The largest database of trusted experimental protocols

22 protocols using mab8929

1

Quantitative Capillary Western Blotting

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cells were lysed on ice using RIPA buffer (Thermo Fisher Scientific, Cat# 89901). The lysates were analyzed using the 12–230 kDa Wes separation module of the quantitative capillary Western immunoassay system (ProteinSimple). Anti-rabbit or anti-mouse detection module and anti-goat secondary antibodies were used for Wes per the manufacturer’s recommendation (ProteinSimple). Primary antibodies used were as follows: LRP1 (1:25, Cell Signaling Technology, Cat# 64099S), SMAD4 (1:10, R&D Systems, Cat# AF2097), and β-actin (1:200, R&D Systems, Cat# MAB8929) as a housekeeping control. Data were analyzed and displayed in Compass for SW (Version: 3.1.7).
+ Open protocol
+ Expand
2

Protein Expression Analysis of HO-1 and NQO-1

Check if the same lab product or an alternative is used in the 5 most similar protocols
Total cellular protein extracts were obtained by way of cell lysis. Twenty micrograms of protein underwent electrophoresis, and immunoblotting was performed with mouse monoclonal anti-human HO-1/HMOX1 (1:1000, Santa Cruz Biotechnology, Dallas, TX, USA, sc-136960), mouse monoclonal anti-human NQO-1 (1:1000, Novus Biologicals, Littleton, CO, USA, NB200-209) and mouse monoclonal anti-human β-actin (1:50,000, R&D Systems Inc., Minneapolis, MN, USA, MAB8929).
+ Open protocol
+ Expand
3

Western Blot Analysis of Key Signaling Proteins

Check if the same lab product or an alternative is used in the 5 most similar protocols
Western Blot assay was performed using the SDS-PAGE Electrophoresis System as described previously (Li et al., 2014 (link)) with monoclonal antibodies specific for β-Actin (MAB8929, R&D Systems), VEGF (ab46154, Abcam), AKT (9272S, Cell Signaling Technology), phospho-AKT (13038, Cell Signaling Technology), Erk1/2 (4695, Cell Signaling Technology), phospho-Erk1/2 (9101, Cell Signaling Technology), caspase 3 (9662, Cell Signaling Technology) and cleaved caspase 3 (9579, Cell Signaling Technology). Anti-β-Actin antibody was diluted at the concentration of 1:50000 for use. The other antibodies were diluted at 1:2000 as a working concentration.
+ Open protocol
+ Expand
4

Western Blot Analysis of TSPO, Galectin 3, and Actin

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cells were lysed with RIPA buffer, and 25 μg of protein per lane were separated by 15% SDS-PAGE. Transfer, hybridization, and visualization were made as previously reported [25 (link)]. The primary antibodies were goat polyclonal anti-TSPO (1:1000, abcam, Cambridge, UK, ab92291); rabbit monoclonal anti-galectin 3 (1:1000, abcam, Cambridge, UK, ab76245), and mouse monoclonal anti-actin (1:1000, R&D systems, Minneapolis, MN, USA, MAB8929). The secondary antibodies were anti-goat (Zymed, Waltham, MA, USA, 61-1620), anti-rabbit (Invitrogen, Waltham, MA, USA, G21234), and anti-mouse (Jackson ImmunoResearch, West Grove, PA, USA, 115-035-003).
+ Open protocol
+ Expand
5

Western Blot Analysis of Nrf2 and HO-1

Check if the same lab product or an alternative is used in the 5 most similar protocols
Protein blotting analyses were performed as previously demonstrated (Yin et al., 2019 (link)). The employed antibodies included mouse antibody to Nrf2 (MAB3925, 1:500; R & D System), HO-1 (sc-390991, 1:750; Santa Cruz Biotechnology, Santa Cruz, CA, United States), β-actin (MAB8929, 1:500; R & D System), and goat anti-mouse IgG (sc-2039, 1:5000; Santa Cruz Biotechnology, Santa Cruz, CA, United States). The proteins were visualized using an enhanced chemiluminescence detection kit (Bio-Rad, Hercules, CA, United States) following the manufacturer’s protocol. Images were analyzed using the Kodak Image Station 2000R (Eastman Kodak Company, Rochester, NY, United States). Protein bands intensity were referenced to β-actin, and the data expressed as percentage difference relative to controls.
+ Open protocol
+ Expand
6

Nrf2 and HO-1 Protein Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Protein extraction and blotting analyses were carried out as previously reported [35 (link)]. The utilized antibodies included mouse antibody to Nrf2 (MAB3925, 1:500; R&D System), HO-1 (sc-390991, 1:750; Santa Cruz Biotechnology, Santa Cruz, CA, USA), β-actin (MAB8929, 1:500; R&D System), and goat anti-mouse IgG (sc-2039, 1:5000; Santa Cruz Biotechnology, Santa Cruz, CA, USA). The proteins were visualized using an enhanced chemiluminescence detection kit (Bio-Rad, Hercules, CA, USA) following the manufacturer’s protocol. Images were analyzed using the Kodak Image Station 2000R (Eastman Kodak Company, Rochester, NY, USA). Protein bands intensity were referenced to β-actin, and the data presented in terms of percent relative to controls.
+ Open protocol
+ Expand
7

