The largest database of trusted experimental protocols

Anti p smad3

Manufactured by Santa Cruz Biotechnology
Sourced in United States

Anti-p-Smad3 is a primary antibody that recognizes the phosphorylated form of Smad3, a key downstream effector of the transforming growth factor-beta (TGF-β) signaling pathway. This antibody is suitable for applications such as Western blotting and immunohistochemistry.

Automatically generated - may contain errors

6 protocols using anti p smad3

1

Quantitative Western Blot Analysis of TGF-β Signaling

Check if the same lab product or an alternative is used in the 5 most similar protocols
ESCs and endometrial tissues were first lysed with lysis buffer and centrifuged at 12,000 × g for 15 min at 4°C. A BCA protein assay kit (Beyotime) was used to determine the quantity of protein. Protein samples (50 μg) were separated with SDS-PAGE and transferred to polyvinylidene fluoride (PVDF) membranes. The PVDF membranes were blocked with 5% nonfat milk in TBST (10 mM Tris-HCl, 100 mM NaCl, 0.1% Tween-20, pH 7.4) for an hour at room temperature and then incubated in primary antibody overnight at 4°C. The primary antibodies used in this study were rabbit anti-β-actin (1 : 2500, control), anti-TGF-b1 (1 : 1000), anti-p-Smad2 (1 : 500), anti-Smad2 (1 : 1000), anti-p-Smad3 (1 : 1000), anti-Smad3 (1 : 500), anti-Smad4 (1 : 200), and anti-Smad7 (1 : 500) all from Santa Cruz Biotechnology. Membranes were then incubated with horseradish peroxidase-labeled goat anti-rabbit secondary antibody (1 : 10,000) for an hour at room temperature. Protein bands were visualized using Luminata Crescendo Western HRP Substrate (Millipore, Billerica, MA, USA) and a molecular imager (Bio-Rad, Philadelphia, PA, USA). Densitometry analysis was determined relative to β-actin using 1-D Analysis Software (National Institutes of Health, USA).
+ Open protocol
+ Expand
2

Western Blot Analysis of TMEM88, Smad2/3 Signaling

Check if the same lab product or an alternative is used in the 5 most similar protocols
Tissues or cells were homogenized and lysed using RIPA lysis buffer (Beyotime, Nantong, China). Equal amount of protein was separated on 10% sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) and electrotransferred to a nitrocellulose membrane (Millipore). The membranes were blocked with 5% defatted milk in TBST buffer at room temperature for 1 h, and then incubated with primary antibodies overnight at 4 °C. The primary antibodies were anti-TMEM88, anti-p-Smad2, anti-Smad2, anti-p-Smad3, anti-Smad3 and anti-GAPDH (Santa Cruz Biotechnology, Santa Cruz, CA, USA). Membranes were washed and incubated with horseradish peroxidase (HRP)-conjugated secondary antibodies at room temperature for 1 h. Finally, the antigen–antibody complexes were determined using an enhanced chemiluminescence (Gibco, Rockville, MD). The absorbance values of the target proteins were performed through Gel-Pro Analyzer version 4.0 software (Media Cybernetics, Silver Spring, MD, USA).
+ Open protocol
+ Expand
3

Western Blot Analysis of BRCA1, TGF-β1, and Smad3

Check if the same lab product or an alternative is used in the 5 most similar protocols
Protein from cells or tissues was extracted standardization with a BCA kit (Pierce, Rockford, IL, USA). Then, protein samples (40 μg) were used for sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) and transferred to polyvinylidene difluoride (PVDF) membranes. The PVDF membranes were then incubated with the following primary antibodies after blocking in 5% nonfat milk: anti-BRCA1 (1:600), anti-p-Smad3 (1:800), anti-Smad3 (1:800), anti-TGF-β1 (1:1000) and anti-β-actin (1:1000) (Santa Cruz Biotechnology, Santa Cruz, CA, USA). The membranes were then incubated with secondary antibodies (Santa Cruz Biotechnology) for 1 h at room temperature before the chemiluminescence was measured. The Quantity One program (Bio-Rad, Hercules, CA, USA) was used to measure the intensity of the protein bands.
+ Open protocol
+ Expand
4

