Fluorinert fc 43

Manufactured by 3M

Sourced in France

Fluorinert FC-43 is a fully fluorinated, thermally and chemically stable liquid produced by 3M. It is designed for use as a coolant, heat transfer medium, and dielectric fluid in specialized laboratory equipment and applications.

Automatically generated - may contain errors

Lab products found in correlation

Inverted microscope, by Nikon (1 mentions) Pico plus syringe pump, by Harvard Apparatus (1 mentions) Polyvinyl alcohol (pva), by Merck Group (1 mentions) Sylgard 184, by Dow (1 mentions) Dimethyl carbonate, by Merck Group (1 mentions) Teflon af, by DuPont (1 mentions)

Spelling variants of this product

Fluorinert (26 citations) FC-43 (5 citations)

5 protocols using fluorinert fc 43

Wheat Infection by Powdery Mildew

Check if the same lab product or an alternative is used in the 5 most similar protocols

Twelve-day-old wheat plantlets were inoculated with 5 mL of a suspension of Bgt spores (500 000 spores/mL in Fluorinert FC43, heptacosafluorotributhylamine 3M, Cergy-Pontoise, France) with a sprayer (ITW Surfaces et Finitions, Valence, France).
Mock-infected plants were sprayed with 5 mL of Fluorinert FC43 (heptacosafluorotributhylamine 3M, Cergy-Pontoise, France). Twelve days after inoculation, the symptoms were checked through the development of white colonies on the first leaf, what confirms the successful infection of plantlets by Bgt.

Allario T., Fourquez A., Magnin-Robert M., Siah A., Maia-Grondard A., Gaucher M., Brisset M.N., Hugueney P., Reignault P., Baltenweck R, & Randoux B. (2023). Analysis of Defense-Related Gene Expression and Leaf Metabolome in Wheat During the Early Infection Stages of Blumeria graminis f. sp. tritici. Phytopathology, 113(8).

+ Open protocol

+ Expand

Membrane Pore Size Characterization

Check if the same lab product or an alternative is used in the 5 most similar protocols

The membrane pore size distribution was characterized
by using a Porolux 500 capillary flow porometer (IB-FT GmbH, Berlin,
Germany) for the symmetric porous membranes. Before each measurement,
the membranes (ϕ 25 mm) were immersed for 15 min in perfluorotributylamine
(Fluorinert FC-43, 3M Belgium). Measurements were performed from 0.1
to 6.0 bar of applied nitrogen pressure. Reported values for mean
pore size are the average of at least two measurements with the standard
deviation of the repeats used for the error bars.

Willott J.D., Nielen W.M, & de Vos W.M. (2019). Stimuli-Responsive Membranes through Sustainable Aqueous Phase Separation. ACS Applied Polymer Materials, 2(2), 659-667.

+ Open protocol

+ Expand

Microfluidic PLGA Particle Synthesis

Check if the same lab product or an alternative is used in the 5 most similar protocols

Poly(d,l lactic-co-glycolic acid) (PLGA, 38,000–54,000, 50:50 lactic acid: glycolic acid, acid terminated; SIGMA); Polyvinyl alcohol (PVA, average 30,000–70,000 mw, 87–90% hydrolyzed, Sigma Aldrich); High-speed FASTCAM camera (PCI-10K, Photron LTd.); high-speed Phantom monochrome camera (V310, Vision Research); Inverted microscope (Nikon); Plastic 1 ml Luer Norm-Ject syringes (Henke Sass Wolf); Glass 250 µl–1 ml Hamilton gastight instrument syringes (Hamilton); Pico Plus Syringe pumps (Harvard Apparatus); Teflon (PTFE) tubing (wall thickness 0.012, AWG 20, ICO Rally); PDMS (poly(dimethyl) siloxane, Sylgard 184, Dow Corning), Teflon AF (DuPont); Fluorinert FC-43 (3M); Biopsy punches (Integra Miltex); Air plasma chamber (Harrick Scientific); Dimethyl Carbonate (DMC, anhydrous 99%, SIGMA), PBS (Phosphate Buffered Saline, pH 7.4, without Calcium or Magnesium, Lonza).

Rapier C.E., Shea K.J, & Lee A.P. (2021). Investigating PLGA microparticle swelling behavior reveals an interplay of expansive intermolecular forces. Scientific Reports, 11, 14512.

+ Open protocol

+ Expand

Porous Rock Core Flow Characterization

Check if the same lab product or an alternative is used in the 5 most similar protocols

Brown"; Kocurek Industries Inc.), of diameter and length 38.1 mm (1.5 in) and 6 cm, respectively, was used. The total porosity, determined gravimetrically by imbibition of deionised water by vacuum saturation was 37.6 ± 0.4%. The core was then placed in a cylindrical Ergotech PEEK rock core flow cell and a confining pressure of 2 MPa was applied using 3M Fluorinert FC-43, which is NMR silent in typical 1 H chemical shift ranges. The cell was contained in a closed-loop system with a backpressure regulator, and the confining pressure was maintained using a Gilson model 307 pump. A constant flow rate of water of 10 mL min -1 was imposed using a Quizix QX-1500HC dual-cylinder syringe pump.

de Kort D.W., Hertel S.A., Appel M., de Jong H., Mantle M.D., Sederman A.J, & Gladden L.F. (2019). Under-sampling and compressed sensing of 3D spatially-resolved displacement propagators in porous media using APGSTE-RARE MRI. Magnetic resonance imaging, 56.

+ Open protocol

+ Expand

Heterogeneous Carbonate Imbibition Experiment

Check if the same lab product or an alternative is used in the 5 most similar protocols

A cylindrical plug from a vuggy, heterogeneous carbonate outcrop rock of 38.0 mm diameter and 59.7 mm length and an overall porosity of 19.1% was imbibed with deionised water through vacuum saturation. The core was then placed in a cylindrical Ergotech PEEK rock core flow cell. A confining pressure was applied using 3M Fluorinert FC-43, which is NMR silent in typical 1 H chemical shift ranges. The flow cell was connected into a closed flow loop, and a constant flow rate of water of 10 mL min -1 was imposed using a Quizix QX-1500 HC dual-cylinder syringe pump.

de Kort D.W., Reci A., Ramskill N.P., Appel M., de Jong H., Mantle M.D., Sederman A.J, & Gladden L.F. (2018). Acquisition of spatially-resolved displacement propagators using compressed sensing APGSTE-RARE MRI. Journal of magnetic resonance (San Diego, Calif. : 1997), 295.

+ Open protocol

+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Revolutionizing how scientists
search and build protocols!