The largest database of trusted experimental protocols

18 protocols using sc 764

1

Protein Extraction and Immunoblotting Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Scraped mucosa was homogenized in tissue lysis buffer containing 20 mM Tris (pH 8); 0.15 M NaCl; 2 mM EDTA; 1 mM sodium vanadate; 0.1 M sodium fluoride; 50 mM β-glycerophosphate; 5% glycerol, 2x protease inhibitor (Roche Applied Science); 1% Triton; and 0.1% SDS. Homogenate (60 μg protein) were resolved by 10% SDS-PAGE, transferred to PVDF membrane, and probed with mouse anti-HuR antibody (3A2)(Sc5261 Santa Cruz Biotechnology Inc.), mouse anti-Cyclin D1 (Mouse MAb, NeoMarkers, Fremont, CA), rabbit anti-C-Myc (Sc-764, Santa Cruz Biotechnology Inc.), rabbit anti-OLFM4 (ab96280 Abcam Inc.) and a rabbit anti-β-catenin antibody (9582, Cell Signaling Technology). Equal loading was verified using a rabbit anti-α actin antibody (A2066, Sigma-Aldrich) or rabbit anti-Hsp40 (SPA-400, Assay designs).
+ Open protocol
+ Expand
2

ChIP-qPCR Analysis of c-Myc Binding

Check if the same lab product or an alternative is used in the 5 most similar protocols
A ChIP assay was conducted to assess the binding of c-Myc to its target DNA in a manner similar to that described in previous reports19 (link). A rabbit polyclonal antibody against c-Myc (Santa Cruz, sc-764) was used for this assay. The primer sequences used for the ChIP‒qPCR assay are presented in Supplementary Table 5, and three replicates were analyzed in each assay.
+ Open protocol
+ Expand
3

Western Blot Analysis of Protein Extracts

Check if the same lab product or an alternative is used in the 5 most similar protocols
Total protein extracts were prepared using a lysis buffer (50 mM Tris, 2% SDS, 10% glycerol, 0.74 M beta-mercaptoethanol), sonicated on ice using a Sonifier 250D (Branson Ultrasonics), and heated for 5 min at 99 °C. Protein concentrations were determined with the Bio-Rad DC Protein Assay Kit (BioRad) using bovine serum albumin as a standard. Protein extracts were separated in 10% SDS-PAGE and electrotransferred to PVDF membranes (Immobilon-P; EMD Millipore). Antibodies used were as follows: MYC #ab32 (Abcam, Cambridge, USA) [56 (link)], #sc764 (Santa Cruz Biotechnology, USA) [57 (link)]; DNMT3B #ab122932 (Abcam, Cambridge, USA) [58 (link)],#nb100-56514 (Novus Biologicals, USA) [59 (link)]; TUBULIN #ab6046 (Abcam, Cambridge, USA) [22 (link)]; β-ACTIN #A5441 (Sigma-Aldrich, USA); GAPDH #sc25778 (Santa Cruz Biotechnology, USA) [60 (link)]; Anti-MOUSE HRP #31430 (Thermo Fisher, USA) [61 (link)]; Anti-RABBIT HRP #31460 (Thermo Fisher, USA) [62 (link)]. Protein quantitation was performed using ImageJ software (https://imagej.nih.gov/ij/) [63 (link)].
+ Open protocol
+ Expand
4

Protein Expression Analysis by Western Blot

Check if the same lab product or an alternative is used in the 5 most similar protocols
Western blot was performed using standard procedures. Antibodies against Myc (sc-764, Santa Cruz), and Gapdh (5174, Cell Signaling) were used.
+ Open protocol
+ Expand
5

Immunohistochemical Profiling of Metastatic LUAD

Check if the same lab product or an alternative is used in the 5 most similar protocols
IHC assays were performed to detect the expression of ALPL, p-ERK, c-Myc and RhoA in formalin-fixed paraffin-embedded metastatic lung tumor tissues of mice injected with LUAD cells. Specific antibodies against ALPL (GTTX100817, Genetex), p-ERK1/2 (4370S, CST), c-Myc (sc-764, Santa Cruz) and RhoA (sc-418, Santa Cruz) were used for IHC staining, which were performed using a kit from Boster Bio-Engineering Company (SA1022; Wuhan, China).  Immunostained images were captured with the Nikon Eclipse Ni microsystem (DS-Ri2) and analyzed with Image-Pro Plus version 6.0 (Media Cybernetics, Rockville, MD, USA) by calculating the integrated optical density (IOD) of each stained area (IOD/area). At least five images per specimen were counted.
+ Open protocol
+ Expand
6

Western Blot Protein Analysis Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Total protein extracts were prepared using a lysis buffer (50 mM Tris, 2% SDS, 10% glycerol, 0.74 M beta-mercaptoethanol), sonicated on ice using a Sonifier 250D (Branson Ultrasonics, St. Louis MO, USA), and heated for 5 min at 99 °C. Protein concentrations were determined with the Bio-Rad DC Protein Assay Kit (BioRad, Hercules, CA, USA) using bovine serum albumin as a standard. Protein extracts were separated in 10% SDS-PAGE, electrotransferred to PVDF membranes (Immobilon-P; EMD Millipore, Burlington, MA, USA). Antibodies used are: HSP90 antibody [H90-10] #ab53497, MYC #ab32 (Abcam, Cambridge, UK) [36 (link)], #sc764 (Santa Cruz Biotechnology, Dallas, TX, USA) [37 (link)]; TUBULIN #ab6046 (Abcam, Cambridge, UK) [38 (link)]; Anti-MOUSE HRP #31430 (Thermo Fisher, Waltham, MA, USA) [39 (link)]; Anti-RABBIT HRP #31460 (Thermo Fisher, Waltham, MA, USA) [40 (link)].
+ Open protocol
+ Expand
7

