The largest database of trusted experimental protocols

Anti p histone h3 ser10

Manufactured by Cell Signaling Technology
Sourced in United States

Anti-p-Histone H3-ser10 is a laboratory reagent that specifically binds to and detects histone H3 protein phosphorylated at serine 10. This modification is associated with chromatin condensation and cell division.

Automatically generated - may contain errors

7 protocols using anti p histone h3 ser10

1

Protein Expression and Phosphorylation Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cells were collected and lysed with NP-40 lysis buffer with protease inhibitors. Lysates were analyzed for protein expression/phosphorylation as described previously [25 (link),27 (link)]. The following antibodies were used at the indicated dilutions; all antibodies were purchased from Cell Signaling (Danvers, MA, USA): anti-p-AKT-S473 (1:1000, #4060), anti-AKT (1:1000, #4685), anti-p-p44/42 MAPK (Erk1/2) -Thr202/Tyr204 (1:1000, #4370), anti- p44/42 MAPK (Erk1/2) (1:1000, #4695), anti-p-p38 MAPK-Thr180/Tyr182 (1:1000, #9211), anti-p38 MAPK (1:1000, #8690), anti-p-cdc2-Tyr15 (1:1000, #4539), anti-cdc2 (1:1000, #9116), anti-p-CDC25C-Ser216 (1:1000, #4901), anti-cdc25C(1:1000, #4688), anti-p-Histone H3-ser10 (1:1000, #53348).
+ Open protocol
+ Expand
2

Immunoblotting Analysis of Cellular Proteins

Check if the same lab product or an alternative is used in the 5 most similar protocols
The proteins of whole cell lysates were prepared in RIPA buffer containing protease and phosphatase inhibitors (Thermo Fisher Scientific, Waltham, MA, USA), and quantified by the bicinchoninic acid (BCA) method. Immunoblotting analysis of proteins in cell lysates was performed as previously described [26 (link)]. Primary antibodies used were as follows: anti-Aurora A (#12100), anti-p-Aurora A (Thr288) (#3079), anti-Histone H3 (#4499), and anti-p-Histone H3 (Ser10) (#9701), and anti-cleaved caspase 3 (#9661) were purchased from Cell Signaling Technology (Danvers, MA, USA); anti-PARP-1 (#sc-8007) and anti-GAPDH (#sc-25778) were purchased from Santa Cruz (CA, USA).
+ Open protocol
+ Expand
3

Fluorescence Microscopy Analysis of Mitotic Markers

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cells were cultured on glass slides coated with 0.05 mg/ml PDL (Sigma-aldrich, St. Louis, MO, USA) in the presence of TY-011 (0.8 μM) or equivalent amount of DMSO for 24 h. The cells were fixed in 4% paraformaldehyde at room temperature, then permeabilized with 0.15% Triton-X100 and blocked in 3% BSA in PBS. The primary antibodies were incubated with slides at 1:100 dilution in PBS containing 3% BSA in a wet chamber at 4 °C overnight. The secondary antibodies Alexa Fluor H 488 goat anti-rabbit IgG (H + L) or Alexa Fluor H 594 goat anti-mouse IgG (H + L) (Invitrogen, Carlsbad, CA, USA) were applied respectively for 2 h after the slides were washed with PBS thoroughly at room temperature. After the unbound antibodies were removed, the slides were dried and mounted with DAPI-fluoromount-G (Beyotime, Shanghai, China). The images were captured with FCFM (fluorescence confocal microscope) (Olympus FV1000 IX81, Tokyo, Japan) under appropriate excitation and emission filters or phase-contrast microscope (Olympus IX73, Tokyo, Japan). Primary antibodies used were as follows: anti-p-Aurora A (Thr288) (#3097) and anti-p-Histone H3 (Ser10) (#9701) were purchased from Cell Signaling Technology (Danvers, MA, USA); anti-MPM2 (anti-phospho-Ser/Thr-Pro) (#05-368) was purchased from Merck Millipore (Billerica, MA, USA); and anti-α-tubulin (sc-8035) was purchased from Santa Cruz (CA, USA).
+ Open protocol
+ Expand
4