Orbital Fibroblast Protein Expression Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Orbital fibroblasts (5×105/well) were seeded in six-well plates, and the proteins from the cells were extracted using RIPA lysis buffer (Beyotime, Nantong, China). For western blotting, equal amounts of proteins were separated with sodium dodecyl sulfate–polyacrylamide gel electrophoresis (SDS–PAGE) and blotted onto a prewetted nitrocellulose membrane (GE Healthcare, Munich, Germany), followed by blocking of the membranes in 10% defatted milk in 0.2 M phosphate buffer saline (PBS; 1X; 32 mM NaH2PO4, 168 mM Na2HPO4, pH=7.5) at 4 °C for 4 h. The membranes were then probed with different primary antibodies. The following primary antibodies were used: mouse anti-ki67 (1:1,000), anti-Bcl-2 (1:1,000), anti-Bax (1:1,000), anti-α-SMA (1:1,000), anti-p-Smad3 (1:1,000), anti-Smad3 (1:1,000), and anti-β-actin monoclonal antibody (1:1,000; Santa Cruz Biotechnology, Santa Cruz, CA). After extensive washing with Tris Buffered Saline Tween-20 (TBST; 25 mM Tris, 150 mM NaCl, 0.05% Tween-20, pH=7.5 ), the membranes were incubated for 1 h at 25 °C with horseradish peroxidase (HRP)-conjugated secondary antibody (1:2,000; KangChen Bio-tech, Shanghai, China). Specific bands were visualized using enhanced chemiluminescence (ECL) reagent (Beyotime). Luminance was scanned using a Typhoon scanner (Amersham Biosciences, Piscataway, NJ). All experiments were performed in triplicate.
+ Open protocol
+ Expand
5

Idazoxan and TGF-β Modulate Liver Fibrosis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Idazoxan (IDA) and transforming growth factor-β (TGF-β) were purchased from Sigma-Aldrich (St. Louis, MO, USA). Carbon tetrachloride (CCl4) was purchased from Xilong Chemistry Plant (Shantou, China). Perifosine (PE), anti-Nrf2, anti-HO-1, anti-α-SMA and anti-Col1 were purchased from Abcam (Cambridge, UK). Anti-NQO1, anti-Smad2, anti-phospho-Smad2, anti-Smad3, anti-p-Smad3, anti-keap1, anti-GAPDH, anti-PCNA, anti-SOD2, anti-Catalase, anti-p38, anti-p-p38, anti-Akt and anti-p-Akt were obtained from Santa Cruz (CA, USA). IL-1β, IL-6, TNF-α and TGF-β enzyme-linked immunosorbent assay (ELISA) kits were obtained from Boster Biotechnology (Wuhan, China). Reactive Oxygen Species Assay Kit, BCA Protein Assay Kit, Nuclear and Cytoplasmic Extraction kits, Total Superoxide Dismutases Assay Kit, glutathione perosidase (GPx) Assay Kit and Catalase Assay Kit were purchased from Beyotime Biotechnology (Shanghai, China).
+ Open protocol
+ Expand
6

Protein Extraction and Western Blot Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cells were lysed in lysis buffer containing 15 mM Tris/HCl pH 7.5, 120 mM NaCl, 25 mM KCl, 1 mM EDTA, 0.5% Triton 100 containing proteinase and phosphatase inhibitor cocktails (Sigma-Aldrich) at 4 °C for 40 min. Following centrifugation, the cell lysates were collected using 1 mL RIPA (Solarbio, Beijing, China) with 10 μL PMSF. Protein concentration was determined by BCA assay.
Protein lysates (50 µg) were resolved on 4–12% Novex Bis-Tris SDS-acrylamide gels (Invitrogen) and electrotransferred on Nitrocellulose membrane (Bio-Rad). The primary antibodies used in this study were anti- Smad3,anti-pSmad3, anti-TGFβR2 and anti-actin (Santa Cruz Biotechnology, Shanghai, China).
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!