The largest database of trusted experimental protocols

25 protocols using ret 3

1

Thermoneutral Acclimation and Cold Exposure

Check if the same lab product or an alternative is used in the 5 most similar protocols
Mice were pre-acclimated at thermoneutrality (28-30°C) for 1wk and then shifted to 4°C. Body temperature was measured with a rectal probe (Physitemp, RET3) and a reader (Physitemp, BAT-12) and implanted temperature probes (Bio Medic Data Systems, IPTT-300) with a transponder (Bio Medic Data Systems, DAS-7007R)34 ,35 .
+ Open protocol
+ Expand
2

Measuring Mouse Temperature and Drug Discrimination

Check if the same lab product or an alternative is used in the 5 most similar protocols
Temperature was measured by inserting a probe (RET-3) (Physitemp Instruments, Inc., Clifton, NJ) attached to a microcomputer thermometer (7001H) (Physitemp Instruments, Inc., Clifton, NJ) 2 cm into the rectum. For drug discrimination, mice were placed in ventilated, sound-attenuating mouse operant chambers (MedAssociates, St. Albans, VT) with a house light located in the ceiling. On one wall were three holes spaced 5.5 cm apart (2.2 cm diameter each); each hole contained a photo beam and a light, and the center of each hole was 1.6 cm from the floor. In the center of the opposite wall was a fourth hole (also 2.2 cm diameter, center 1.6 cm from the floor) containing a dipper containing 0.01 cm3 condensed milk. An interface (MED-SYST-8, MedAssociates) connected the operant chambers to a computer running Med-PC software (MedAssociates), which controlled and recorded all experimental events.
+ Open protocol
+ Expand
3

Measuring Mouse Body Temperature

Check if the same lab product or an alternative is used in the 5 most similar protocols
Mice were either housed at room temperature or pre-acclimatized at thermoneutrality (28–30 °C) for 1 week before being shifted to 4°C. Body temperature was measured with and a microprobe thermometer (Physitemp, BAT-12) equipped with a rectal probe (Physitemp, RET3).
+ Open protocol
+ Expand
4

Measuring Mouse Thermoregulation

Check if the same lab product or an alternative is used in the 5 most similar protocols
Temperatures were taken 3 times during the light period (~10:00, 13:00 and 16:00) rectally using a probe (Physitemp RET-3) attached to a thermometer (Physitemp BAT-12) [43 (link)]. Mean temperatures for individual mice were then averaged by genotype. To test effects of cold, mice were housed individually at 4°C for 24 h under standard light/dark conditions [44 (link)].
+ Open protocol
+ Expand
5

Thermoneutral Acclimation and Cold Exposure

Check if the same lab product or an alternative is used in the 5 most similar protocols
Mice were pre-acclimated at thermoneutrality (28-30°C) for 1wk and then shifted to 4°C. Body temperature was measured with a rectal probe (Physitemp, RET3) and a reader (Physitemp, BAT-12) and implanted temperature probes (Bio Medic Data Systems, IPTT-300) with a transponder (Bio Medic Data Systems, DAS-7007R)34 ,35 .
+ Open protocol
+ Expand
6

Cold Exposure Impacts Marrow Adiposity

Check if the same lab product or an alternative is used in the 5 most similar protocols
At 8 or 52 weeks of age, 10 male C3H/HeJ (Jackson Labs, Stock: 000659) mice were placed individually into pre-cooled cages with bedding, food, and water, in a room held at 18°C. Littermate control mice (n = 10/strain) were held in identical conditions at room temperature (~22°C). After 1 week at 18°C, the cold room was adjusted to 4°C and maintained at this temperature for an additional 3 weeks. Control mice were held at 22°C for a total of 4 weeks (concurrently). Rectal core body temperature of control and cold-exposed mice was monitored daily using a Type T thermocouple rectal probe (RET-3, Physitemp Instruments, Inc., Clifton, NJ, USA) with a MicroTherma 2T hand held thermometer (ThermoWorks, Inc., Lindon, UT; Cat: THS-227-193). After 4 weeks, all mice were sacrificed and tissues were collected for analysis. Given the length of the intervention (21 days), we pre-scanned the non-decalcified tibia bones to calculate the marrow volume. After decalcification and osmium stain, the bones were re-scanned and the MAT volume was normalized to marrow volume in each region of interest to correct for any changes in the size of the tibiae between groups.
+ Open protocol
+ Expand
7

Mice Acclimation to Cold Exposure

Check if the same lab product or an alternative is used in the 5 most similar protocols
Mice were pre-acclimated at thermoneutrality (28–30°C) for two weeks and then shifted to 4°C. Body temperature was measured with a rectal probe (Physitemp, RET3) and a reader (Physitemp, BAT-12).
+ Open protocol
+ Expand
8

Indirect Calorimetry and Activity Monitoring in Obese Mice

Check if the same lab product or an alternative is used in the 5 most similar protocols
VO2 was measured using an indirect calorimetry system (Oxymax, Colombus Instrument OH) as described previosuly21 (link). HFD-induced obese mice were individually placed in the small acryl calorimeter chamber with free access to HFD and water from experiment day 12 to the end of experiment. After 12 h of adaptation, VO2 was estimated in individual mouse for 1 min at a 15-min interval over a 24 h period at airflow of 0.71/min. VO2 values were shown as ml/h/mouse. Locomotor activity of each mouse was monitored as numbers of infrared beam broken in both X and Y directions using an activity monitoring system (ATIMO-100 N, Shinfactory, Fukuoka, Japan). Rectal body temperature was measured using a thermometer (BAT-12R and RET-3, Physitemp).
+ Open protocol
+ Expand
9

Cold Tolerance Assay in Mice

Check if the same lab product or an alternative is used in the 5 most similar protocols
Mice were acclimatized at 30 °C for 4 weeks. The mice were then housed individually and acutely exposed to cold (4 °C). Rectal temperature was measured hourly using a digital thermometer (MicroTherma 2 T, Thermoworks) and a rectal probe (RET-3, Physitemp) for up to 8 hours. The end point was a 10 °C drop in temperature (approximately 27 °C) and mice were immediately euthanized.
+ Open protocol
+ Expand
10

Mouse Rectal Temperature Measurement

Check if the same lab product or an alternative is used in the 5 most similar protocols
Mouse body temperature was measured between 9 and 11 a.m. Rectal temperature was measured with a digital thermometer (BAT‐12, Physitemp Instruments Inc., Clifton, NJ) equipped with a rectal probe (RET‐3, Physitemp Instruments Inc.) inserted to a depth of approximately 1.5 cm. The mice were lightly restrained during the insertion of the probe. To reduce methodological stress, mice were sufficiently acclimated to the procedure before the test period. All measurements were recorded when rectal temperature reading reached a plateau.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!