The largest database of trusted experimental protocols

Magnetom prisma system

Manufactured by Siemens
Sourced in Germany

The MAGNETOM Prisma system is a magnetic resonance imaging (MRI) scanner developed by Siemens. It is designed to provide high-quality imaging capabilities for medical and research applications. The MAGNETOM Prisma system utilizes a powerful superconducting magnet and advanced imaging technology to generate detailed images of the human body.

Automatically generated - may contain errors

Lab products found in correlation

10 protocols using magnetom prisma system

1

Multimodal MRI Acquisition Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
The MRI scans were acquired on a 3 T Siemens Magnetom Prisma system (Siemens, Erlangen, Germany) equipped with a 64-channel head/neck coil at Scannexus, Maastricht, The Netherlands. T1-weighted Magnetization Prepared Rapid Acquisition Gradient Echo (MPRAGE) whole brain images were acquired with a voxel size of 1.0 mm × 1.0 mm × 1.0 mm (repetition time (TR) = 2250 msec, echo time (TE) = 2.21 msec, flip angle = 9°, field of view (FOV) = 256 × 256, 192 sagittal orientated slices, GRAPPA = 2, no fat suppression, acquisition time (TA) = 5.05 min).
Whole brain structural Diffusion Weighted Imaging scans were acquired using an interleaved echo-planar-imaging sequence (field of view 200 × 200 mm2, TR 7300 ms, TE 49 ms, voxel size 2 × 2 × 2 mm3, b-value 1000 s/mm2, 72 slices, no overlap). 119 directions were recorded; 11 B0 volumes and 108 B-1000 volumes. Total acquisition time was 14m52s. Due to a scanner update a one scan (PE-group) was recorded with TR 7800 ms.
+ Open protocol
+ Expand
2

Longitudinal Structural Brain Imaging After Trauma

Check if the same lab product or an alternative is used in the 5 most similar protocols
Whole-brain anatomical images were conducted using a 3T MAGNETOM Prisma system (Siemens Medical Solutions, Erlangen, Germany) at the Tel-Aviv Sourasky Medical Center (TASMC). These repeated structural MRI scans took place at three different time points following traumatic exposure (T1, T2, and T3). At each time point, a sagittal T1-weighted magnetization prepared rapid gradient echo (MPRAGE) sequence (TR/TE = 2400/2.29ms, flip angle = 8°, voxel size = 0.7mm3, field of view = 224×224mm2, slice thickness=0.7mm) was used to acquire high-resolution structural images. Foam padding and earplugs were used to reduce head motion and scanner noise.
+ Open protocol
+ Expand
3

5D J-resolved MRSI Phantom Imaging

Check if the same lab product or an alternative is used in the 5 most similar protocols
The spectroscopic phantom was scanned on a 3T Siemens Magnetom Prisma system using a commercial 20-channel head and neck coil. The data were acquired using the proposed data acquisition scheme with the following parameters: FOV = 180 × 180 × 48 mm3, excitation volume = 90 × 90 × 40 mm3, TR = 1200 ms, nominal spatial resolution = 3.0 × 3.0 × 3.0 mm3, matrix size = 60 × 60 × 16, and 30.7 minutes scan time. The proposed method was used to reconstruct the 5D J-resolved MRSI images for spectral quantification. The metabolite concentrations of vial I were used as reference for calculating the molecule concentrations in all the other vials.
+ Open protocol
+ Expand
4

Rat Brain Imaging with 3T MRI

Check if the same lab product or an alternative is used in the 5 most similar protocols
All rats underwent fasting for 12 h and water deprivation for 4 h before scanning. After anesthetized with 3% isoflurane and maintained with 1.5% isoflurane, the rats were placed in the supine position with all 4 limbs immobilized. A Siemens Prisma 3.0 T superconducting scanner with a 64-channel head-coil system (MAGNETOM Prisma System, Siemens Medical Solutions, Erlangen, Germany) was used.
+ Open protocol
+ Expand
5

Comprehensive Neuroimaging Protocol for Brain Assessment

Check if the same lab product or an alternative is used in the 5 most similar protocols
All participants underwent a comprehensive neuroimaging protocol (Nation et al., 2018 (link)) and all MRI scans were conducted on a 3T scanner (Siemens MAGNETOM Prisma System). The following sequences were examined for the current analysis: 3D T1-weighted anatomical scan for qualitative assessment of brain structures and abnormalities (Scan parameters: TR = 2300 ms; TE = 2.98 ms; TI = 900 ms; flip angle = 9 deg; FOV = 256 mm; resolution = 1.0 × 1.0 × 1.2 mm3; Scan time = 9 minutes), T2-weighted scan for identification of perivascular spaces (Scan parameters: TR = 10000 ms; TE = 88.0 ms; flip angle = 120 deg; FOV = 210 mm; resolution = 0.8 × 0.8 × 3.5 mm3; Echo spacing = 9.8 ms; Echo trains per slice = 11; Scan time = 2 minutes), and 3D gradient and spin-echo (GRASE) pseudo-continuous arterial spin labeling (pCASL) for CBF. The scan parameters were as follows for pCASL: TR = 5000 ms; TE at University of Southern California = 36.3 ms; TE at University of California, Irvine = 37.46 ms; FOV = 240 mm; resolution = 2.5 × 2.5 × 3.4 mm3; slice thickness = 3.42 mm; number of slices = 24; labeling duration = 1517 ms; post-labeling delay = 2000 ms. There was a total of 32 acquisitions (1 M0 image + 1 dummy image + 30 alternating tag and control images), with a total scan time of 5 minutes 25 seconds, yielding 15 tag-control pair images.
+ Open protocol
+ Expand
6

