N,N-Dimethylacrylamide (DMA) was purchased from Beijing HWRK Chem. Co, Ltd., China. Gelatin (type A, from porcine skin with gel strength about 300 g Bloom) and octadecyl acrylate (C18) were purchased from Sigma-Aldrich Company. Ammonium persulfate (APS) was purchased from Beijing Chemical Reagents Company. Clay was obtained from Siping Liufangzi Aska bentonite Co, Ltd., China. Murine osteoblast MC3T3-E1 were provided by Beijing Jishuitan Hospital, China. Fetal bovine serum (FBS), α-modified minimum essential medium (α-MEM), and penicillin–streptomycin were purchased from Hyclone, America. CCK-8 and phosphate buffer solution (PBS) were purchased from Shanghai Biyuntian Bio-Technology Co, Ltd., China. All the chemicals were used without further purification.
Octadecyl acrylate
Manufactured by Merck Group
Sourced in United States, Spain
Octadecyl acrylate is a chemical compound used in the manufacturing of various laboratory equipment and materials. It is a long-chain acrylate ester that is commonly used as a monomer in the production of polymers and copolymers. The specific core function of octadecyl acrylate in laboratory equipment is to provide desired physical and chemical properties to the final product.
Automatically generated - may contain errors
Lab products found in correlation
Gelatin type a, by Merck Group (1 mentions)
Cck 8, by Beyotime (1 mentions)
Butyl acrylate, by Merck Group (1 mentions)
2 2 dimethoxy 2 phenylacetophenone, by Merck Group (1 mentions)
Dkn302, by Yamato Scientific (1 mentions)
Horse heart cytochrome c, by Merck Group (1 mentions)
Butyl methacrylate, by Merck Group (1 mentions)
Egg white lysozyme, by Merck Group (1 mentions)
Trimethylolpropane trimethacrylate, by Merck Group (1 mentions)
Ovalbumin (ova), by Merck Group (1 mentions)
2 2 azobisisobutyronitrile, by Merck Group (1 mentions)
Ribonuclease a, by Merck Group (1 mentions)
1 dodecanol, by Merck Group (1 mentions)
Bovine serum albumin (bsa), by Merck Group (1 mentions)
Trifluoroacetic acid, by Merck Group (1 mentions)
Ethylene glycol, by Merck Group (1 mentions)
Ethylene glycol dimethacrylate, by Merck Group (1 mentions)
Benzonitrile, by Merck Group (1 mentions)
Methyl methacrylate, by Merck Group (1 mentions)
Cyclohexanol, by Merck Group (1 mentions)
4 protocols using octadecyl acrylate
1
Osteoblast Cell Culture Protocol
Check if the same lab product or an alternative is used in the 5 most similar protocols
N,N-Dimethylacrylamide (DMA) was purchased from Beijing HWRK Chem. Co, Ltd., China. Gelatin (type A, from porcine skin with gel strength about 300 g Bloom) and octadecyl acrylate (C18) were purchased from Sigma-Aldrich Company. Ammonium persulfate (APS) was purchased from Beijing Chemical Reagents Company. Clay was obtained from Siping Liufangzi Aska bentonite Co, Ltd., China. Murine osteoblast MC3T3-E1 were provided by Beijing Jishuitan Hospital, China. Fetal bovine serum (FBS), α-modified minimum essential medium (α-MEM), and penicillin–streptomycin were purchased from Hyclone, America. CCK-8 and phosphate buffer solution (PBS) were purchased from Shanghai Biyuntian Bio-Technology Co, Ltd., China. All the chemicals were used without further purification.
