The largest database of trusted experimental protocols

Ms hplc system

Manufactured by Thermo Fisher Scientific
Sourced in Germany

The MS HPLC system is a high-performance liquid chromatography (HPLC) instrument coupled with a mass spectrometer (MS) for analytical applications. The system separates and detects chemical compounds within a sample, providing detailed information about their molecular composition.

Automatically generated - may contain errors

5 protocols using ms hplc system

1

Beetroot Extract Compound Identification

Check if the same lab product or an alternative is used in the 5 most similar protocols
For the identification of the compounds in the beetroot extract, a Thermo HPLC-MS system was used, equipped with a Diode Array and MSQ Plus detector, an Acclaim 120 C18 column (150 mm × 4.6 µm), acetonitrile (5–95%), and formic acid 0.1% (95–5%), with a flow rate of 0.4 mL/min as mobile phase and 10 µL injection volume. The MSQ Plus functioned in ESI mode (positive ion mode), with 250 °C probe temperature, and +75 V (cone). The UV absorptions were recorded at 4 wavelengths: 310 nm, 480 nm, 505 nm, and 541 nm.
+ Open protocol
+ Expand
2

HPLC-MS Analysis of Bioactive Fractions

Check if the same lab product or an alternative is used in the 5 most similar protocols
EtOAc and BuOH fractions were analysed by HPLC-MS system (Thermo Fisher Scientific, Germany) with an LPG3400RS pump, pressure 290 -15000 psi; automatic injection WPS3000TRS; Electrospray ionization, Ion Trap LCQ FLEET (Thermo Fisher Scientific, Germany). Column Ascentis Express C18 (2.7 µm, 10 cm x 4.6 mm, Waters) was maintained at 25 °C. The eluents were H2O adjusted 0,01 % H3PO4 (A) and methanol (MeOH, B). The mobile phase (v/v) was used in gradient mode: 0-5 min, A-B
+ Open protocol
+ Expand
3

Liquid Chromatography-Tandem Mass Spectrometry

Check if the same lab product or an alternative is used in the 5 most similar protocols
The digested samples were analyzed using a Thermo-Finnigan linear ion-trap (LTQ) mass spectrometer coupled with a Surveyor autosampler and MS HPLC system (Thermo-Finnigan). Tryptic peptides were injected onto the C18 microbore RP column (Zorbax SB-C18, 1.0 mm x 150 mm) at a flow rate of 50 μL/min. The mobile phases A, B, and C were 0.1% formic acid in water, 50% ACN with 0.1% formic acid in water, and 80% ACN with 0.1% formic acid in water, respectively. The gradient elution profile was as follows: 10% B (90% A) for 5 min, 10-95% B (90-5% A) for 120 min, 100% C for 5 min, and 10% B (90% A) for 12 min. The data were collected in the “Triple-Play” (MS scan, Zoom scan, and MS/MS scan) mode with the ESI interface using normalized collision energy of 35%. Dynamic exclusion settings were set to repeat count 1, repeat duration 30 s, exclusion duration 120 s, and exclusion mass width 0.75 m/z (low) and 2.0 m/z (high). Each sample was injected twice.
+ Open protocol
+ Expand
4

HK-2 Cell Proteome Profiling by LFQMS

Check if the same lab product or an alternative is used in the 5 most similar protocols
Triplicate protein extracts from HK-2 cells, treated with THP or vehicle, were analyzed using LFQMS as previously described (18 (link), 19 (link)). In brief, HK-2 proteins were digested with trypsin and peptides analyzed using a Thermo-Finnigan linear ion-trap (LTQ) mass spectrometer coupled with a Surveyor autosampler and MS HPLC system (Thermo-Finnigan). The data were collected in the “Data dependent MS/MS” mode with the ESI interface and searched against the International Protein Index (IPI) HUMAN database using SEQUEST (v. 28 rev. 12) algorithms in Bioworks (v. 3.3). The searched peptides and proteins were validated by PeptideProphet (64 (link)) and ProteinProphet (65 (link)) in the Trans-Proteomic Pipeline (TPP, v. 3.3.0) (http://tools.proteomecenter.org/software.php). Only proteins with probability ≥ 0.9000 and peptides with probability ≥ 0.8000 were used for quantitation.
+ Open protocol
+ Expand
5

Quantitative Proteomics of KCNQ1/KCNE1 Channels

Check if the same lab product or an alternative is used in the 5 most similar protocols
HEK293 cells expressing hKCNQ1 / hKCNE1 were incubated with ISO 100 nM. Cells were lysed and enriched membrane preparations (100 μg) were reduced, alkylated and digested with trypsin.16 (link) Digested samples were analyzed using a Thermo-Finnigan linear ion-trap (LTQ) mass spectrometer coupled with a Surveyor autosampler and MS HPLC system (ThermoFinnigan®). The complete LCMS/MS methods have been previously described in detail.16 (link) Only proteins and peptides with protein probability ≥ 0.9000 and peptide probability ≥ 0.8000 are reported. Protein quantification was performed using a label-free quantification software package, IdentiQuantXL.17 (link)
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!