Tetrahydrofuran thf

Manufactured by Biosolve

Tetrahydrofuran (THF) is a colorless, volatile, and flammable cyclic ether. It is a widely used organic solvent and an important chemical intermediate in various industrial processes.

Automatically generated - may contain errors

Lab products found in correlation

Close spelling variants of this product

Absolute tetrahydrofuran(THF) Tetrahydrofuran

5 protocols using tetrahydrofuran thf

Fabrication of Hybrid Protein-Polymer Materials

Check if the same lab product or an alternative is used in the 5 most similar protocols

Styrene (STY, >99.5%), divinylbenzene (DVB,
80%), 3-(trimethoxysilyl)propyl methacrylate (γ-MAPS, 98%),
2,2′-azobis(isobutyronitrile) (AIBN, 98%), n-decanol (99%), sodium hydroxide (NaOH), aluminum oxide, lysozyme
from chicken egg white (Lys), carbonic anhydrase from bovine heart
(CA, >90%), cytochrome c from equine heart (CC, >95%), bovine
casein
(Cas), and potassium iodide (KI, >99%) were purchased from Sigma-Aldrich
(St. Louis, Missouri, United States). Ethanol (EtOH), methanol (MeOH),
acetonitrile (ACN), and tetrahydrofuran (THF, >99.8) were purchased
from Biosolve (Valkenswaard, The Netherlands). Hydrochloric acid 37%
(HCl) and glacial acetic acid were obtained from Acros (Geel, Belgium).
Milli-Q water (18.2 MΩcm) was produced by a Sartorius Arium
611UV Ultrapure Water System (Göttingen, Germany). The titanium
devices were purchased from Materialise (Leuven, Belgium), while the
capillary (0.53 mm ID, 0.70 mm OD) was purchased from CMScientific
(Silsden, UK).

Passamonti M., Bremer I.L., Nawada S.H., Currivan S.A., Gargano A.F, & Schoenmakers P.J. (2019). Confinement of Monolithic Stationary Phases in Targeted Regions of 3D-Printed Titanium Devices Using Thermal Polymerization. Analytical Chemistry, 92(3), 2589-2596.

+ Open protocol

+ Expand

Photocurable Liquid Crystal Coatings

Check if the same lab product or an alternative is used in the 5 most similar protocols

LC monomers 4-[[[4-[(1-Oxo-2-propenyl)oxy]butoxy]carbonyl]oxy]benzoic
acid 2-methyl-1,4-phenylene ester (LC242) and 4-Methoxybenzoic acid
4-(6-acryloyloxy-hexyloxy)phenyl ester (C6BP) were acquired from BASF
and Synthon, respectively. Photoinitiator camphorquinone (CQ) was
purchased from ABCR. Co-initiator ethyl 4-(Dimethylamino)benzoate
(EDAB) and photoinhibitor 2,2′-Bis(2-chlorophenyl)-4,4′,5,5′-tetraphenyl-1,2′-biimidazole
(o-Cl-HABI) were obtained from TCI. Chiral dopant
benzoic acid, 4-hexyl-,4-[[(1-methylheptyl)oxy]carbonyl]phenyl ester
(ZLI-811), was acquired from Merck.
Coatings used for cell preparation
included OPTMER AL 1254 from JSR (planar alignment), Sunever 5661
from Nissan Chemical (homeotropic alignment), 3-(trimethoxysilyl)propyl
methacrylate (adhesive coating), and trimethoxy(octadecyl)silane (antiadhesive
coating) from Sigma-Aldrich.
The developer solution comprised
isopropyl alcohol (IPA) from Biosolve,
propylene glycol monomethyl ether acetate (PGMEA) from Aldrich, and
methyl isobutyl ketone (MIBK) from Acros Organics. Dichloromethane
(DCM) and tetrahydrofuran (THF) were purchased from Biosolve.

Gruzdenko A., Mulder D.J., Schenning A.P., den Toonder J.M, & Debije M.G. (2024). Dual-Wavelength Volumetric Microlithography for Rapid Production of 4D Microstructures. ACS Applied Materials & Interfaces, 16(17), 22696-22703.

