The largest database of trusted experimental protocols

5 protocols using water purification system

1

Development and Validation of TD-GC-qMS Method

Check if the same lab product or an alternative is used in the 5 most similar protocols
The TD-GC-qMS method development was done using dimethyl sulphide (1, anhydrous, ≥ 99%), 2-methylbutanal (2, 95%), dimethyl disulphide (3, ≥ 98%), 2-hexanone (4, analytical standard), 1-octanol (6, anhydrous, ≥ 99%), 2-nonanone (7, ≥ 99%), 1-undecene (8, 97%), 1-decanol (9, ≥ 9 8%) and 2-aminoacetophenone (10, analytical standard) purchased from Sigma-Aldrich (Taufkirchen, Germany), and 2-heptanone (5, ≥ 98%) purchased from Merck KGaA (Darmstadt, Germany).
To verify the analysis of cyclic siloxanes by atmospheric pressure ionization (APPI), coupled with thermogravimetry (TG) and a qMS, three cyclic siloxanes were analysed as single standards. Octamethylcyclotetrasiloxane (D4, 98%, Alfa Aesar, Karlsruhe, Germany), decamethylcyclopentasiloxane (D5, 97%, Alfa Aesar, Karlsruhe, Germany) and dodecamethylcyclohexasiloxane (D6, 95%, Alfa Aesar, Karlsruhe, Germany) were used.
For all purposes, liquid chromatography-mass spectrometry (LC-MS) grade methanol from VWR (Leuven, Belgium) and ultrapure water, generated with a water purification system from Sartorius Stedim (Göttingen, Germany), were used. For cleaning purpose, Decon 90 from VWR (Leuven, Belgium) was used.
+ Open protocol
+ Expand
2

Synthesis of ZnO-based Optoelectronic Materials

Check if the same lab product or an alternative is used in the 5 most similar protocols
Triethoxysilane (TES) was purchased from Tokyo Chemical Industry Co., LTD. (Tokyo, Japan). Colloidal ink of zinc oxide (ZnO), 1-decene, hydrochloric acid (HCl) and molybdenum (IV) oxide (MoO3, 99.97% trace metal basis) were purchased from Sigma-Aldrich and used as received. 4,4′-Bis(carbazole-9-yl)biphenyl (CBP, 99.9% trace metals basis) was purchased from Luminescence Technology Corp. Electronic-grade hydrofluoric acid (HF, 48% aqueous solution) was purchased from Kanto Chemical Co., INC. Toluene (HPLC-grade), chloroform, ethanol (99.5), methanol, and Zn powder were purchased from Wako Chemical. Milli-Q water (resistivity = 18.2 MΩ·cm) was obtained by Sartorius water purification system (arium 611 UV).
+ Open protocol
+ Expand
3

Quantitative Analysis of Mildronate

Check if the same lab product or an alternative is used in the 5 most similar protocols
1,1‐Dimethylhydrazine, tert‐butylhydroquinone, methyl‐acrylate, dimethylsulphate‐D6, calcium hydroxide and the reference compound of Mildronate dihydrate were obtained from Sigma‐Aldrich (Deisendorf, Germany), while Mildronate‐D3 was synthesized in house for the use as internal standard (IS). Acetonitrile and acetone were bought from VWR International (Darmstadt, Germany). Acetic acid, ammonium acetate, and ethanol were supplied by Merck (Darmstadt, Germany). Deionized water was obtained from a water purification system (Sartorius Stedim Biotech S.A., Aubagne, France).
+ Open protocol
+ Expand
4

Electrochemical Characterization of Modified Electrodes

Check if the same lab product or an alternative is used in the 5 most similar protocols
A three-electrode cell was used for performing electrochemical experiments, with a glassy carbon electrode (GCE) or modified GCE, a platinum wire (d = 0.5 mm), and an Ag|AgCl|KClsat electrode employed as the working, counter, and reference electrodes, respectively. Cyclic voltammetry measurements were performed using a µAutolabIII (Metrohm Autolab) potentiostat powered by GPES 4.9 software. All experiments were performed at ambient temperature (22 ± 3 °C). XPS analysis was performed with a Scanning XPS Microprobe instrument -PHI 5000 VersaProbe (ULVAC-PHI, Japan/USA); details are described elsewhere [18] (link). TEM images were obtained and analyzed with a transmission electron microscope (Tecnai G2 Spirit BioTWIN). Demineralized and ultrapure water, with a specific resistivity of 18.2 MΩ cm, from a water purification system (Sartorius), was utilized for experiments.
+ Open protocol
+ Expand
5

Bovine Colostrum Immunoglobulin Purification

Check if the same lab product or an alternative is used in the 5 most similar protocols
Bovine colostrum powder was purchased from Kanpure Corporation (Heilongjiang, China). Bovine colostrums were obtained from Xiaoshan dairy farm (Hangzhou, China). The mixed-mode resin used in this study was HCIC resin; MEP HyperCel was purchased from Pall Corporation. Bovine IgG standard sample was purchased from Sigma (St. Louis, MO). Hi-Trap Protein G column was purchased from GE Healthcare (Piscataway, NJ). Electrophoresis kits were purchased from Bio-Rad (Hercules, CA). Deionized water used for buffer solutions was prepared by water purification system from Sartorius (Gottingen, Germany). All chemical reagents were analytical grade. The ÄKTA explorer 100 systems were purchased from GE Healthcare (Uppsala, Sweden).
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!