI acquisition are as follows: TR = 690 ms, TE = 30 ms, multiband factor = 4, FA = 55°, FOV = 220 × 220 × 121, 44 slices 2.75 × 2.75 × 2.75 mm.
8
High-Resolution Neuroimaging Acquisition Protocol
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
The neuroimaging data were acquired in the Leiden University Medical Center, using a 3 Tesla Philips Achieva TX MRI scanner which was equipped with a SENSE-32 channel head coil. First the high-resolution anatomical images were acquired including a 3D gradient-echo T1-weighted sequence with the following parameters: TR = 7.9 ms, TE = 3.5 ms, FA = 8°, FOV = 250 × 195.83 × 170.5 mm 3 , 155 slices 1.1 × 1.1 × 1.1 mm 3 . Then 555 T2*-weighted whole brain multiband gradient EPIs were collected with the following scanning parameters: TR = 690 ms, TE = 30 ms, multiband factor = 4, FA = 55˚, FOV = 220 × 220 × 121 mm 3 , 44 slices 2.75 × 2.75 × 2.75 mm 3 . A high-quality MRI-safe HD 32″ LCD monitor was located at the end of the scanner for displaying the visual stimuli. Participants viewed the stimuli through a mirror which was attached to the head coil.
9
High-resolution 3T MRI Neuroimaging Protocol
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
We acquired all the data on a 3 Tesla Philips Achieva TX MRI scanner (Best, The Netherlands) in the Leiden University Medical Center, which was equipped with a SENSE-32 channel head coil. First, we collected the high-resolution anatomical images for co-registration with the functional ones, before the functional images were acquired. The highresolution anatomical images included a 3D gradient-echo T1-weighted sequence with the following parameters: TR = 7.9 ms, TE = 3.5 ms, FA = 8 ˚, FOV = 250 × 195.83 × 170.5, 155 slices 1.1 × 1.1 × 1.1 mm 3 . We also acquired 555 T2 * -weighted whole brain multiband gradient EPIs, preceded by 6 dummy scans to allow for equilibration of T1 saturation effects. The scanning parameters regarding the functional run are as follows: TR = 690 ms, TE = 30 ms, multiband factor = 4, FA = 55 ˚, FOV = 220 × 220 × 121, 44 slices 2.75 × 2.75 × 2.75 mm 3 . To present visual stimuli, we used a high-quality BOLD screen 32 located at the end of the scanner that participants viewed through a mirror at their head.
10
fMRI Acquisition for Artificial Grammar Learning
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Imaging data were acquired using a Philips 3T MR-system (Best, The Netherlands) located at the Leiden University Medical Centre (LUMC) equipped with a SENSE-32 channel head coil. Three fMRI sequences were acquired for every participant, each during the consecutive learning phase of the AGL task. We obtained echo-planar images (EPI) using a T2*-weighted gradient echo sequence
About PubCompare
Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.
We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.
However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.
Ready to get started?
Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required
Revolutionizing how scientists
search and build protocols!