The largest database of trusted experimental protocols

Discovery mr750 3t system

Manufactured by GE Healthcare
Sourced in United States

The Discovery MR750 3T system is a high-field magnetic resonance imaging (MRI) scanner developed by GE Healthcare. It operates at a magnetic field strength of 3 Tesla, providing enhanced image quality and detail compared to lower-field MRI systems. The core function of the Discovery MR750 3T is to generate detailed images of the human body for diagnostic and clinical applications.

Automatically generated - may contain errors

Lab products found in correlation

5 protocols using discovery mr750 3t system

1

3T MRI Diffusion Tensor Imaging of Sedated Children

Check if the same lab product or an alternative is used in the 5 most similar protocols
MRI scans were acquired on a GE Discovery MR750 3 T system at the First Affiliated Hospital of Jinan University, China. An eight-channel phased-array head coil was used for the imaging experiments. The children were sedated for imaging using oral chloral hydrate (0.8~0.9 ml/kg). A pediatrician trained in MRI procedures was in attendance throughout the examination. The DTI scan consisted of a single-shot diffusion-weighted EPI sequence with the following parameters: TR/TE = 5000/70 ms, matrix = 256 * 256, FOV = 256 mm, slice thickness = 3 mm without gap, number of slices = 46 axial slices, diffusion directions = 25, b-values = 0 and 1000 s/mm2. A 3D-BRAVO sequence was collected for anatomical localization with the following parameters: TR/TE = 8.2/3.2 ms, inversion time (TI) = 450 ms, flip angle = 12°, matrix = 256 * 256, FOV = 240 mm, slice thickness = 1.0 mm without gap.
+ Open protocol
+ Expand
2

T1-weighted MRI Acquisition and Brain Tissue Segmentation

Check if the same lab product or an alternative is used in the 5 most similar protocols
Three-dimensional, T1-weighted images for each participant were acquired at Taipei Veterans General Hospital by using a Discovery MR750 3T system (GE Healthcare, Chicago, IL, USA), with a rapid acquisition gradient echo. All the participants were instructed to close their eyes, hold still, and relax during the acquisition. The image parameters were repitition time (TR) = 12.2 ms, echo time (TE) = 5.2 ms, flip angle = 12°, field of view (FOV) = 256 × 256 × 168 mm3, matrix size = 256 × 256 × 168, slice thickness = 1 mm, and voxel size = 1 × 1 × 1 mm3.
The skull-stripping and intensity non-uniformity correction on the T1-weighted images were performed using a hybrid watershed algorithm [38 (link)], as well as nonparametric, nonuniform intensity normalization [39 (link)] implemented by the Freesurfer software (http://surfer.nmr.mgh.harvard.edu). The brain tissue was then further segmented into GM, WM, and cerebrospinal fluid (CSF) areas by using the Statistical Parametric Mapping 12 package (http://www.fil.ion.ucl.ac.uk/spm).
+ Open protocol
+ Expand
3

SNR Evaluation of MRI Phantom and In-Vivo Imaging

Check if the same lab product or an alternative is used in the 5 most similar protocols
All experiments were performed on a GE Discovery MR750 3 T system. For the in-vitro experiments, the coil was loaded with a standard homogeneous rectangular ( 33cm×22cm×16cm ) phantom. Phantom images were acquired using a fast spin echo sequence with the following parameters: TR=315 ms, TE=68.7 ms, 1mm×1mm×3mm , NEX=1 . For in-vivo experiments, a healthy volunteer (F, Age = 29) was used. In-vivo images were acquired using the same fast spin echo sequence. The SNR values were calculated according to Method 4 described in the NEMA Standards Publication MS 1-2008 (R2014, R2020), as the ratio of the mean pixel value of signal within the specified ROI divided by the standard deviation of the noise calculated in the background region of the image, well removed from the phantom and any visible artifacts. The SNR maps were calculated by dividing the entire image by the standard deviation of the noise calculated as described above. The study was performed with ethical approval from the Weill Cornell Medicine Institutional Review Board and in accordance with all applicable regulations. Informed consent was obtained from the volunteer.
+ Open protocol
+ Expand
4

Alt-SSFP fMRI Comparison at 3T

Check if the same lab product or an alternative is used in the 5 most similar protocols
All experiments were performed on a GE Discovery MR750 3T system (50 mT/m maximum gradient strength and 200 mT/m/ms maximum slew rate) with a 32-channel head coil (Nova Medical Inc.). A total of 11 normal and healthy volunteers participated in the study with the approval of the Stanford University Institutional Review Board (6 males, 5 females). All subjects were individually recruited for breath-hold and visual studies; some subjects participated in both studies in separate sessions.
Alt-SSFP experiments were conducted with the following parameters: TR = 14.3 ms, flip angle = 35°, acquisition matrix = 80 × 80 × 22, receiver bandwidth = ±62.5 kHz. Two dummy scans were acquired in the beginning of each scan, in addition to one fully-sampled reference scan used for GRAPPA reconstruction. For comparison, a 2D single-shot EPI GRE sequence was performed with a flip angle = 77°, and TE = 30 ms. The TR of the GRE sequence was prescribed as the total time to acquire all the 2D slices, which was made equal to the total volume time of the 3D alt-SSFP sequence (3.46 s). GRE-EPI and alt-SSFP fMRI experiments were conducted with identical spatial and temporal resolution for each type of stimulus study. A high resolution T1-weighted anatomical scan was obtained after each set of fMRI scans for co-registration and group-analysis purposes.
+ Open protocol
+ Expand
5

Resting-State fMRI Acquisition Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Scanning was performed on a General Electric Discovery MR750 3 T system (Milwaukee, WI, USA) at the Institute of Psychiatry, Psychology & Neuroscience, King's College London. For the rs-fMRI, participants were asked to lie still with their eyes open, and to think of nothing in particular while a fixation cross was displayed in the center of a screen which they viewed through a mirror system. Scanning time for the rs-fMRI was 12 min. During this time, ME-EPI images sensitive to BOLD contrast were acquired to measure hemodynamic responses (repetition time: 2500 ms; echo times, 12, 28, 44, 60 ms; flip angle, 80°; 4.0 × 4.0 × 3.0-mm voxels; field of view, 240; 32 axial sections collected with sequential (top down) acquisition and 1-mm interslice gap). A structural scan was acquired for co-registration of the ME-EPI data by means of a three-dimensional T1-weighted inversion recovery-prepared gradient echo sequence (voxel size: 1.05 × 1.05 × 1.2 mm, field of view: 270 mm, 196 slices, repetition time: 7.3 ms, echo time: 3.0 ms, inversion time: 400 ms).
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!