ChIP Assay for Human CML BC Cells

Check if the same lab product or an alternative is used in the 5 most similar protocols
ChIP was performed on human CML BC cells harvested 24–48 h after treatment as previously described (Dawson et al., 2011 (link)). In brief, 107 cells were fixed in 1% formaldehyde for 15 min at room temperature. The cross-linking reaction was stopped by addition of glycine (0.125 M final concentration) and additional incubation of 10 min. Cells were washed in PBS and cell pellets were lysed in lysis buffer (1% SDS, 10 mM EDTA, 50 mM Tris-HCl, pH 8.0, and 1 mM sodium orthovanadate and protease inhibitors). Chromatin was sonicated in a Bioruptor (Diagenode) sonicator and precleared for 1 h before immunoprecipitation in equal volumes of protein A and G beads (Dynabeads; Life Technologies). Immunoprecipitation was performed at 4°C overnight in modified RIPA buffer (1% Triton X-100, 0.1% deoxycholate, 0.1% SDS, 90 mM NaCl, 10 mM Tris-HCl pH 8.0, 1 mM sodium orthovanadate, and EDTA-free protease inhibitors) in the presence 2.5 µg of IgG (I5006; Sigma-Aldrich) or c-Myc (sc-764; Santa Cruz Biotechnology) antibodies and A/G beads. DNA was subsequently RNase treated, reverse cross-linked, and purified using QIAquick PCR purification kit (QIAGEN). ChIP-PCR was performed with SYBR Green PCR mastermix using the ABI Prism 7000 system (Applied Biosystems). The primers used can be found in Table S6.
+ Open protocol
+ Expand
8

Antibody Guide for Cell Research

Check if the same lab product or an alternative is used in the 5 most similar protocols
The antibodies used in western blotting, Co-IP and immunofluorescence staining are as follows: anti-QRICH2 (1:200, sc-514279, Santa Cruz Biotechnology), anti-QRICH2 (1:50, HPA052219, Sigma-Aldrich) for immunofluorescence staining of mice sample, anti-QRICH2 (1:50, HPA021935, Sigma-Aldrich) for immunofluorescence staining of human sample, anti-AKAP3 (1:100, provided by Prof. Huayu Qi) for immunofluorescence staining, anti-AKAP3 (1:100, 13907-1-AP, Proteintech) for Co-IP, anti-ODF2 (1:500, 12058-1-AP, Proteintech), anti-CABYR (1:500, 12351-1-AP, Proteintech), anti-ROPN1 (1:200, sc-130455, Santa Cruz Biotechnology), MARCH10 (1:500, bs-10732R, Bioss), anti-TSSK4 (1:400, A7861, ABclonal), anti-ubiquitin (1:1000, ab7780, Abcam), anti-Flag Tag (1:500, 66008-2-Ig, Proteintech), anti-Myc Tag (1:1000, sc-764, Santa Cruz Biotechnology), anti-α-Tubulin (1:2000, T7451, Sigma-Aldrich) and anti-GAPDH (1:5000, ab8245, Abcam). Anti-AKAP3 mouse monoclonal antibody for western blotting was kindly provided by Prof. Huayu Qi. Anti-TSSK4 rabbit polyclonal antibody for Co-IP was kindly provided by Prof. Long Yu.
+ Open protocol
+ Expand
9

ChIP Assay for c-Myc Binding

Check if the same lab product or an alternative is used in the 5 most similar protocols
ChIP assays were performed using the ChIP-IT High Sensitivity Kit (catalogue # 53040, Active Motif) or the EZ ChIP Kit (catalogue # 17–371,EMD Millipore) according to the manufacturer's protocol. Briefly, mIMCD3 cells or mouse kidney tissue were crosslinked with 1% formaldehyde for 15 min at room temperature, homogenized into a single-cell suspension and chromatin samples were extracted from the nuclei and sonicated. Immunoprecipitation was performed with 5 μg of rabbit anti-Myc (sc-764; Santa Cruz Biotechnology) and rabbit IgG (sc-2027; Santa Cruz Biotechnology) antibody as a negative control. Genomic DNA was purified and amplified using the following primer set: forward 5′-AGGGCTCGTGGTTCTTAGGT-3′ and reverse 5′-GAAAAAGGGCAACCAGGACT-3′. This primer set amplifies a c-Myc binding site, which is ∼483 bp upstream of the transcription start site of the mouse miR-17∼92 cluster. Enrichment of c-Myc binding to the mir-17 site was compared with the Input DNA (10%). The PCR product (145 bp) was visualized on a 2% agarose gel.
+ Open protocol
+ Expand
10

Immunohistochemical Analysis of Tissue Samples

Check if the same lab product or an alternative is used in the 5 most similar protocols
The IHC analysis was carried out using Histostain-Plus IHC Kit (Thermo Fisher Scientific)49 (link). Paraffin-embedded tissue sections were incubated with the antibodies against CD45 (1:100, 13–9457, eBioscience), SHQ1 (1:100, ab110692, Abcam), c-Myc (1:200, sc-764, Santa Cruz), or PCNA (1:200, sc-56, Santa Cruz) overnight at 4 °C. These slides were then subjected to horseradish peroxidase-linked secondary antibodies for 1 h at room temperature. Staining was visualized by the DAB substrate kit (Vector Labs) and representative areas of each stained tissue section were imaged at ×400 magnification. ImageJ software was used to quantify the staining results.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!