Immunoblotting Analysis of Cellular Signaling

Check if the same lab product or an alternative is used in the 5 most similar protocols
Total cell lysates were prepared with 1% triton lysis buffer (25 mM Tris HCl (pH 8.0), 150 mM NaCl, 1% triton-X100, 1 mM dithiothreitol (DTT), protease inhibitor mix (Complete Mini, Roche) and phosphatase inhibitor (PhosphoStop, Roche)) and subjected to SDS-PAGE. The following antibodies were used for immunoblotting: anti-β-actin (Sigma-Aldrich), anti-cleaved PARP (Abcam, #ab32064), anti-PIP4K2A (#5527), anti-PIP4K2B (#9694), anti-cleaved caspase-3 (#9664), anti-pHistone H3(Ser10) (#3377), anti-pAkt(S473) (#9271), anti-pAkt(T308) (#13038), anti-total Akt (#9272), anti-p70S6K(T389) (#9234), anti-total p70S6K (#9202), anti-pErk (#4370), anti-γ-Histone H2AX (#9718) (Cell signaling), and anti-PIK3IP1 (Proteintech, #16826-1-AP). The secondary antibodies used were sheep anti-mouse IgG HRP and donkey anti-rabbit IgG HRP (Amersham; 1:2000 dilution). Immunoreactive proteins were visualized using ECL reagent (Amersham). Where indicated, intensities of protein bands were quantified by densitometry (Odyssey V3.0), normalized to their loading controls and then calculated as fold expression change relative to DMSO control. The uncropped scans of the blots were presented in Supplementary Fig. 9.
+ Open protocol
+ Expand
5

Molecular Mechanisms of Cell Cycle Regulation

Check if the same lab product or an alternative is used in the 5 most similar protocols
Nocodazole (Cat#487928) and Thymidine (Cat#89270) were purchased from Sigma-Aldrich LLC. Doxorubicin hydrochloride (Cat#2252) was obtained from R&D Systems, Inc. Irinotecan (Cat#S2217), oxaliplatin (Cat#S1224), and p53 activator nutlin3a (Cat#S8059) were all from Selleck Chemicals. Monoclonal antibody to PLK1 was purchased from Thermo Fisher Scientific Company. Antibody against CDC14B (Cat#sc-374572), cdc2 p34 (Cat#sc-54) and chk1 (Cat#sc-8408) were from Santa Cruz Biotechnology. Anti-p53 (Cat#2524), anti-p21 (12D1) (Cat#2947), anti-phospho-cdc2 (Tyr15) (Cat#9111), anti-phospho-cdc2 (Thr161) (Cat#9114), anti-Claspin (Cat#2800), anti-p-chk1 (ser-317) (Cat#8191), and anti-p-histone H3 (ser-10) (Cat#9701) antibodies were all from Cell Signaling Technology. CDC25A (Cat#ab989) and CDH1 (Cat#ab217038) were purchased from Abcam. Dulbecco’s Modified Eagle Medium (DMEM), fetal bovine serum (FBS), Trypsin (0.25%), and Penicillin- Streptomycin- Glutamine (100×) were obtained from Thermo Fisher Scientific company.
+ Open protocol
+ Expand
6

Cell Cycle Analysis by Flow Cytometry

Check if the same lab product or an alternative is used in the 5 most similar protocols
The LNCaP cells were harvested with trypsinization for flow cytometry as previously described [25 (link)]. Phospho-histone H3 (Ser10) was used as a marker of mitotic cells to distinguish the cell cycle phase between G2 and M. Cells were isolated and fixed (4% formaldehyde + 0.1% Triton X-100 in phosphate buffered saline (PBS) at room temperature for 10 minutes. The cells were washed with PBS and resuspened in 75 μl of 2% FBS in PBS. The cells were then incubated with anti-p-histone H3 (Ser10) (Cell Signaling Technology, Beverly, MA) antibody together with propidium iodide/RNAse A solution at room temperature in the dark for 60 minutes. The cells were rinsed two times and resuspended in 500 μl of 2% FBS in PBS and analyzed by flow cytometry with BD FACSverse (BD Biosciences, San Jose, CA).
+ Open protocol
+ Expand
7

Western Blot Analysis of Cell Signaling

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cells were collected and lysed with NP-40 lysis buffer with protease inhibitors. Lysates were analyzed for protein expression/phosphorylation as described previously [18, 19] . The following antibodies were used at the indicated dilutions; all antibodies were purchased from Cell Signaling: anti-p-AKT-S473 (1:1000, #4060), anti-AKT (1:1000, #4685), anti-p-p44/42 MAPK (Erk1/2) -Thr202/Tyr204 (1:1000, #4370), anti-p44/42 MAPK (Erk1/2) (1:1000, #4695), anti-p-p38 MAPK-Thr180/Tyr182 (1:1000, #9211), anti-p38 MAPK (1:1000, #8690), anti-p-cdc2-Tyr15 (1:1000, #4539), anti-cdc2 (1:1000, #9116), anti-p-CDC25C-Ser216 (1:1000, #4901), anti-cdc25C(1:1000, #4688), anti-p-Histone H3-ser10 (1:1000, #53348).
Loading [MathJax]/jax/output/CommonHTML/fonts/TeX/fontdata.js
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!