The largest database of trusted experimental protocols
Sourced in China

Acrylamide is a chemical compound commonly used in various laboratory applications. It serves as a basic building block for the synthesis of polyacrylamide gels, which are widely employed in gel electrophoresis techniques. The primary function of acrylamide is to facilitate the separation and analysis of biomolecules, such as proteins and nucleic acids, based on their size and charge characteristics.

Automatically generated - may contain errors

19 protocols using acrylamide

1

Synthesis of Nitrogenous Compounds

Check if the same lab product or an alternative is used in the 5 most similar protocols
5-Cyanovaleramide was bought
from Toronto Research Chemicals Inc., Canada. Malonamide and cyanoacetamide
were purchased from Shanghai Aladdin Bio-Chem Technology Co., Ltd.
Adiponitrile, adipamide, malononitrile, terephthalonitrile, 4-cyanobenzamide,
terephthalamide, 3-cyanopyridine, nicotinamide, acrylonitrile, acrylamide,
benzonitrile, and benzamide were obtained from Shanghai Macklin Biochemical
Co., Ltd. All the reagents are analytical grade or higher.
+ Open protocol
+ Expand
2

Polymer-based Photocrosslinkable Hydrogel Synthesis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Acrylamide (Am, 99.9%), acryloyl chloride (96%), choline chloride (ChCl, 99%), β-cyclodextrin (β-CD, 98%), dichloromethane (DCM, 99.9%, with molecular sieves, water ≤ 50 ppm), 4-dimethylaminopyridine (DMAP, 99%), N,N-dimethylformamide (DMF, 99.8%, with molecular sieves, water ≤ 50 ppm), 4-(4,6-dimethoxy−1,3,5-triazin-2-yl)-4-methylmorpholinium chloride (DMTMM, 97%), ethylene glycol (EG, 98%), poly(ethylene glycol) (PEG, average Mn = 2000), rhodamine B, and tartrazine (yellow dye) were purchased from Macklin. 2-Hydroxy-4′-(2-hydroxyethoxy)-2-methylpropiophenone (I2959, ≥98.0%), lithium phenyl(2,4,6-trimethylbenzoyl)phosphinate (LAP, ≥98.0%), lithocholic acid (LCA, >97.0%), N,N’-methylenebisAcrylamide (MBA), sodium bicarbonate (NaHCO3, ≥99.8%), and triethylamine (TEA, ≥99.5%) were purchased from Aladdin. Acetone, diethyl ether and hydrochloric acid (HCl) were purchased from Guangzhou Chemical Reagent Factory (Guangdong, China).
+ Open protocol
+ Expand
3

Anthraquinone-Based Metal Complexes Synthesis

Check if the same lab product or an alternative is used in the 5 most similar protocols
1,4-dihydroxyanthraquinone, CoCl2, NaCl, CuSO4, ZnCl2, MgCl2, HgCl2, Ni(NO3)2, MnCl2, NH4Cl, Al2(SO4)3, CoCl2, formamide, ethanol, dichloromethane (DCM), glyphosate (GP), trichlorfon, 1-naphthofen, carbaryl, carbendazim, polyvinyl alcohol (PVA), acrylamide, ammonium persulphateetc, and all of the reagents were purchased from Shanghai Macklin Biochemical Co., Ltd (http://www.macklin.cn/) and were used without further treatment.
+ Open protocol
+ Expand
4

Polymer Microsphere Fabrication Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Acrylamide (AM) was supplied by Macklin (Shanghai, China). Potassium persulfate, trichloromethane and isopropyl alcohol were purchased from Sinopharm Chemical Reagent (Shanghai, China). Potassium sucrose octasulfate was purchased from Avito (Shanghai, China). Polyvinyl alcohol (PVA), methyl methacrylate (MMA), Span-80, divinylbenzene (DVB) and all other chemicals were purchased from Aladdin (Shanghai, China). Cell counting kit 8 was purchased from Biosharp (Wuhan, China). Live/dead staining kits, sodium citrate buffer and streptozotocin were purchased from Solarbio (Beijing, China). The activated partial thromboplastin time assay kit and prothrombin time assay kit were purchased from Rayto (Shenzhen, China). The 5-ethynyl-2’-deoxyuridine (EdU) kit was provided by Beyotime (Shanghai, China). The MMP-9 protein reagent for the in vitro cell assay was purchased from Novoprotein (Suzhou, China). The transforming growth factor-β (TGF-β) antibody was provided by Boster (Wuhan, China). The vascular endothelial growth factor (VEGF) antibody and epidermal growth factor (EGF) antibody were purchased from ABclonal (Wuhan, China). The MMP-9 antibody was purchased from Proteintech (Wuhan, China). The platelet endothelial cell adhesion molecule-1 (CD31) antibody was provided by Abcam (Shanghai, China).
+ Open protocol
+ Expand
5

Synthesis of Seawater-Soluble Polymers

Check if the same lab product or an alternative is used in the 5 most similar protocols
Acrylamide (AM, 99%), acrylic(AA, 98%), N-vinyl pyrrolidone (NVP, 98%), 2-Acrylamide-2-methylpropanesulfonic acid (AMPS, industrial grade), pentaerythritol triallyl ether (PTE, 99%), cetyl dimethylallyl ammonium chloride (C16DMAAC, 80%), potassium formate (HCOOK, industrial grade), sodium hydroxide (NaOH, AR), sodium carbonate (Na2CO3, AR), potassium persulfate (KPS, AR), sodium bisulfite (NaHSO3, AR), all the above materials were purchased from Shanghai Macklin Biochemical Co. LTD, China and were used without any further purification. Seawater is prepared by artificial seawater as Table 1.

