The largest database of trusted experimental protocols

Hematoxylin eosin stain kit

Manufactured by Vector Laboratories
Sourced in United States

The Hematoxylin & Eosin Stain Kit is a laboratory product that provides the necessary components for performing a widely used staining technique. Hematoxylin stains cell nuclei blue, while Eosin stains the cytoplasm and other structures pink or red. This staining method is commonly used in histology and pathology to enhance the contrast and visualization of cellular and tissue structures for microscopic examination.

Automatically generated - may contain errors

6 protocols using hematoxylin eosin stain kit

1

Histological Analysis of Murine Lung Injury

Check if the same lab product or an alternative is used in the 5 most similar protocols
The mice (n = 3) were anesthetized with isoflurane; the right lower lung tissue was fixed in 4% paraformaldehyde for 48 hours. After dehydration with graded ethanol, the tissues were embedded in paraffin, cut into 5 μm sections by a microtome, deparaffinized and rehydrated. Hematoxylin & Eosin Stain Kit (Vector Laboratories,California, USA) was used for subsequent staining according to the manufacturer’s protocol. After staining, the samples were observed under a light microscope and photographed at 200× magnification. The degree of lung injury was quantified by the lung injury score [12 (link)].
+ Open protocol
+ Expand
2

Histological Analysis of Murine Hearts

Check if the same lab product or an alternative is used in the 5 most similar protocols
Unstained, formalin-fixed, paraffin-embedded heart sections (5 μm) of WT and Sorbs2 KO mice were stained with hematoxylin and eosin (H&E) by using Hematoxylin & Eosin stain kit (Vector Laboratories, Inc., Burlingame, CA, USA). H&E stained sections were imaged using an EVOS microscope at the Microscopy and Cell Analysis Core Facility of Mayo Clinic in Rochester campus.
+ Open protocol
+ Expand
3

Hematoxylin and Eosin Staining of Brain Sections

Check if the same lab product or an alternative is used in the 5 most similar protocols
All the products described in this protocol were available in the Hematoxylin & Eosin Stain Kit (Vector Laboratories). Stainings were performed as indicated by the manufacturer. Floating 40–50 μm brain sections were mounted on Inkjet Plus Microscope Slides (Fisher Scientific) and dried until the tissue was completely attached to the surface (1 h approximately). Slides were then rinsed in water for 5 s. Hematoxylin was applied to completely cover the tissue sections and incubated for 5 min. Slides were rinsed in two changes of distilled water (15 s each) to remove excess stain. Bluing reagent was applied to completely cover the tissue and incubated for 15 s. Slides were rinsed in 2 changes of distilled water (15 s each). Slides were dipped in 100% ethanol (10 s). Eosin Y solution was applied completely covering the tissue, incubated for 3 min, and washed in 100% ethanol for 10 s. Finally, the slide was dehydrated in 3 changes of 100% ethanol and mounted in VectaMount Mounting Medium (Vector laboratories). Images were acquired at an Olympus vs-120 microscope using a 20x objective and processed in ImageJ.
+ Open protocol
+ Expand
4

Histological Analysis of Ovary and Thyroid

Check if the same lab product or an alternative is used in the 5 most similar protocols
After 10 % neutral buffered formalin fixed 72 h, ovary and thyroid were separately embedded in paraffin by standard histological method., the tissues were sectioned coronally in 5 μm thickness, and then slices were conducted after dewaxing and hydration procedures. The sections were thereafter routinely stained with Hematoxylin-Eosin Stain kit (Vector laboratories, USA) according to the manufacturer's instructions. The sections of the ovary and thyroid were evaluated under a light microscope and photographed with image acquisition parameters settings at 100 × and 400 × throughout the process.
+ Open protocol
+ Expand
5

Immunohistological Analysis of Lung Tissue

Check if the same lab product or an alternative is used in the 5 most similar protocols
Excised lungs were paraffinized and cut into 5 μm sections. Sections were stained with a Hematoxylin & Eosin Stain kit (Vector Laboratories, Burlingame, CA, USA) according to the manufacturer’s protocol. Immunohistology was used to identify the spatial distribution of CD4+ and CD8+ T cells or CD68+ macrophage cells. After deparaffinization and rehydration, antigen retrieval was performed for 20 min at sub-boiling temperature with 10 mM of citrate buffer (pH = 6.0). Immunostaining was performed using VectaStain Elite ABC and Avidin/Biotin Blocking Kits, biotinylated anti-rat IgG, and ImmPACT DAB kit (all from Vector Laboratories), according to the manufacturers’ instructions. The dilutions of the primary antibodies used were as follows: CD68 (DAKO) 1:200, CD4 (Roche, Basel, Switzerland) 1:200, and CD8 (Invitrogen) 1:100. Sections were counterstained with hematoxylin.
+ Open protocol
+ Expand
6

Hematoxylin and Eosin Staining of Brain Sections

Check if the same lab product or an alternative is used in the 5 most similar protocols
All the products described in this protocol were available in the Hematoxylin & Eosin Stain Kit (Vector Laboratories). Stainings were performed as indicated by the manufacturer. Floating 40–50 μm brain sections were mounted on Inkjet Plus Microscope Slides (Fisher Scientific) and dried until the tissue was completely attached to the surface (1 h approximately). Slides were then rinsed in water for 5 s. Hematoxylin was applied to completely cover the tissue sections and incubated for 5 min. Slides were rinsed in two changes of distilled water (15 s each) to remove excess stain. Bluing reagent was applied to completely cover the tissue and incubated for 15 s. Slides were rinsed in 2 changes of distilled water (15 s each). Slides were dipped in 100% ethanol (10 s). Eosin Y solution was applied completely covering the tissue, incubated for 3 min, and washed in 100% ethanol for 10 s. Finally, the slide was dehydrated in 3 changes of 100% ethanol and mounted in VectaMount Mounting Medium (Vector laboratories). Images were acquired at an Olympus vs-120 microscope using a 20x objective and processed in ImageJ.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!