Nova nano sem 450 instrument

Manufactured by Thermo Fisher Scientific

Sourced in United States

The Nova Nano SEM 450 is a high-resolution scanning electron microscope (SEM) designed for advanced imaging and analysis. It features a field emission gun (FEG) electron source, delivering high-quality, high-resolution images. The instrument is equipped with a wide range of analytical capabilities, including Energy-Dispersive X-ray Spectroscopy (EDS) and Electron Backscatter Diffraction (EBSD) detectors.

Automatically generated - may contain errors

Lab products found in correlation

Raman spectroscopy, by Horiba (1 mentions) Bx53 microscope, by Olympus (1 mentions) Q exactive orbitrap ms apparatus, by Thermo Fisher Scientific (1 mentions) Fetal bovine serum (fbs), by Thermo Fisher Scientific (1 mentions) Nanodrop one, by Thermo Fisher Scientific (1 mentions) Tcep solution, by Merck Group (1 mentions) Haucl4, by Strem Chemicals (1 mentions) Chi660c electrochemical workstation, by CH Instruments (1 mentions) Tmb substrate, by Neogen (1 mentions)

Close spelling variants of this product

Nova Nano 450 (34 citations) Nova 450 (16 citations) Nova Nano (9 citations) Nova SEM 450 (6 citations) Nano instrument (5 citations) Nova Nano 450 SEM (3 citations)

5 protocols using nova nano sem 450 instrument

Fabrication and Characterization of Mixed Anode Materials

Check if the same lab product or an alternative is used in the 5 most similar protocols

LTO and LCO procured from Sigma-Aldrich
and commercially available HC were used as received. The mixed anodes
were prepared by taking LTO and HC in two proportions: 50–50
and 20–80 by weight. The slurry was made by mixing the anode
powders with Super P and polyvinylidene fluoride binder in the ratio
of 80:10:10 and N-methyl-2-pyrrolidone as the solvent.
The slurry was coated on the Cu foil and was kept for drying overnight
at 80 °C. The slurry was coated on the Cu foil and was kept for
drying overnight at 80 °C. The foil was then punched into 1 cm² circular discs. PXRD was done using a Bruker D8-ADVANCE X-ray
diffractometer (Germany) with Cu Kα (wavelength = 1.5418 Å).
SEM was done using an FEI Nova Nano 450 SEM instrument.

Sharma N., Puthusseri D., Thotiyl M.O, & Ogale S. (2017). Hard Carbon and Li4Ti5O12-Based Physically Mixed Anodes for Superior Li-Battery Performance with Significantly Reduced Li Content: A Case of Synergistic Materials Cooperation. ACS Omega, 2(12), 8818-8824.

+ Open protocol

+ Expand

Characterization of Graphene on Cu Foil

Check if the same lab product or an alternative is used in the 5 most similar protocols

Tapping-mode AFM (Oxford Cypher VRS AFM system) was performed to characterize the surface morphology of the Cu foil before and after the electrochemical polishing pretreatment and the morphology and thickness of the graphene on SiO₂/Si. The nucleation density, grain size, and morphology of the prepared graphene were characterized using optical microscopy (Axio scope A1) and scanning electron microscopy (SEM). The SEM images were acquired by using an FEI Nova Nano450-SEM instrument at 10 kV. The layer numbers and defects of the graphene were identified by Raman spectroscopy (Horiba Evolution) with a 532-nm laser.

Li N., Zhen Z., Zhang R., Xu Z., Zheng Z, & He L. (2021). Nucleation and growth dynamics of graphene grown by radio frequency plasma-enhanced chemical vapor deposition. Scientific Reports, 11, 6007.

