Log In Sign up
The largest database of trusted experimental protocols

P25 tio2 nanoparticles

Manufactured by Evonik
Visit Supplier
Sourced in Germany

P25®-TiO2 nanoparticles are a type of titanium dioxide (TiO2) material produced by Evonik. They consist of a mixture of anatase and rutile crystal structures, with an average particle size of approximately 21 nanometers. This product is intended for use in various research and industrial applications.

Automatically generated - may contain errors

Lab products found in correlation

P vdf trfe, by Solvay (2 mentions) N n dimethylformamide (dmf), by Merck Group (2 mentions) Sulfuric acid h2so4, by Merck Group (1 mentions) Sodium hydroxide (naoh), by Merck Group (1 mentions) Sodium hydroxide (naoh), by Avantor (1 mentions) Chloroplatinic acid solution, by Merck Group (1 mentions) Nickel 2 chloride hexahydrate, by Merck Group (1 mentions) Trisodium citrate dihydrate, by Merck Group (1 mentions) Acetonitrile mecn, by Merck Group (1 mentions) Sodium borohydride, by Merck Group (1 mentions) Sodium bicarbonate, by Merck Group (1 mentions) Sodium carbonate, by Merck Group (1 mentions) Sodium chloride (nacl), by Merck Group (1 mentions) Nafion solution, by Merck Group (1 mentions) Melamine, by Merck Group (1 mentions) Hydrochloric acid (hcl), by Thermo Fisher Scientific (1 mentions)

4 protocols using p25 tio2 nanoparticles

1

Synthesis of PVDF-TrFE Nanocomposite

Check if the same lab product or an alternative is used in the 5 most similar protocols
PVDF–TrFE (70:30) was obtained from Solvay (Paris, France). P25®-TiO2 nanoparticles were provided by EVONIK (Essen, Germany). Sulfuric acid (H2SO4) 99%, sodium hydroxide (NaOH) 97%, N,N-dimethylformamide (DMF) 99%, and methylene (MB) were all purchased from Merck (Darmstadt, Germany).
Zioui D., Salazar H., Aoudjit L., Martins P.M, & Lanceros-Méndez S. (2019). Polymer-Based Membranes for Oily Wastewater Remediation. Polymers, 12(1), 42.
+ Open protocol
+ Expand
2

PVDF–TrFE Nanocomposite Fabrication

Check if the same lab product or an alternative is used in the 5 most similar protocols
PVDF–TrFE (70:30) was obtained from Solvay (Brussels, Belgium). P25®-TiO2 nanoparticles was kindly supplied by EVONIK (Essen, Germany). MB and N,N-dimethylformamide (DMF) 99% were supplied by Merck. CIP 98% and IBP 98% were obtained from Sigma-Aldrich (Darmstadt, Germany). NaOH 97% was obtained from VWR (Radnor, PA, USA). Milli-Q ultrapure water was used in all experiments.
Martins P.M., Ribeiro J.M., Teixeira S., Petrovykh D.Y., Cuniberti G., Pereira L, & Lanceros-Méndez S. (2019). Photocatalytic Microporous Membrane against the Increasing Problem of Water Emerging Pollutants. Materials, 12(10), 1649.
+ Open protocol
+ Expand
3

Synthesis and Characterization of TiO2 Nanoparticle Catalysts

Check if the same lab product or an alternative is used in the 5 most similar protocols
P25 TiO2 nanoparticles (21 nm,
Evonik), chloroplatinic acid solution (H2PtCl6, 8% v/v, Sigma-Aldrich), trisodium citrate dihydrate (Sigma-Aldrich),
sodium borohydride (NaBH4, 99%, Sigma-Aldrich), melamine
(99%, Sigma-Aldrich), nickel(II) chloride hexahydrate (NiCl2·6H2O, 99.9%, Sigma-Aldrich), sodium hypophosphite
monohydrate (NaH2PO2·H2O, Fischer
Scientific), Nafion solution (5 wt %, Sigma-Aldrich), sodium carbonate
(Na2CO3, 99.9%, Sigma-Aldrich), sodium bicarbonate
(NaHCO3, 99.9%, Sigma-Aldrich), sodium chloride (NaCl,
99.9%, Sigma-Aldrich), acetonitrile (MeCN, Sigma-Aldrich), 13C-sodium bicarbonate (NaH13CO3, 99.9%, Sigma-Aldrich),
PET film (Goodfellow, ES30-FM-000125), CO2 with 2% CH4 (BOC), N2 with 2% CH4 (BOC), and 13CO2 (Sigma-Aldrich).
Bhattacharjee S., Guo C., Lam E., Holstein J.M., Rangel Pereira M., Pichler C.M., Pornrungroj C., Rahaman M., Uekert T., Hollfelder F, & Reisner E. (2023). Chemoenzymatic Photoreforming: A Sustainable Approach for Solar Fuel Generation from Plastic Feedstocks. Journal of the American Chemical Society, 145(37), 20355-20364.
+ Open protocol
+ Expand
4

PLA-TiO2 Nanocomposite Photocatalysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
The key materials used in this study were polylactic acid, PLA, pellets (3DQF, Leigh, UK), P25 TiO 2 nanoparticles (Evonik Industries, Essen, Germany), methylene blue, MB, (Merk Life Science UK Ltd., Gillingham, UK), phenol (Merk Life Science UK Ltd., Gillingham, UK) and HCl (Fisher Scientific, Hampton, USA). All aqueous solutions were made up using doubly distilled, de-ionised water.
Zhou R., Han R., Bingham M., O'Rourke C, & Mills A. (2022). 3D printed, plastic photocatalytic flow reactors for water purification. Photochemical & photobiological sciences : Official journal of the European Photochemistry Association and the European Society for Photobiology, 21(9).
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!