The largest database of trusted experimental protocols

Au480 clinical chemistry analyzer

Manufactured by Beckman Coulter
Sourced in United States

The AU480 Clinical Chemistry Analyzer is a fully automated, high-throughput instrument designed for clinical chemistry testing. It utilizes photometric and potentiometric detection methods to analyze a wide range of clinical chemistry parameters from various sample types. The AU480 is capable of performing routine and specialized clinical chemistry tests to support the diagnostic needs of medical laboratories.

Automatically generated - may contain errors

20 protocols using au480 clinical chemistry analyzer

1

NEFA Measurement from Frozen Plasma

Check if the same lab product or an alternative is used in the 5 most similar protocols
Frozen EDTA-plasma aliquots were thawed in a fridge at 2–4 °C for 1–2 h. Subsequently, samples were shortly vortexed, centrifuged (5,000× g, 10 min, 8 °C, Biofuge Fresco, Heraeus) and analyzed within one hour. NEFA measurements were performed using an AU480 clinical chemistry analyzer (Beckman–Coulter) with the NEFA HR reagent kit (Wako Diagnostics) with corresponding calibrator and controls.
+ Open protocol
+ Expand
2

Neonatal Piglet Metabolic Profiling

Check if the same lab product or an alternative is used in the 5 most similar protocols
For clinical-chemical analysis, frozen plasma samples derived from non-fasted 3-day-old piglets were thawed for 1 h at room temperature, mixed thoroughly and then centrifuged (10 min, 5000×g at 8 °C) and afterwards analyzed immediately using an AU480 clinical chemistry analyzer (Beckman Coulter) and adapted reagent kits from Beckman Coulter, Randox (Glycerol) or FUJIFILM Wako Chemicals Gmbh (NEFA) as described previously [38 ]. Insulin concentration was determined with ultrasensitive insulin ELISA from EDTA plasma (#10-1132-01, Mercodia) collected from newborn piglets before first milk intake. The homeostatic model assessment for insulin resistance index (HOMA-IR) [39 (link)] for estimating insulin resistance at fasting conditions was calculated using the formula: HOMA-IR = fasting plasma insulin (μU/mL) × fasting plasma glucose (mg/dL)/405. The ‘QUantitative Insulin sensitivity ChecK’ (QUICKI) index [40 (link)] was calculated with the formula: QUICKI = 1/[log(insulin (mU/L)) + log(glucose (mg/dL))].
+ Open protocol
+ Expand
3

Analyzing Serum Biomarkers in Anesthetized Barramundi

Check if the same lab product or an alternative is used in the 5 most similar protocols
Blood collection protocols from three fish/tank were described in our earlier study (1 (link)). Following blood collection using from anesthetized barramundi (8 mg/L of AQUI-S®) by puncturing the caudal vein, blood was allowed to clot for 4 h on ice and then centrifuged to separate the serum. The collected sera were preserved at −80°C for further analysis. Creatine kinase (CK; OSR6179) calcium (OSR60117), Mg (OSR6189), inorganic phos (OSR6122), iron (OSR6186), gamma-glutamyltransferase (GGT; OSR6020), and albumin (catalog code OSR6102) were run on a AU480 Clinical Chemistry Analyzer (Beckman Coulter Australia Pty Ltd., Lane Cove West, NSW) using Beckman Coulter clinical chemistry kits. A phase haptoglobin assay kit was used to analyze serum haptoglobin following the manufacturer’s instructions (Tridelta Development Ltd., Co. Wicklow, Ireland).
+ Open protocol
+ Expand
4

Liver and Metabolic Biomarkers Assay

Check if the same lab product or an alternative is used in the 5 most similar protocols
Plasma albumin, bilirubin, blood urea nitrogen, creatinine, alanine aminotransferase (ALT), and aspartate aminotransferase (AST) were measured using an AU480 Clinical Chemistry Analyzer (Beckman Coulter, Providence, RI). Basal blood glucose and plasma insulin were assessed using an Accu‐Chek glucometer (Roche Diagnostics, Basel, Switzerland) and the Ultrasensitive Mouse Insulin Enzyme‐Linked Immunosorbent Assay kit (Crystal Chem, Downers Grove, IL), respectively. Plasma levels of TAG and cholesterol were measured using the Infinity TAG and the Infinity Cholesterol kits, respectively (Thermo Fisher Scientific, Waltham, MA), with Multiconstituent Calibrator 1E65‐04 (Abbott, North Chicago, IL) used as reference. For hepatic TAG measurements, lipids were extracted from liver samples and analyzed using straight‐phase high‐performance liquid chromatography as described.21 Hepatic collagen deposition was assessed in liver homogenates using the Hydroxyproline Colorimetric Assay kit (Sigma‐Aldrich, St. Louis, MO).
+ Open protocol
+ Expand
5