+ Open protocol

+ Expand

Multimodal Spectroscopic Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols

¹H NMR, ¹³C NMR, and ¹⁹F NMR spectra were detected on a Bruker Biospin AG-400 (Bruker Optics, Ettlingen, Germany) or a JEOL-ECX500 (Akishima, Japan) apparatus with internal standard tetramethylsilane (TMS). High resolution mass spectrometry (HRMS) spectra were performed on a Q-Exactive Orbitrap MS apparatus (Thermo Fisher Scientific, Waltham, MA, USA). Scanning electron microscopy (SEM) images were obtained by using a Nova Nano SEM 450 instrument (FEI, USA, 200 kV). Fluorescent images were achieved under an Olympus-BX53 microscope (Olympus, Tokyo, Japan). ADDS-307 conductivity meter (INESA and Scientific Instrument Co., Ltd., Shanghai, China) was employed to record electrical conductivity. All of the chemicals (≥95%) used for reaction were purchased from Bide Pharmatech Ltd. (Shanghai, China).

Xie J., Long Z.Q., Chen A.Q., Ding Y.G., Liu S.T., Zhou X., Liu L.W, & Yang S. (2023). Novel Sulfonamide Derivatives Containing a Piperidine Moiety as New Bactericide Leads for Managing Plant Bacterial Diseases. International Journal of Molecular Sciences, 24(6), 5861.

+ Open protocol

+ Expand

Electrochemical Biosensing of Biomarkers

Check if the same lab product or an alternative is used in the 5 most similar protocols

All nucleotide sequences used (Table 1 and Table S1, ordered from Sangon Biotech, Shanghai, China): tris (2-carboxyethyl) phosphine hydrochloride, named TCEP solution (Sigma-Aldrich, Shanghai, China); poly-HRP40 (streptavidin modified), named SA-polyHRP (Fitzgerald Industries International Inc., New Castle, DE, USA); TMB Substrate (Neogen, KY, USA); HAuCl₄ (99.8% Au, Strem Chemicals Inc., Bischheim, France); fetal bovine serum, named FBS (Invitrogen, Carlsbad, CA, USA); all chemical buffer (Sangon Biotech, Shanghai, China). We also used: 16-mutichannel screen-printed carbon electrode, named 16-SPCE (CH Instruments, Inc., Shanghai, China); CHI-660C electrochemical workstation (CH Instruments, Inc., Shanghai, China); NanoDrop One (Thermo Fisher Scientific Inc., Tumwater, WA, USA); Nova nanoSEM 450 instrument (FEI Company, Rockville, MD, USA); and AFM Multimode 8 instrument (Bruker, Billerica, CA, USA).
Human serum samples were derived from healthy human blood, which was donated by volunteers. First, the whole blood was centrifuged at 3500 rpm for 10 min, then the supernatant was collected and kept at 4 °C for later use.

Wang C., Wang W., Xu Y., Zhao X., Li S., Qian Q, & Mi X. (2022). Tetrahedral DNA Framework-Programmed Electrochemical Biosenors with Gold Nanoparticles for Ultrasensitive Cell-Free DNA Detection. Nanomaterials, 12(4), 666.

+ Open protocol

+ Expand

Characterization of LJ-Wp, LJ-Gp, and LJ-Yp

Check if the same lab product or an alternative is used in the 5 most similar protocols

LJ-Wp, LJ-Gp, and LJ-Yp were analyzed by infrared spectroscopy using the potassium bromide tablet method, and FI-IR was analyzed by Vertex 70 FT-infrared spectroscopy in transmission mode. The wavelength range is 400–4000 cm⁻¹, and the resolution is 1 cm⁻¹.
The molecular weights of LJ-Wp, LJ-Gp, and LJ-Yp were determined by GPC-LS-IR, and the morphological characteristics of them were determined using an FEI Nova Nano SEM 450 instrument. The specific experimental method refer to Zhang et al. [43 (link)].

Sun Q., Fang J., Wang Z., Song Z., Geng J., Wang D., Wang C, & Li M. (2022). Two Laminaria japonica Fermentation Broths Alleviate Oxidative Stress and Inflammatory Response Caused by UVB Damage: Photoprotective and Reparative Effects. Marine Drugs, 20(10), 650.

+ Open protocol

+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Revolutionizing how scientists
search and build protocols!