Log In Sign up
The largest database of trusted experimental protocols

Polyethersulfone pes

Manufactured by BASF
Visit Supplier
Sourced in Germany

Polyethersulfone (PES) is a high-performance engineering thermoplastic material used in various laboratory equipment applications. It offers excellent thermal and chemical resistance, as well as good mechanical properties. PES is widely used in the manufacturing of laboratory glassware, filtration membranes, and other specialized equipment.

Automatically generated - may contain errors

Lab products found in correlation

Tetraethyl orthosilicate teos, by Merck Group (1 mentions) Stannic chloride, by Merck Group (1 mentions) Bovine serum albumin (bsa), by Avantor (1 mentions) Polyvinylpyrrolidone pvp k30, by Merck Group (1 mentions) Chlorotrimethylsilane, by Merck Group (1 mentions) Triethylamine tea, by Merck Group (1 mentions) Chloroform, by Merck Group (1 mentions) Paraformaldehyde (pfa), by Merck Group (1 mentions) Dimethylformamide, by Merck Group (1 mentions) Polysulfone, by Merck Group (1 mentions) Hydrochloric acid (hcl), by Merck Group (1 mentions) Pluronic p123 eo20po70eo20, by Merck Group (1 mentions) Sodium dodecyl benzene sulfonate, by Sinopharm (1 mentions) Polyethylene glycol 400, by Merck Group (1 mentions) Milli q direct 8 purification system, by Merck Group (1 mentions) 1 3 5 benzenetricarbonyl trichloride, by Merck Group (1 mentions) Bovine serum albumin (bsa), by Merck Group (1 mentions) M phenylenediamine, by Merck Group (1 mentions) Sodium chloride (nacl), by Sinopharm (1 mentions) N hexane, by Sinopharm (1 mentions)

7 protocols using polyethersulfone pes

1

Polyether Sulfone Membrane Synthesis

Check if the same lab product or an alternative is used in the 5 most similar protocols
The base polymer, i.e., Polyether Sulfone (PES), with high molecular weight (50,000 g/mol), was purchased from BASF GmbH, Ludwigshafen, Germany. N-Methyl-2-Pyrrolidone (NMP) with a purity of 99.99% and Hydrochloric acid with 37%wt./wt. the aqueous solution was obtained from Merck. Tetraethyl orthosilicate (TEOS) (98% purity) and (3-aminopropyl) trimethoxysilane (APTMOS) (97% purity) were supplied by Sigma Aldrich. The pure gases CO2 and CH4 (99.99%) were supplied by Gas Walker Sdn Bhd. Double-deionized water was used for membrane synthesis.
Mannan H.A., Idris A., Nasir R., Mukhtar H., Qadir D., Suleman H, & Basit A. (2022). Interfacial Tailoring of Polyether Sulfone-Modified Silica Mixed Matrix Membranes for CO2 Separation. Membranes, 12(11), 1129.
+ Open protocol
+ Expand
2

Polysulfone and Polyethersulfone Membrane Synthesis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Polysulfone (PSF, MW = 35 000 g mol−1), chloroform, paraformaldehyde, chlorotrimethylsilane, stannic chloride, polyvinylpyrrolidone (PVP K30) and dimethylformamide (DMF) were purchased from Sigma-Aldrich, Australia. Polyethersulfone (PES, MW = 51 000 g mol−1) was purchased from BASF. 6-Hydroxy-2-naphthoic acid (HNA) was bought from ACROS, USA. Triethylamine (TEA) and hydrochloric acid (HCl) were purchased from Merck, Australia. Bovine serum albumin (BSA) was purchased from Amresco, Australia. All the chemicals were analytical grade and used without further purification.
Wu X., Xie Z., Wang H., Zhao C., Ng D, & Zhang K. (2018). Improved filtration performance and antifouling properties of polyethersulfone ultrafiltration membranes by blending with carboxylic acid functionalized polysulfone. RSC Advances, 8(14), 7774-7784.
+ Open protocol
+ Expand
3

Membrane Fabrication and Modification

Check if the same lab product or an alternative is used in the 5 most similar protocols
Different chemicals were used to fabricate the membranes and to synthesize mesoporous SBA-15 and SBA-Q as membrane modifiers. Polyethersulfone (PES; MW: 58,000 g/mol) was prepared from BASF Co., Germany. Hydrochloric acid (HCl 37%), tetraethoxysilane (TEOS 98%), glutamine, (3-chloropropyl) trimethoxysilane (CPTMS), toluene, and dimethylacetamide (DMAc) were all purchased from Merck Co. Germany. Pluronic P123 ((EO)20(PO)70(EO)20, MW: 5800) was supplied from Sigma-Aldrich Co. USA. Phosphate buffered saline (PBS) tablets were obtained from Zist Mavad Pharmed Co. Iran. All the reactants were used as received with no further purification. In all examinations, distilled water was applied.
Samari M., Kashanian S., Zinadini S, & Derakhshankhah H. (2024). Designing of a new transdermal antibiotic delivery polymeric membrane modified by functionalized SBA-15 mesoporous filler. Scientific Reports, 14, 10418.
+ Open protocol
+ Expand
4

