The largest database of trusted experimental protocols

Sterile 1 mm glass beads

Manufactured by Biospec
Sourced in United States

Sterile 1-mm glass beads are spherical particles made of high-quality glass with a diameter of 1 millimeter. They are designed for various laboratory applications that require small, uniform, and sterile solid objects.

Automatically generated - may contain errors

8 protocols using sterile 1 mm glass beads

1

Quantifying Bacterial Growth in Experimental Endophthalmitis

Check if the same lab product or an alternative is used in the 5 most similar protocols
As previously described (73 (link), 89 (link)–91 (link), 93 (link), 94 (link), 96 (link)–98 (link)), eyes were harvested from euthanized mice at specific time points, homogenized in 400 μl PBS with sterile 1-mm glass beads (BioSpec Products, Inc., Bartlesville OK), serially diluted 10-fold in PBS, and plated onto BHI agar plates.
For in vivo bacterial growth analysis at different time points, experimental endophthalmitis was induced by intravitreally injecting approximately 100 CFU WT B. thuringiensis in 0.5 μl BHI into the right eyes of mice. At 4 h postinfection, one group of infected eyes was treated with OxPAPC, and another group served as the untreated control. At 2 h intervals thereafter, eyes were harvested for quantitation of intraocular bacterial growth (73 (link), 89 (link)–91 (link), 93 (link), 94 (link), 96 (link)–98 (link)).
+ Open protocol
+ Expand
2

Quantifying Microbial Burden in Mouse Eyes

Check if the same lab product or an alternative is used in the 5 most similar protocols
As previously described, harvested eyes from euthanized mice at specific time points were homogenized in 400 µL PBS with sterile 1-mm glass beads (BioSpec Products, Inc., Bartlesville, OK, USA), serially diluted 10-fold in PBS, and plated onto BHI agar plates.20 (link),21 (link),24 (link),25 (link),28 (link),44 (link)
+ Open protocol
+ Expand
3

Quantifying Intraocular Bacterial Loads

Check if the same lab product or an alternative is used in the 5 most similar protocols
Intraocular bacteria were quantified as previously described.1 (link),33 (link),34 (link),47 (link),48 (link),74 (link)77 (link, no link found, link),83 (link) Briefly, infected eyes were harvested from euthanized mice at 0, 2, 6, 8, 10, and 12 hours postinfection. Infected eyes were then homogenized in 400 μL PBS with sterile 1-mm glass beads (BioSpec Products, Inc., Bartlesville, OK, USA). Eye homogenates were then diluted 10-fold in PBS, plated onto BHI agar plates and quantified by track dilution.
+ Open protocol
+ Expand
4

Quantification of Intraocular Bacterial Load

Check if the same lab product or an alternative is used in the 5 most similar protocols
Intraocular bacteria were quantified as previously described (Moyer et al., 2009 (link), Novosad et al., 2011 (link), Parkunan et al, 2014 (link), Parkunan et al., 2015 (link), and Ramadan et al., 2008 (link)). Whole eyes were removed from euthanized mice at 3, 6, 9, and 12 h postinfection. Eyes were homogenized in PBS with sterile 1mm glass beads (BioSpec Products, Inc., Bartlesville, OK). Homogenates were plated and bacterial numbers were quantified by the track dilution method. Values represent the mean ± SEM for N≥6 eyes per time point. Two independent experiments were performed.
+ Open protocol
+ Expand
5

Quantifying Bacterial Infection in Eyes

Check if the same lab product or an alternative is used in the 5 most similar protocols
Bacteria were quantified by harvesting infected eyes at 0, 4, 8, and 12 hours postinfection. The eyes were homogenized with 1 mm sterile glass beads (Biospec products, Inc., Bartlesville OK) in 400 µl PBS. Bacteria were then track diluted 10-fold onto brain-heart infusion (BHI) agar and quantified [30] (link), [37] (link), [38] (link). Values represent the mean ± standard deviation (SD) for N≥4 eyes per time point.
+ Open protocol
+ Expand
6

Measuring Myeloperoxidase Levels in Ocular Inflammation

Check if the same lab product or an alternative is used in the 5 most similar protocols
Inflammatory cell influx was assessed by measuring myeloperoxidase concentrations using a sandwich ELISA (Hycult Biotech, Plymouth Meeting, PA, USA), as previously described. At various time points, eyes were harvested, transferred into PBS supplemented with proteinase inhibitor cocktail (Roche Diagnostics, Indianapolis, IN, USA), and homogenized using 1-mm sterile glass beads (BioSpec Products, Inc.). Uninfected eye homogenates were the negative controls. The lower limit of detection for this assay was 2 ng/mL.24 (link),42 (link)
+ Open protocol
+ Expand
7

Quantification of Ocular Inflammation

Check if the same lab product or an alternative is used in the 5 most similar protocols
As previously described, the extent of inflammatory cell influx into infected mouse eyes was semi-quantified using a myeloperoxidase (MPO) sandwich ELISA (Hycult Biotech, Plymouth Meeting PA). Infected eyes of euthanized mice were harvested at various time points and transferred into PBS supplemented with proteinase inhibitor cocktail (Roche Diagnostics, Indianapolis IN). Harvested eyes were then homogenized using 1-mm sterile glass beads (BioSpec Products, Inc.). Negative controls included homogenates of uninfected eyes (Mursalin et al., 2020b (link); Parkunan et al., 2014 (link)). The lower limit of detection for this assay was 2 ng/ml.
+ Open protocol
+ Expand
8

Quantifying Inflammatory Cell Infiltration via MPO ELISA

Check if the same lab product or an alternative is used in the 5 most similar protocols
Inflammatory cell infiltration was estimated by quantifying myeloperoxidase (MPO) using a sandwich ELISA (Hycult Biotech, Plymouth Meeting PA), as previously described. At 10 h postinfection, eyes were harvested, transferred into PBS supplemented with proteinase inhibitor cocktail (Roche Diagnostics, Indianapolis, IN) and homogenized using 1-mm sterile glass beads (BioSpec Products, Inc.). Uninfected eye homogenates were the negative controls. The lower limit of detection for this assay was 2 ng/ml (73 (link), 89 (link), 91 (link), 96 (link)–98 (link)).
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!