The largest database of trusted experimental protocols

Axioplan 2 immunofluorescent microscope

Manufactured by Zeiss

The Axioplan II is an immunofluorescent microscope designed for use in research laboratories. It features a high-precision optical system and advanced illumination technology to facilitate the visualization and analysis of fluorescently labeled samples.

Automatically generated - may contain errors

5 protocols using axioplan 2 immunofluorescent microscope

1

Transwell Migration and Invasion Assay

Check if the same lab product or an alternative is used in the 5 most similar protocols
Transwell migration and invasion assays were performed as described in Okimoto et al.35 (link) Briefly, 8-μm-pore Matrigel coated (invasion) or non-coated (migration) Transwell inserts (BD Biosciences) were added at the top of a Transwell chamber filled with 10% FBS, RPMI media. To each insert, 2.4 × 104 cells in serum-free media were added. The Transwell chambers were incubated for 20 hrs at 37 °C in the incubator. Cells that did not migrate through the pore or invade the matrigel were scraped off; the membranes were fixed in methanol for 15 min and then stained with crystal violet for 30 min. The surface of the membrane was imaged in 5 distinct fields, with a Zeiss Axioplan II immunofluorescent microscope at 10×. Invasion and migration were assessed counting the average imaged cells in the 5 regions. Results presented are from three independent experiments.
+ Open protocol
+ Expand
2

Transwell Invasion and Migration Assay

Check if the same lab product or an alternative is used in the 5 most similar protocols
RPMI with 10% FBS was added to the bottom well of a trans-well chamber. 2.5×104 cells resuspended in serum free media was then added to the top 8 µm pore matrigel coated (invasion) or non-coated (migration) trans-well insert (BD Biosciences). After 20 hours, non-invading cells on the apical side of inserts were scraped off and the trans-well membrane was fixed in methanol for 15 minutes and stained with Crystal Violet for 30 minutes. The basolateral surface of the membrane was visualized with a Zeiss Axioplan II immunofluorescent microscope at 10×. Each trans-well insert was imaged in five distinct regions at 10× and performed in triplicate. % invasion was calculated by dividing the mean # of cells invading through Matrigel membrane / mean # of cells migrating through control insert.
+ Open protocol
+ Expand
3

Transwell Invasion and Migration Assay

Check if the same lab product or an alternative is used in the 5 most similar protocols
RPMI with 10% FBS was added to the bottom well of a trans-well chamber. 2.5×104 cells resuspended in serum free media was then added to the top 8 µm pore matrigel coated (invasion) or non-coated (migration) trans-well insert (BD Biosciences). After 20 hours, non-invading cells on the apical side of inserts were scraped off and the trans-well membrane was fixed in methanol for 15 minutes and stained with Crystal Violet for 30 minutes. The basolateral surface of the membrane was visualized with a Zeiss Axioplan II immunofluorescent microscope at 10×. Each trans-well insert was imaged in five distinct regions at 10× and performed in triplicate. % invasion was calculated by dividing the mean # of cells invading through Matrigel membrane / mean # of cells migrating through control insert.
+ Open protocol
+ Expand
4

Invasion and Migration Assay

Check if the same lab product or an alternative is used in the 5 most similar protocols
RPMI with 10% FBS was added to the bottom well of a trans-well chamber. 2.5×10^4 cells resuspended in serum free media was then added to the top 8 µm pore matrigel coated (invasion) or non-coated (migration) trans-well insert (BD Biosciences). After 20 hr, non-invading cells on the apical side of inserts were scraped off and the trans-well membrane was fixed in methanol for 15 min and stained with Crystal Violet for 30 min. The basolateral surface of the membrane was visualized with a Zeiss Axioplan II immunofluorescent microscope at 5×. Each trans-well insert was imaged in five distinct regions at 5×and performed in triplicate. % invasion was calculated by dividing the mean # of cells invading through Matrigel membrane / mean # of cells migrating through control insert.
+ Open protocol
+ Expand
5

Transwell Migration and Invasion Assay

Check if the same lab product or an alternative is used in the 5 most similar protocols
Transwell migration and invasion assays were performed as described in Okimoto et al.35 (link) Briefly, 8-μm-pore Matrigel coated (invasion) or non-coated (migration) Transwell inserts (BD Biosciences) were added at the top of a Transwell chamber filled with 10% FBS, RPMI media. To each insert, 2.4 × 104 cells in serum-free media were added. The Transwell chambers were incubated for 20 hrs at 37 °C in the incubator. Cells that did not migrate through the pore or invade the matrigel were scraped off; the membranes were fixed in methanol for 15 min and then stained with crystal violet for 30 min. The surface of the membrane was imaged in 5 distinct fields, with a Zeiss Axioplan II immunofluorescent microscope at 10×. Invasion and migration were assessed counting the average imaged cells in the 5 regions. Results presented are from three independent experiments.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!