Synthesis of PES Membranes

Check if the same lab product or an alternative is used in the 5 most similar protocols
Polyethersulfone (PES) with 75,000 MW and an industrial grade was purchased from BASF (Ludwigshafen, Germany). Dimethylformamide (DMF), ferrous (III)chloride hexahydrate, sodium boron hydride, methanol, hydrochloric acid, and sodium hydroxide were purchased from Merck chemical groups (Darmstadt, Germany).
Noorbakhsh R., Koohi M.K., Hassan J., Rahmani A., Rashidi Nodeh H, & Rezania S. (2022). Magnetic Beads of Zero Valent Iron Doped Polyethersolfun Developed for Removal of Arsenic from Apatite-Soil Treated Water. International Journal of Environmental Research and Public Health, 19(19), 12697.
+ Open protocol
+ Expand
5

Membrane Fabrication from Polyethersulfone

Check if the same lab product or an alternative is used in the 5 most similar protocols
Polyethersulfone (PES, Mw = 45 000) was purchased from BASF Co. Ltd. (German). PES was used for membrane preparation after dried about 24 h at 333 K. N,N-Dimethyl acetamide (DMAC), diethylene glycol (DEG) were provided by Shanghai Chemical Reagent Co. Ltd. Bisphenol sulfuric acid (BPA-PS, Mw = 97 000) was provided by Shanghai Institute of Organic Chemistry, Chinese Academy of Sciences. Bovine serum albumin (BSA, Mw = 67 000) was provided by Shanghai Lianguan Biochemical Engineering Co. Ltd. All of the pure water in this work was self-made.
Liu S.H., Liu M., Xu Z.L, & Wei Y.M. (2018). A polyethersulfone–bisphenol sulfuric acid hollow fiber ultrafiltration membrane fabricated by a reverse thermally induced phase separation process. RSC Advances, 8(14), 7800-7809.
+ Open protocol
+ Expand
6

Synthesis and Characterization of Polymer Membranes

Check if the same lab product or an alternative is used in the 5 most similar protocols
N-methyl-2-pyrrolodinone (NMP, ≥99.5%), bovine serum albumin (BSA, ≥96%), polyethylene glycol 400 (PEG, Mn = 400g/mol), m-phenylene diamine (MPD, ≥99%), fluorescein isothiocyanate conjugated bovine serum albumin (BSA-FITC) and 1,3,5-benzenetricarbonyl trichloride (TMC, ≥99.9%) were purchased from Sigma-Aldrich (Shanghai, China). Sodium alginate (SA, C6H7NaO6, ≥96%), sodium sulfate (Na2SO4, ≥96%), sodium dodecyl benzene sulfonate (SDBS, ≥96%), N-hexane (≥96%) and sodium chloride (NaCl, ≥96%) were provided by Sinopharm Chemical Reagent Co., Ltd. (Shanghai, China). Polyether sulfone (PES) was provided by BASF Co., Ltd. (Shanghai, China). Edible oil was purchased from Guo Brothers Grain Oil Co., Ltd. (Malaysia, Singapore). Yeast was purchased from Angel Yeast Co., Ltd. (Shanghai, China). Carbon fiber paper was obtained from Ce-Tech Co., Ltd. (Wuhan, China). All solutions were prepared with deionized water (DI-H2O) supplied by a Milli-Q Direct 8 purification system (Millipore, Burlington, MA, USA).
Ma C., Yi C., Li F., Shen C., Wang Z., Sand W, & Liu Y. (2020). Mitigation of Membrane Fouling Using an Electroactive Polyether Sulfone Membrane. Membranes, 10(2), 21.
+ Open protocol
+ Expand
7

Synthesis of PES-based Membranes

Check if the same lab product or an alternative is used in the 5 most similar protocols
Phthalic anhydride (Ph-An; 99%) and diisopropanolamine (DIPA; 98%) were purchased from Fluka, Germany. Silver nitrate (AgNO3; 99%) and N-methyl-2-pyrrolidone (NMP) were purchased from Sigma-Aldrich, Germany. Polyethersulfone (PES; Mn 49 000 g mol−1) was supplied by BASF, Germany. Other chemicals were of analytical grade.
El-Gendi A., Ghanem A.F., Yassin M.A, & Abdel Rehim M.H. (2020). Antifouling and antimicrobial polyethersulfone/hyperbranched polyester-amide/Ag composite. RSC Advances, 10(41), 24169-24175.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!