The largest database of trusted experimental protocols

Myoview

Manufactured by Danish Myo Technology

Myoview is a diagnostic device developed by Danish Myo Technology for the assessment of muscle function. The core function of Myoview is to measure and analyze muscle activity through electromyography (EMG) technology.

Automatically generated - may contain errors

3 protocols using myoview

1

Aortic and Carotid Artery Mechanical Properties

Check if the same lab product or an alternative is used in the 5 most similar protocols
Ascending aortas and left carotid arteries (from transverse aorta to 6 mm up the common carotid) were dissected from euthanized WT and Cd36−/− mice as previously described (22 (link), 23 (link)). Briefly, vessels mounted in physiological saline on a pressure arteriograph (Danish Myotechnology, Copenhagen), were pressurized and longitudinally stretched to in vivo length three times before data capture. Vessel diameter recordings used a transillumination microscope connected to a camera and a computerized measurement system (Myoview, Danish Myotechnology). Intravascular pressure was increased from 0 to 175 mmHg in 25-mmHg steps and the vessel’s outer diameter (OD) was measured at each step.
+ Open protocol
+ Expand
2

Aortic and Carotid Artery Distensibility

Check if the same lab product or an alternative is used in the 5 most similar protocols
Ascending aortas (from the root to just distal to the innominate branch point) and left carotid arteries (from the transverse aorta to 6 mm up the common carotid) were dissected and mounted on a pressure arteriograph (Danish Myotechnology, Copenhagen, Denmark) in balanced physiological saline (130 mM NaCl, 4.7 mM KCl, 1.6 mM CaCl2, 1.18 mM MgSO4·7H2O, 1.17 mM KH2PO4, 14.8 mM NaHCO3, 5.5 mM dextrose, and 0.026 mM EDTA, pH 7.4) at 37 °C. Vessels were transilluminated under a microscope connected to a charge-coupled device camera and computerized measurement system (Myoview, Danish Myotechnology) to allow continuous recording of vessel diameters. Prior to data capture vessels were pressurized and stretched to in vivo length (Wagenseil et al., 2005 (link)). Intravascular pressure was increased from 0 to 175 mmHg in 25 mmHg steps. At each step, the outer diameter (OD) of the vessel was measured and manually recorded. Segmental distensibility was calculated from the pressure diameter curves as follows: distensibility (SD25) over a 25 mmHg interval = [ODHigher Pressure (H) − ODLower Pressure(L)]/OD(L)/25 (Knutsen et al., 2018 (link)).
+ Open protocol
+ Expand
3

Pressure Arteriography of Left Pulmonary Artery

Check if the same lab product or an alternative is used in the 5 most similar protocols
The left pulmonary artery (LPA), from the pulmonary trunk to just proximal to the first bifurcation, was excised post-euthanasia. Vessels were mounted on a pressure arteriograph (Danish Myotechnology, Copenhagen, Denmark) in balanced physiologic saline at 37°C, pressurized, and longitudinally stretched three times to in vivo length prior to data capture. Vessels were then transilluminated under a microscope connected to a charge-coupled device camera and computerized measurement system (Myoview, Danish Myotechnology) to allow for continuous recording of vessel diameters (further details on the pressure arteriography procedure can be found in (8 (link)). Intravascular pressure was increased from 0 to 70 mmHg in 10-mmHg steps. At each step, the outer diameter of the vessel was measured and manually recorded.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!