The largest database of trusted experimental protocols

Ziptip c4 micro columns

Manufactured by Merck Group
Sourced in United States

The ZipTip® C4 micro-columns are a type of sample preparation device used in analytical chemistry. They are designed to extract, concentrate, and purify analytes from complex samples prior to analysis. The ZipTip® C4 micro-columns contain a stationary phase of C4 reversed-phase material, which allows for the selective retention and elution of specific compounds based on their hydrophobic interactions.

Automatically generated - may contain errors

6 protocols using ziptip c4 micro columns

1

MALDI-TOF Protein Desalting and Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
A 2 μl protein sample was desalted using ZipTip® C4 micro-columns (Millipore) and eluted with 0.5 μl SA (sinapinic acid, 10 mg/ml in [70:30] Acetonitrile: Trifluoroacetic acid 0.1%) matrix onto a GroundSteel massive 384 target (Bruker Daltonics, Billerica, MA, USA). An Autoflex III MALDI-TOF/TOF spectrometer (Bruker Daltonics) was used in linear mode with the following settings: 5000–40000 Th window, linear positive mode, ion source 1: 20 kV, ion source 2: 18.5 kV, lens: 9 kV, pulsed ion extraction of 120 ns, high gating ion suppression up to 1000 Mr. Mass calibration was performed externally with protein 1 standard calibration mixture (Bruker Daltonics). Data acquisition, peak peaking and subsequent spectra analysis was performed using FlexControl 3.0 and FlexAnalysis 3.0 software (Bruker Daltonics).
+ Open protocol
+ Expand
2

MALDI-TOF/TOF Mass Spectrometry of Fab

Check if the same lab product or an alternative is used in the 5 most similar protocols
Prior to the measurement, all Fab preparations were desalted using ZipTip® C4 micro-columns (Millipore) (2 μL sample) with 0.5 μL SA buffer (sinapinic acid, 10 mg/ml in [70:30] Acetonitrile:Trifluoroacetic acid 0.1%), and arrayed onto a Ground Steel massive 384 target plate (Bruker Daltonics). Mass determinations were performed in a matrix-assisted laser desorption/ionization (MALDI), tandem time-of-flight (TOF/TOF) spectrometer Autoflex III (Bruker Daltonics). Mass calibration was performed externally with a Protein Calibration Standard 1 mixture (Bruker Daltonics) in the same mass range as the samples. Data acquisition, peak peaking and subsequent spectra analysis were performed using flexAnalysis 3.0 software (Bruker Daltonics).
+ Open protocol
+ Expand
3

MALDI-TOF Analysis of Conjugated Antibodies

Check if the same lab product or an alternative is used in the 5 most similar protocols
Prior to the measurement, conjugated antibodies were desalted using ZipTip® C4 micro columns (Millipore) (2 μL sample) with 0.5μL SA buffer (sinapinic acid, 10 mg/mL in [70:30] Acetonitrile:Trifluoroacetic acid 0.1%), and spotted onto a Ground Steel massive 384 target plate (Bruker Daltonics). Mass determination was performed by matrix-assisted laser desorption/ionization-time of flight (MALDI-TOF) analysis in an Autoflex III (Bruker Daltonics). Mass calibration was performed externally with a Protein Calibration Standard 1 (Bruker Daltonics) mixture in the same mass range as the samples. Data acquisition, peak peaking and subsequent spectra analysis were performed using flexAnalysis 3.0 software (Bruker Daltonics).
+ Open protocol
+ Expand
4

MALDI-TOF/TOF Mass Spectrometry of Fab

Check if the same lab product or an alternative is used in the 5 most similar protocols
Prior to the measurement, all Fab preparations were desalted using ZipTip® C4 micro-columns (Millipore) (2 μL sample) with 0.5 μL SA buffer (sinapinic acid, 10 mg/ml in [70:30] Acetonitrile:Trifluoroacetic acid 0.1%), and arrayed onto a Ground Steel massive 384 target plate (Bruker Daltonics). Mass determinations were performed in a matrix-assisted laser desorption/ionization (MALDI), tandem time-of-flight (TOF/TOF) spectrometer Autoflex III (Bruker Daltonics). Mass calibration was performed externally with a Protein Calibration Standard 1 mixture (Bruker Daltonics) in the same mass range as the samples. Data acquisition, peak peaking and subsequent spectra analysis were performed using flexAnalysis 3.0 software (Bruker Daltonics).
+ Open protocol
+ Expand
5

MALDI-TOF Protein Desalting and Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
A 10 μl protein sample was desalted using ZipTip® C4 micro-columns (Merck Millipore, Burlington, MS, USA) and eluted with 0.5 μl SA [sinapinic acid, 10 mg/ml in [70:30] Acetonitrile: Trifluoroacetic acid 0.1%] matrix onto a GroundSteel massive 384 target (Bruker Daltonics, Billerica, MA, USA). An Autoflex III MALDI-TOF/TOF spectrometer (Bruker Daltonics) was used in linear mode with the following settings: 5,000–40,000 Th window, linear positive mode, ion source 1: 20 kV, ion source 2: 18.5 kV, lens: 9 kV, pulsed ion extraction of 120 ns, high gating ion suppression up to 1,000 Mr. Mass calibration was performed externally with protein 1 standard calibration mixture (Bruker Daltonics). Data acquisition, peak peaking and subsequent spectra analysis was performed using FlexControl 3.0 and FlexAnalysis 3.0 software (Bruker Daltonics).
+ Open protocol
+ Expand
6

MALDI-TOF/TOF Analysis of Protein Samples

Check if the same lab product or an alternative is used in the 5 most similar protocols
A 2 μl protein sample was desalted using ZipTip® C4 micro-columns (Merck Millipore) and eluted with 0.5 μl sinapinic acid (10 mg/ml in [70:30] Acetonitrile: Trifluoroacetic acid 0.1%) matrix onto a GroundSteel massive 384 target (Bruker Daltonics). An Autoflex III MALDI-TOF/TOF spectrometer (Bruker Daltonics) was used in linear mode with the following settings: 5000–40,000 Th window, linear positive mode, ion source 1: 20 kV, ion source 2: 18.5 kV, lens: 9 kV, pulsed ion extraction of 120 ns, high gating ion suppression up to 1000 Mr. Mass calibration was performed externally with protein 1 standard calibration mixture (Bruker Daltonics). Data acquisition, peak peaking, and subsequent spectra analysis was performed using the FlexControl 3.0 and FlexAnalysis 3.0 software (Bruker Daltonics).
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!