The largest database of trusted experimental protocols

400 ft nmr spectrometer

Manufactured by Agilent Technologies

The Agilent -400 FT-NMR spectrometer is a laboratory instrument designed for nuclear magnetic resonance (NMR) spectroscopy. It is used to analyze the structure and composition of chemical samples by detecting the magnetic properties of atomic nuclei within the sample.

Automatically generated - may contain errors

10 protocols using 400 ft nmr spectrometer

1

Polymer Characterization by NMR and GPC

Check if the same lab product or an alternative is used in the 5 most similar protocols
1H NMR spectrum was examined on a Varian-400 FT-NMR spectrometer at 400.0 MHz with d6-DMSO as the solvent. Molecular weight (Mn and Mw) and distribution (Mw/Mn) of the synthesized polymers were measured by gel permeation chromatography (GPC) performed on a Waters 515 HPLC pump and a Waters 717 Plus Autosampler equipped with a Waters 2414 refractive index detector. Tetrahydrofuran (THF) was used as the eluent with a flowing rate of 1.0 mL/min at 35°C. A series of commercial polystyrene standards with narrow molecular weight distribution were applied to calibrate the GPC elution traces.
+ Open protocol
+ Expand
2

Synthesis of PMet-P(cdmPEG2K) Polymer

Check if the same lab product or an alternative is used in the 5 most similar protocols
PMet-P(cdmPEG2K) was synthesized by a ring opening reaction of PEG2K-cdm and pMet polymers. Boc-deprotected PMet (compound 5, 100 mg) and PEG2K-cdm (compound 1, 303 mg) were dissolved in 4 mL of DMSO and stirred at 37 °C for 24 h. The mixture was dialyzed against DMSO and then distilled water for 2 days. The final product of PMet-P(cdmPEG2K) polymer was then lyophilized.
1H NMR spectrum was analyzed on a Varian-400 FT-NMR spectrometer at 400 MHz with DMSO-d6 and CDCl3 as the solvent.
+ Open protocol
+ Expand
3

1H NMR and GPC Characterization of Polymers

Check if the same lab product or an alternative is used in the 5 most similar protocols
1H NMR spectrum was conducted on a Varian 400 FT-NMR spectrometer at 400.0 MHz with CDCl3 as the solvent. Molecular weight (Mn and Mw) and polydispersity index (Mw/Mn) of the synthesized polymers were measured by gel permeation chromatography (GPC) equipped with a Waters 2414 refractive index detector, a Waters 515 HPLC pump and a Waters 717 Plus Autosampler. THF was used as the eluent with a flowing rate of 1.0 mL/min at 35°C. A series of commercial polystyrene standards with narrow molecular weight distribution were applied to calibrate the GPC elution traces.
+ Open protocol
+ Expand
4

Characterization of Synthesized Polymers

Check if the same lab product or an alternative is used in the 5 most similar protocols
1H NMR spectrum was conducted on a Varian 400 FT-NMR spectrometer at 400.0 MHz with CDCl3 as the solvent. Molecular weight (Mn and Mw) and polydispersity index (Mw/Mn) of the synthesized polymers were determined by gel permeation chromatography (GPC) equipped with a Waters 2414 refractive index detector, a Waters 515 HPLC pump, and a Waters 717 Plus Autosampler. THF was used as the eluent with a flowing rate of 1.0 mL/min at 35°C. A series of polystyrene standards with narrow molecular weight distribution were used for calibration.
+ Open protocol
+ Expand
5