Western Blot Analysis of Apoptosis-Related Proteins

Check if the same lab product or an alternative is used in the 5 most similar protocols
Mouse monoclonal antibody raised against Bcl-2 (#15071) and rabbit monoclonal antibody against Bcl-xL (#2764) were obtained from Cell Signaling Technology (Danvers, MA). Rabbit polyclonal antibody against the D2 receptor (MBS612859) was purchased from MyBioSource (San Diego, CA) and rabbit polyclonal antibody against the B2 receptor (NBP2-14351) from Novus Biologicals (Littleton, CO). Mouse monoclonal antibodies against β-actin (MAB8929) and Bax (MAB846) as well as goat polyclonal antibody against mouse or rabbit IgG conjugated with horseradish peroxidase (HAF007 or HAF008, respectively) were supplied by R&D Systems (Minneapolis, MN). Mouse monoclonal antibody against endothelial nitric oxide synthase (NOS3) (sc-376751) and against phospho-NOS3 (pNOS3) (sc-293032) were purchased from Santa Cruz Biotechnology (Dallas, TX). Goat polyclonal antibody against rabbit IgG conjugated with Alexa-Fluor488 (A11008) was obtained from Thermo Fisher Scientific.
+ Open protocol
+ Expand
8

Western Blot Analysis of Hippo Pathway

Check if the same lab product or an alternative is used in the 5 most similar protocols
Total protein from A498 and 786O cells was extracted using RIPA Lysing Buffer (Beyotime). Protein was separated by electrophoresis in 12% SDS-PAGE and transferred to PVDF membranes, blocked with 5% milk in Tris-buffered saline with Tween 20, and probed with the primary antibodies against YAP1 (ab52771), LATS1 (ab70562), LATS2 (ab110780), TEAD2 (ab92279), TEAD3 (ab75192) and β-actin antibody (MAB8929, 1:1000; R&D systems). After incubation with peroxidase-conjugated secondary antibodies, bands were visualized with enhanced chemiluminescence (Millipore). The relative band intensities were quantified using a ChemiDoc XRS imaging system.
+ Open protocol
+ Expand
9

Western Blot Analysis of SARS-CoV-2 Spike Protein

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cells in 12-well plates were lysed by 125 μl of radioimmunoprecipitation assay buffer (89901, Thermo Fisher Scientific) with protease inhibitor (4693159001, Roche, Basel, Switzerland) at 24 hours after transfection. Proteins were separated by SDS–polyacrylamide gel electrophoresis gel and transferred to polyvinylidene difluoride or nitrocellulose membrane. Specific primary antibodies were incubated with the blocked membranes at 4°C overnight, followed by horseradish peroxidase (HRP)–conjugated secondary antibodies (Thermo Fisher Scientific) incubation for 2 hours at room temperature. The signal was developed by the Immobilon Crescendo Western HRP Substrate (WBLUR0500, Merck Millipore, MA, USA) and detected using the Alliance Imager apparatus (Uvitec, Cambridge, UK). Mouse anti-flag antibody (F1804, Sigma-Aldrich, St. Louis, Missouri, USA) was used as the primary antibody to detect the overexpression of the flag-tagged proteases. Human ACE2 was detected with a rabbit anti-V5 antibody (CM3005, ImmunoWay, Plano, TX, USA). β-Actin was used as the loading control, which was detected by a mouse anti-human β-actin antibody (MAB8929, R&D Systems, Minneapolis, Minnesota, USA). The spike protein was detected with a rabbit anti–SARS-CoV-2 spike S2 antibody (40590-T62, Sino Biological, Beijing, China).
+ Open protocol
+ Expand
10

Protein Blot Analysis of Cellular Stress Markers

Check if the same lab product or an alternative is used in the 5 most similar protocols
For protein blot analyses, cells were grown to full confluence, washed twice with 1X PBS, immediately scraped off the plate into a microcentrifuge tube with 1X Laemmli sample buffer for CISD2 and mNT antibodies, and heated to 95°C for 10 minutes. For GPX4, TfR, TXNIP and TRX2, RIPA (Radioimmunoprecipitation assay; Sigma-Aldrich) buffer was used and lysates were kept on ice for 2 hours with vortex every 30 minutes, then centrifugation at 15,000 rpm for 15 minutes, supernatant was used for protein denaturation with Laemmli sample buffer 5X. Protein gels were loaded with equal amounts of protein, determined using The Pierce 660 nm Protein Assay (Thermo Scientific™, Cat. No. 22662) [11 (link)], and analyzed using antibodies against CISD2 and mitoNEET [23 , 33 (link)], TXNIP (Novus Biologicals, NBP2–27095), Thioredoxin 2 (Novus Biologicals, NBP1–92499), β-actin (R&D Systems, MAB8929), GPX4 (R&D Systems, Cat. No. MAB5457), and TfR (Abcam, ab84036). Goat Anti-Rabbit IgG, H & L Chain Specific Peroxidase Conjugate (Sigma, 401315) and Peroxidase-conjugated AffiniPure Goat anti-mouse IgG (H+L) (Jackson ImmunoResearch Laboratories, AB_10015289) were used as secondary antibodies (7, 24). All experiments were repeated at least 3 times.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!