Artificial seawater formulation.

SubstancesConcentration (g/L)
NaCl21.86 ± 0.01
Na2SO43.23 ± 0.01
MgCl24.53 ± 0.01
CaCl20.93 ± 0.01
KCl0.64 ± 0.01
NaHCO30.17 ± 0.01
Na2CO30.02 ± 0.01
+ Open protocol
+ Expand
6

Synthesis of Hierarchical Polymer Electrolyte

Check if the same lab product or an alternative is used in the 5 most similar protocols
The hierarchical polymer electrolyte (HPE) was synthesized by in situ free radical polymerization. Detailedly, 7.27 g zinc trifluoromethanesulfonate (Zn(CF3SO3)2, 98%, Macklin) was fully dissolved into 20 mL DI water at room temperature. Then, 2 g gelatin (photographic grade, Aladdin) and 30 mg potassium persulfate (KPS) were added in turn to the solution, which were stirred slowly at 80 °C to accelerate dissolution and avoid bubbles. After cooling down to 40 °C, 3 g acrylamide (AM, AR grade, Macklin) and 3.5 mg N,N′-methylenebisacrylamide (BIS, CP grade, Aladdin) were added into the mixture solution ordinally [14 (link)]. After stirring 2 h for grafting reaction, the above solution was injected into a mold with a tiled polyester membrane, which was transferred into an oven at 60 °C for 2–3 h. Finally, a translucent 1 M Zn(CF3SO3)2 HPE with grafted structure was obtained. As a contrast, gelatin electrolyte (GE) film was obtained by the same way except for the addition of acrylamide and N,N′-methylenebisacrylamide.
+ Open protocol
+ Expand
7

Doxorubicin Nanoparticles for Cancer Treatment

Check if the same lab product or an alternative is used in the 5 most similar protocols
Doxorubicin hydrochloride (DOX) was purchased from J&K Scientific Technology Ltd. Co. 1,3,5-Trimethylbenzene (TMB) and acrylamide (AAm) were purchased from Macklin Reagent (Shanghai, China). Acrylonitrile (AN) and Pluronic® F-127 were purchased from Aladdin Industrial Inc (Shanghai, China). 4-Cyano-4-((phenylcarbonothioyl) thio) pentanoic acid (CPTD), 4’, 6-diamidino-2-phenylindole dihydrochloride (DAPI) were obtained from Sigma-Aldrich (Missouri, USA). Annexin V-FITC Apoptosis Detection Kit was provided by KeChuang Biotechnology Inc (Suzhou, China). All other reagents and solvents were purchased from Sinopharm Chemical Reagent Inc. (Shanghai, China).
+ Open protocol
+ Expand
8

Synthesis of Polymeric Materials

Check if the same lab product or an alternative is used in the 5 most similar protocols
All chemicals, including sulfur powder (Sinoreagent), CuSO4 (Sinoreagent), KOH (Aladdin), ZnSO4 (Sinoreagent), thiourea (Sinoreagent), acrylamide (Macklin), potassium persulfate (Sinoreagent), and N, N′-methylene bisacrylamide (Macklin), were used without further purification.
+ Open protocol
+ Expand
9

Biomimetic Hydrogel Synthesis and Characterization

Check if the same lab product or an alternative is used in the 5 most similar protocols
Polycaprolactone diol (PCL, 99%), PolyHexamethylene diisocyanate (PHMD, 99%), Hexamethylene diisocyanate (HDI, 99%), Dibutyltin dilaurate (DBTDL, 99%), butyl ethanoate (99%), Acrylamide (AAm, 96%), methacrylic acid (AA, 98%), N,N′-Methylenebis(Acrylamide) (BIS, 99%), Ammonium persulfate (APS), tetramethylethylenediamine (TEMED, 99%) and Ammonium peroxodisulfate (APS, 98%) were purchased from Macklin Inc., Rochelle, IL, USA. All the chemical reagents were used as received.
+ Open protocol
+ Expand
10

Synthesis of Alginate-based Hydrogel

Check if the same lab product or an alternative is used in the 5 most similar protocols
Sodium alginate (SA, viscosity (10 g L−1, 20 °C) >0.02 Pa S) was purchased from Sinopharm Group Reagent Co., Ltd; acrylamide (AM, 99.0%), stearyl methacrylate (SMA, 96%) and ammonium persulfate (APS, >99%) were provided by Shanghai Macklin Biochemical Co., Ltd; sodium dodecyl sulfate (SDS, CP) was obtained from Shantou Guanghua Chemical Factory (Guangdong, China); calcium chloride (CaCl2, AR) was purchased from Guangzhou Chemical Reagent Factory (Guangdong, China); all other reagents used were of analytical grade.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!