Characterization of Synthesized Polymers

Check if the same lab product or an alternative is used in the 5 most similar protocols
1H NMR spectrum (400.0 MHz) was recorded on a Varian 400 FT-NMR spectrometer with CDCI3 as the solvent. Molecular weights (Mn and Mw) and molecular weight distributions (Mw/Mn) of the synthesized polymers were determined by gel permeation chromatography (GPC) equipped with a Waters 2414 refractive index detector. THF was used as the eluent with a flowing rate of 1.0 mL/min at 35°C. A series of polystyrene standards with narrow molecular weight distribution were applied for calibration. HPLC and FPLC were performed on a Waters 1525 Binary HPLC pump (Milford, MA) with a Waters 2489 UV/visible detector and a model 106 Bioscan radioactivity detector for the analysis of either 64Cu or 89Zr labeled conjugates using either a two-components buffer (0.1 v% TFA in de-ionized water + 0.1 v% TFA in acetonitrile) or PBS as the eluting phase for HPLC and FPLC respectively. PET/CT data were acquired using an Inveon Preclinical Imaging Station (Siemens Medical Solutions).
+ Open protocol
+ Expand
6

Characterization of Polymer Micelles

Check if the same lab product or an alternative is used in the 5 most similar protocols
1H NMR spectroscopy was performed on a Varian-400 FT-NMR spectrometer (400.0 MHz) with CDCl3 and DMSO-d6 as the solvent. The molecular weight (Mn and Mw) and distribution (Mw/Mn) of the synthesized polymers were measured by gel permeation chromatography (GPC) with a Waters 2414 refractive index detector. A series of polystyrene standards with a narrow molecular weight distribution were applied to calibrate the GPC elution traces. Tetrahydrofuran (THF) was used as the eluent at a flow rate of 1.0 mL/min at 35 °C, and a series of commercial polystyrene standards were used for the calibration. The size distribution and morphology of blank and drug-loaded micelles were examined by dynamic light scattering (DLS, Malvern Zeta Nanosizer) and transmission electron microscopy (TEM, negative staining method), respectively.
+ Open protocol
+ Expand
7

Polymer Characterization by Advanced Techniques

Check if the same lab product or an alternative is used in the 5 most similar protocols
The structures of monomer and polymers were characterized by 1H NMR spectrum on a Varian 400 FT-NMR spectrometer (400.0 MHz). FTIR spectra were recorded on a Bio-Rad FTS-185 spectrometer at room temperature. The molecular weight (Mn and Mw) and polydispersity index (Mw/Mn) of polymers were determined by gel permeation chromatography (GPC) with a Waters 2414 refractive index detector. A series of commercial polystyrene standards were used for calibration curves. The average particle size, size distribution and morphology of micelles were measured by dynamic light scattering (DLS, Malvern Zeta Sizer) and transmission electron microscopy (TEM).
+ Open protocol
+ Expand
8

Polymer Micelle Characterization

Check if the same lab product or an alternative is used in the 5 most similar protocols
1H NMR spectra were examined on a Varian-400 FT-NMR spectrometer at 500 MHz by using D2O or DMSO-d6 as the solvent depending on polymer solubility. The size distribution and zeta potential of all micelles were investigated by dynamic light scattering (DLS) (Zs90; Malvern Instruments, Malvern, UK). The morphology was observed by transmission electronic microscopy (TEM) (Hitachi Ltd., Tokyo, Japan).
+ Open protocol
+ Expand
9

Polymer Characterization by NMR and GPC

Check if the same lab product or an alternative is used in the 5 most similar protocols
1H NMR spectrum was examined on a Varian-400 FT-NMR spectrometer at 400.0 MHz with CDCl3 and DMSO-d6 as the solvent. Molecular weight (Mn and Mw) and distribution (Mw/Mn) of the synthesized polymers were measured by gel permeation chromatography (GPC) performed on a Waters 515 HPLC pump and a Waters 717 Plus Autosampler equipped with a Waters 2414 refractive index detector. Tetrahydrofuran (THF) was used as the eluent with a flowing rate of 1.0 mL/min at 35°C. A series of commercial polystyrene standards with narrow molecular weight distribution were applied to calibrate the GPC elution traces.
+ Open protocol
+ Expand
10

Polymer Characterization via 1H-NMR

Check if the same lab product or an alternative is used in the 5 most similar protocols
1H-NMR spectrum of synthesized polymer was examined on a Varian-400 FT-NMR spectrometer at 400.0 MHz with DMSO-d6 as the solvent.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!