Plasma Chemistry Analysis via Cardiac Puncture

Check if the same lab product or an alternative is used in the 5 most similar protocols
Blood samples were collected by cardiac puncture at time of sacrifice. Plasma chemistry values were measured on the AU480 Clinical Chemistry Analyzer (Beckman Coulter).
+ Open protocol
+ Expand
6

Serum Lipid and Liver Enzyme Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Blood was collected at necropsy into Becton Dickinson Vacutainer serum separating tubes (ref # 367981) and serum prepared according to manufacturer’s directions. Samples of serum (10 μL) were analyzed for cholesterol (total cholesterol, triglycerides, LDL, and HDL), liver enzymes (ALP, ALT, and AST), and glucose using an AU480 clinical chemistry analyzer (Beckman Coulter Inc., Brea, CA, USA). Reagents and calibrators used to measure alkaline phosphatase (ALP), alanine aminotransferase (ALT), aspartate aminotransferase (AST), glucose (Glu), triglyceride (Trig), high density lipoprotein (HDL), and cholesterol (Chol), were purchased from Beckman Coulter Inc. (Melville, NY, USA). Reagents used to measure low density lipoprotein (LDL) were purchased from Diazyme Laboratories (Poway, CA, USA). Lipid panel measurements were conducted on serum samples collected at PND 22, Week 6, and Week 18. Liver enzymes were measured for Week 18 samples only.
+ Open protocol
+ Expand
7

Multiplex Plasma Biomarkers Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Plasma lipid and glucose levels were determined using an AU480 clinical chemistry analyzer (Beckman–Coulter) and adapted reagents from Beckman–Coulter (glucose, cholesterol, triglycerides and lactate) evtl Wako-Chemicals (NEFA) and Randox (Glycerol) as previously described (82 (link)). We use a multiplex assay platform to measure the concentration of leptin, FGF21 and insulin in plasma samples. It is an electroluminescence-linked immunosorbent assay based on the Mesoscale Discovery technology (U-Plex, Mesoscale Diagnostics, Rockville, MD, USA). A 10 spot MSD plate is coated with anti-insulin, anti-FGF21 and anti-leptin antibodies (previously treated with the corresponding spot-linkers). Plasma samples are diluted 1:2 and incubated for 1 h. After that, the samples are incubated for 1 h with Sulfotag conjugated detection antibodies (second antibodies) before they are analyzed in the MSD plate reader. Coated and detection antibodies for leptin, FGF21 and insulin are provided as U-Plex antibodies from MSD. MSD discovery workbench is used as analysis software.
+ Open protocol
+ Expand
8

Plasma Biomarker Quantification Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Plasma was collected from every subject as previously described (Barbayianni, Ninou, et al. 2018). In brief, after euthanasia of the animals, the blood was collected through the inferior vena cava, and EDTA was added to a final concentration of 10%. The samples were then centrifuged for 20 min at 2000 g at 4 °C. Plasma was transferred and stored at 4 °C until biochemical analysis was performed using a Beckman Coulter AU480 Clinical Chemistry Analyzer based at the BSRC ‘Alexander Fleming’ phenotyping facility for the estimation of Alanine Transaminase (ALT) (OSR6107, Beckman Coulter, Brea, CA, USA) and Aspartate Transaminase (AST) (OSR6109, Beckman Coulter, Brea, CA, USA) levels.
+ Open protocol
+ Expand
9

Plasma and Urine Electrolyte Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Plasma and urine electrolytes (K+, Na+, Cl) were measured at the Animal Phenotyping Facility at Max-Delbrück-Centrum (MDC) Berlin using an AU480 Clinical Chemistry Analyzer (Beckman Coulter).
+ Open protocol
+ Expand
10

Plasma Chemistry Analysis via Cardiac Puncture

Check if the same lab product or an alternative is used in the 5 most similar protocols
Blood samples were collected by cardiac puncture at time of sacrifice. Plasma chemistry values were measured on the AU480 Clinical Chemistry Analyzer (Beckman Coulter).
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!