+ Open protocol

+ Expand

Synthesis of Ferrocene-Containing Polymer

Check if the same lab product or an alternative is used in the 5 most similar protocols

Poly(ferrocenyl(3-iodopropyl)methylsilane)
(PFS-I, M_w = 3.12 × 10⁵ g/mol, M_n = 1.56 × 10⁵ g/mol, M_w/M_n = 2.0) was prepared according to established procedures.^{31 (link)} Dimethyl sulfoxide (DMSO) and tetrahydrofuran
(THF) were obtained from Biosolve. Tri-n-butylphosphine
(PBu₃), dimethylaminopropyl methacrylamide (DMAPMA), 1-hexylamine,
and multi-walled carbon nanotubes (MWCNTs, 6–13 nm × 2.5–20
μm) were obtained from Aldrich and used without further purification.
Polyethylene glycol-tetrathiol (4-arm PEG-thiol, pentaerythritol core, M_n = 5000 g mol^–1) was purchased
from JenKem Technology, USA. Sodium 1-pentanesulfonate (NaC₅S) and sodium 1-hexanesulfonate (NaC₆S) were supplied
by TCI, Belgium. Milli-Q water was used in all experiments.

Zhang K., Feng X., Ye C., Hempenius M.A, & Vancso G.J. (2017). Hydrogels with a Memory: Dual-Responsive, Organometallic Poly(ionic liquid)s with Hysteretic Volume-Phase Transition. Journal of the American Chemical Society, 139(29), 10029-10035.

+ Open protocol

+ Expand

Sunitinib-Loaded Polymeric Nanoparticles

Check if the same lab product or an alternative is used in the 5 most similar protocols

Sunitinib malate was obtained from LC laboratories, USA. Poly(vinyl alcohol) (PVA; M w 30,000-70,000; 88% hydrolyzed), Tween 20, stannous octoate and dimethyl sulfoxide (DMSO) were obtained from Sigma Aldrich, Germany. Dichloromethane (DCM), acetonitrile and tetrahydrofuran (THF) were purchased from Biosolve (Valkenswaard, The Netherlands). PEG1000, 1,4-butanediol and 1,4 dioxane were purchased from Acros (Geel, Belgium), 1,4butanediisocyanate was purchased from Bayer (Leverkusen, Germany) and DL-lactide and L-lactide were purchased from Corbion Purac (Gorinchem, The Netherlands). Polystyrene standards were purchased from Agilent technologies (Santa Clara, USA). Fertilized white Leghorn eggs were obtained from Het Anker company (Ochten, The Netherlands).

Ramazani F., Hiemstra C., Steendam R., Kazazi-Hyseni F., Van Nostrum C.F., Storm G., Kiessling F., Lammers T., Hennink W.E, & Kok R.J. (2015). Sunitinib microspheres based on [PDLLA-PEG-PDLLA]-b-PLLA multi-block copolymers for ocular drug delivery. European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V, 95(Pt B).

+ Open protocol

+ Expand

Formulation and Characterization of PLGA Microparticles

Check if the same lab product or an alternative is used in the 5 most similar protocols

PLGA (5004A: acid terminated with D,L-lactide/glycolide molar ratio 50:50, IV = 0.4 dl/g) was purchased from Purac, The Netherlands. Goserelin acetate was obtained from BCN (Barcelona, Spain). Polyvinyl alcohol (PVA; molecular weight 30,000-70,000; 88% hydrolyzed) was from Sigma-Aldrich, Inc., USA. Disodium hydrogen phosphate dihydrate (Na 2 HPO 4 Á2H 2 O) and sodium dihydrogen phosphate monohydrate (NaH 2 PO 4 ÁH 2 O) were obtained from Merck. Sodium azide (NaN 3 , Bio Ultra, P99.5%) was purchased from Sigma (Germany). HPLC and MS grade acetonitrile (ACN), peptide grade dichloromethane (DCM) and tetrahydrofuran (THF) were purchased from Biosolve (The Netherlands). Formic acid was purchased from Sigma-Aldrich Co (Zwijndrecht, the Netherlands).

Shirangi M., Hennink W.E., Somsen G.W, & van Nostrum C.F. (2016). Acylation of arginine in goserelin-loaded PLGA microspheres. European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V, 99.

+ Open protocol

+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Revolutionizing how scientists
search and build protocols!