+ Expand
N,N-Dimethylacrylamide (DMA) was purchased from Beijing HWRK Chem. Co, Ltd., China. Gelatin (type A, from porcine skin with gel strength about 300 g Bloom) and octadecyl acrylate (C18) were purchased from Sigma-Aldrich Company. Ammonium persulfate (APS) was purchased from Beijing Chemical Reagents Company. Clay was obtained from Siping Liufangzi Aska bentonite Co, Ltd., China. Murine osteoblast MC3T3-E1 were provided by Beijing Jishuitan Hospital, China. Fetal bovine serum (FBS), α-modified minimum essential medium (α-MEM), and penicillin–streptomycin were purchased from Hyclone, America. CCK-8 and phosphate buffer solution (PBS) were purchased from Shanghai Biyuntian Bio-Technology Co, Ltd., China. All the chemicals were used without further purification.
2
Facile Synthesis of PEDOT-TMA Polymer
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Initially, 5.1 g of octadecyl acrylate (Sigma‐Aldrich), 0.9 g of butyl acrylate (Sigma‐Aldrich), 0.06 g of 2,2‐dimethoxy‐2‐phenylacetophenone (Sigma‐Aldrich), and 1.5 g of THF (FUJIFILM Wako Pure Chemical Corporation) were mixed. 0.05 wt% PEDOT‐TMA (in nitromethane, Sigma‐Aldrich) was added to this mixture. When 0.06, 0.15, 0.30, and 0.60 g of PEDOT‐TMA solutions were introduced into the monomer solution, they corresponded to the final PEDOT‐TMA concentrations of 0.005, 0.015, 0.025, and 0.050 wt%, respectively, for the polymer. Before adding, the PEDOT‐TMA solution was alternately stirred three times using a vortex mixer (VTX‐3000L, LMS) and sonicated for 3 min using an ultrasonic cleaner (AS482, AS ONE). The mixed solution was stirred for more than 2 h at >1000 rpm using a magnetic stirrer (HPS‐100T, AS ONE) with wrapping aluminum foil. The solution was then irradiated with UV light for 2 h using an 8 W UV lamp (UVL‐28 EL Series UV Lamp, Funakoshi) at a wavelength of 365 nm for polymerization. After UV irradiation, the polymer was stored overnight in a vacuum dryer (VO‐FR1, AS ONE). Furthermore, the polymer was placed in an oven (DKN302, Yamato Scientific) and heated at 80 °C for 1 h to remove the residual solvent.
3
Synthesis and Characterization of Functional Polymers
4
Miniemulsion Polymerization of IBOMA/2-OA with CeO2 Nanoparticles
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
IBOMA (Evonik, Essen, Germany) and 2-OA (Arkema, Colombes, France) monomers were used as supplied. The thermal initiator azobisisobutyronitrile (AIBN, Sigma-Aldrich, Madrid, Spain) and the polymerizable surfactant Sipomer® PAM200 (Solvay) were used as received. Octadecyl acrylate (Sigma-Aldrich, Madrid, Spain) was used as co-stabilizer during the miniemulsion polymerization. A solution of CeO2 nanoparticles (NANO BYK 3812) was kindly supplied by ALTANA (Wesel, Germany). In order to obtain the pure nanoparticles, the solvent was evaporated in an oven at 60 °C for 48 h. The resulting crystals were grinded before their use. Distilled water (MilliQ quality) was used in all reactions. Sodium bicarbonate (Sigma-Aldrich, Madrid, Spain) and ammonium hydroxide solution (25%, Sigma-Aldrich, Madrid, Spain) were used to adjust pH values. Steel substrates (medium carbon steel with 0.5% of C) were purchased from URDURI ACEROS. UniClean 251 (Atotech, Erandio, Spain) was used as a degreasing agent for the steel substrates. HCl 1 M solution (Sigma-Aldrich, Madrid, Spain) was used in the cleaning treatment of the steel substrates. High purity NaCl (Corrosalt, Ascott-Analytical, Tamworth, UK) was used for the preparation of a 3.5 wt% solution for the corrosion test.
About PubCompare
Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.
We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.
However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.
Ready to get started?
Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required
Revolutionizing how scientists
search and build protocols!