Large-Scale fMRI Scanning Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
fMRI data were acquired with a 3-Tesla Siemens MAGNETOM Prisma system (Siemens Medical Systems, Erlangen, Germany). The scanner was equipped with a 64-channel phased-array head/neck coil. We used inflatable air pads to restrict head movement, and participants were instructed to lie still for the duration of the scan. For the applicability in large-scale testing, we decided on a standard fMRI scanning protocol: we acquired two task fMRI sessions of 140 volumes using echo-planar imaging (EPI), including four dummies. Each volume consisted of 32 axial slices of 3-mm thickness with a 0.75-mm gap. The repetition time (TR) was 2,000 ms, echo time (TE) was 30 ms, flip angle was 84°, readout bandwidth was 2,300 Hz/pixel, the slice orientation was anterior commissure–posterior commissure (AC-PC), and field of view (FOV) was 192 × 192 mm, resulting in an effective voxel size of 3.0 × 3.0 × 3.75 mm.
+ Open protocol
+ Expand
7

High-Resolution 3T MEMPR Neuroimaging

Check if the same lab product or an alternative is used in the 5 most similar protocols
Neuroimaging was acquired on a 3T Siemens MAGNETOM Prisma system with a 32-channel head coil. For optimal contrast, a multi-echo MPRAGE (MEMPR) sequence was collected with the following parameters: TR/TE/TI=2400/2.07/1000 ms, flip angle=8°, FoV=256×256 mm, Slice thickness=0.8 mm, Slices per slab=224, 3D voxel resolution=0.8×0.8×0.8 mm, Pixel bandwidth=240 Hz. A fieldmap for distortion correction was also acquired: TR/TE=7220 ms/73 ms, FoV=248×248 mm, in-plane voxel resolution=3.0×3.0×3.0 mm, 56 slices.
+ Open protocol
+ Expand
8

Multimodal MRI Acquisition Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
The MRI acquisition was performed using the 3T Siemens MAGNETOM Prisma system (Siemens, Erlangen, Germany). T1w images were acquired using the magnetization-prepared rapid gradient-echo (MPRAGE) sequence, with voxel size = 1 × 1 × 1 mm3, repetition time = 2,150 ms, echo time (TE) = 2.47 ms, inversion time = 1,000 ms, generalized autocalibrating partial parallel acquisition = 2, and flip angle = 8°. The acquisition of T2w images was based on the SPACE sequence, with voxel size = 1 × 1 × 1 mm3, TE = 147 ms, and generalized autocalibrating partial parallel acquisition = 2. No prescan normalization algorithm as implemented by the manufacturer was used in T1w or T2w scans. Finally, the pseudocontinuous arterial spin labeling sequence was acquired with a repetition time = 5,000 ms, TE = 14 ms, field of view = 210 × 210 mm2, voxel size = 3 × 3 × 3 mm3, number of slices = 36 with 20% gap, labeling plane thickness = 10 mm, labeling plane offset = 90 mm, labeling duration = 1,600 ms, labeling postlabeling delay = 1,600 ms, and number of pairs of label/control images = 80 (in 10 subjects, the number of label/control pairs was 79). The metabolic condition during the MRI acquisition was controlled using a hyperinsulinemic clamp to maintain blood glucose level of ∼95 mg/dL (for details of the procedure, see Mangia et al. [29 (link)]).
+ Open protocol
+ Expand
9

Quantifying Liver Fat Changes with Liraglutide

Check if the same lab product or an alternative is used in the 5 most similar protocols
All subjects received upper-abdominal MRI examinations to accurately measure liver fat content before and after the 12-week liraglutide treatment. Each subject underwent an upper-abdominal MRI examination with a 3-Tesla whole-body human MRI scanner (MAGNETOM Prisma System; Siemens Medical Solutions, Erlangen, Germany) while in the supine position. Subjects were instructed to follow a 10 to 12 h overnight fast before imaging. The scanning protocol comprised an initial set of localizer images and then a T1 volumetric interpolated breath-hold examination (VIBE) Dixon sequence. The scans covered all upper abdominal organs, including liver and pancreas. The imaging parameters were as follows: TE1 1.23 ms, TE2 2.46 ms, TR 3.97 ms, 9° flip angle, Bandwidth1 1040 Hz/Px, Bandwidth2 1040 Hz/Px, and a slice thickness of 3.0 mm. All subjects were carefully instructed to hold their breath during end expiration to ensure consistency.
+ Open protocol
+ Expand
10

Prisma MRI Acquisition Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
MRI data were acquired using the 3-T Siemens MAGNETOM Prisma system from the Beijing Tiantan Hospital and First Affiliated Hospital Affiliated with Xiamen University. Details of the MRI acquisition parameters are shown in Appendix S2.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!