The largest database of trusted experimental protocols

Bioflash

Manufactured by Werfen
Sourced in Spain

Bioflash is a compact, automated chemiluminescence immunoassay analyzer designed for the quantitative determination of various analytes in clinical laboratory settings. It offers efficient sample processing and reliable results.

Automatically generated - may contain errors

5 protocols using bioflash

1

Vasculitis Biomarker Detection Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Blood samples were collected from patients with symptoms compatible with vasculitis. Blood was centrifuged for 5 min at 3000 rpm to separate the serum, and anti-MPO and anti-PR3 were determined by chemiluminescence (Bioflash, Werfen). The measuring range for anti-MPO antibodies was 3.2–739.8 CU and for anti-PR3 antibodies was 2.3–3285.3 CU. ANCA were not tested by indirect immunofluorescence (IIF).
Statistical analysis was performed using Graph Pad Prism software 6.0 version. Cut-off points were established following a receiver operating characteristic (ROC) curve. The results were expressed as mean, standard deviation (SD), and percentages. The distribution of continuous variables was assessed using Kolmogorov–Smirnov/Shapiro–Wilk tests. Comparisons were based on non-parametric U-Mann–Whitney tests. A two-sided p-value < 0.05 was considered statistically significant.
+ Open protocol
+ Expand
2

Autoantibody Measurement Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Rheumatoid factor were measured by immunonephelometry (BN2 siemens); anti-citrullinated protein antibody by chemiluminescence (Bioflash, Werfen), and C-reactive protein by immunoturbidimetry (C8000 roche).
+ Open protocol
+ Expand
3

Fecal Calprotectin Quantification Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Fecal calprotectin was measured using the BIOFLASH (Werfen, Barcelona, Spain) chemo-luminescent analyzer platform according to ISO 15,189 standards. Assay sensitivity was greater than 20 µg/mL. The total protein concentration of the samples was measured by the colorimetric method (BCA Protein assay, Thermo Fisher Scientific).
+ Open protocol
+ Expand
4

Autoimmune Antibody Profiling Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Anti-dsDNA, Sm, SSB-La, SSA-Ro and U1-RNP levels were determined in serum using BIO-FLASH® chemiluminescence (Werfen, Barcelona, Spain). Anti-C1q levels in serum were quantified by Quanta Lite Anti-C1q ELISA (Inova Diagnostic, San Diego, CA, USA). Anti-histone presence in serum was established using Euroline ANA Perfil (Euroimmune, Lübeck, Germany). Levels of C3 in serum were determined using the Nephelometry System (Beckman Coulter Diagnostics, Nyon, Switzerland). Albumin/creatinine ratio was determined in serum by the turbidimetry system (Abbott, Chicago, IL, USA). The presence of hematuria was determined by the Combur test (Roche, Basilea, Switzerland). Anti-dsDNA antibodies were considered positive when levels were >35 UI/mL. Sm, SSB-La, SSA-Ro and U1-RNP antibodies were considered positive when levels were >20 Chemoluminiscence Units and C1q when levels were >20 U/mL according to manufacturer’s study. C3 levels were considered decreased when they were below 85 mg/dL according to manufacturer’s study. Microalbuminuria was considered when albumin/creatinine ratio was >2.5 mg/mmol.
+ Open protocol
+ Expand
5

Plasma VWF and FVIII Measurement Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Plasma samples from Leiden were measured for VWF:Ag and VWF and FVIII activity by the clinical chemistry laboratory at the LUMC, Leiden. VWF:Ag in plasma was determined using the STA LIA VWF:Ag test (Stago) and was analyzed on the Sta‐R Max analyser (Stago) with a commercial STA VWF:Ag calibrator (STA Unicalibrator, Stago) as reference. VWF activity was determined with the VWF ristocetin‐triggered GPIb binding assay (VWF:GPIbR) with HemosIL AcuStar VWF:RCo reagent (Werfen IL). Samples were analyzed on the BIO‐FLASH (Werfen) and a commercial calibrator (supplied with the HemosIL AcuStar VWF:RCo) was used as reference. FVIII activity was determined using an automated one‐stage clotting assay on the STA‐R MAX analyzer (Stago) with Sta‐immunodef VIII (Stago) and STA‐CK Prest 5 (APTT; Stago) reagents. Commercial normal pool plasma (STA Unicalibrator, Stago) was used as reference. At Kingston, only VWF:Ag was measured in the plasma samples, and this was done by ELISA as previously described.22
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!