Aniline (An, analytically pure) and chitosan (medium molecular weight) were obtained from Aldrich Chemical Co. Ltd, and the Aniline was distilled under reduced pressure prior to use. Ammonium persulfate [(NH4)2S2O8, APS] and aminosulfonic acid (NH2SO3H) were purchased from Tianjin Daming Chemical Co. Ltd. AR grade acetic acid, acetone and ethanol were used as received.
Aniline
Manufactured by Merck Group
Sourced in United States, Germany, India, United Kingdom, France, Australia, Cameroon, Canada, Spain, Italy, China
Aniline is a chemical compound that serves as a raw material for the production of various other chemicals and materials. It is a colorless to pale-yellow liquid with a distinctive, unpleasant odor. Aniline is used as a precursor in the synthesis of a wide range of other organic compounds, including dyes, pesticides, and pharmaceuticals.
Automatically generated - may contain errors
Lab products found in correlation
Ammonium persulfate, by Merck Group (54 mentions)
Hydrochloric acid (hcl), by Merck Group (52 mentions)
Sodium hydroxide (naoh), by Merck Group (31 mentions)
Sulfuric acid, by Merck Group (20 mentions)
Ethanol, by Merck Group (19 mentions)
Methanol, by Merck Group (18 mentions)
Acetone, by Merck Group (17 mentions)
Sodium chloride (nacl), by Merck Group (15 mentions)
Toluene, by Merck Group (12 mentions)
Dimethyl sulfoxide (dmso), by Merck Group (10 mentions)
Acetonitrile, by Merck Group (10 mentions)
N methyl 2 pyrrolidone, by Merck Group (10 mentions)
Potassium chloride (kcl), by Merck Group (10 mentions)
Silver nitrate, by Merck Group (9 mentions)
N n dimethylformamide (dmf), by Merck Group (9 mentions)
Pyrrole, by Merck Group (8 mentions)
Acetic acid, by Merck Group (8 mentions)
Ammonium persulfate ap, by Merck Group (7 mentions)
Chitosan, by Merck Group (7 mentions)
Hydrogen peroxide, by Merck Group (7 mentions)
297 protocols using aniline
1
Synthesis of Aniline-Chitosan Polymer
2
Cellulose Fiber Surface Modification
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
All chemicals and solvents are ACS reagent grade, were purchased from commercial vendors and used directly unless otherwise stated. Sulfuric acid (H2SO4, 95.0–98.0%), ammonium persulfate [(NH4)2S2O8), ≥98%, APS] and aniline (≥99%), were purchased from Sigma-Aldrich (now Merck KGaA, Darmstadt, Germany); aniline was distilled under nitrogen prior to use. Hydrocloric acid (HCl, ≥37%) was purchased from VWR Chemicals (Vienna, Austria); a solution of ca. 25 wt% of Al2(SO4)3 in water (commercial name FLOCLINE S8C) was purchased from Bio-Line s.r.l. (Milano, Italy). Bare cellulose fibers (pine tree long fiber with sulfate treatment) were kindly provided by Cromatos s.r.l. (Forlì, Italy). Universal pH paper test (Jovitec) was used for the pH measures.
3
Synthesis of Doped Perylene Dianhydride Nanocomposites
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Aniline, chloroplatinic
acid hexahydrate (H2PtCl6, 6H2O,
≥37.50% Pt basis), perylene-3,4,9,10-tetracarboxylic dianhydride,
ammonium persulfate [(NH4)2S2O8] (APS), and titanium(IV) isopropoxide [Ti{OCH(CH3)2}4] were bought from Sigma-Aldrich and were
used as supplied, except Aniline which was distilled before use. Methanol
(HPLC Grade) was supplied by S D Fine-Chem Limited. Deionized water
(18 MU cm, Millipore Milli-Q water) was used to prepare solutions
where necessary.
acid hexahydrate (H2PtCl6, 6H2O,
≥37.50% Pt basis), perylene-3,4,9,10-tetracarboxylic dianhydride,
ammonium persulfate [(NH4)2S2O8] (APS), and titanium(IV) isopropoxide [Ti{OCH(CH3)2}4] were bought from Sigma-Aldrich and were
used as supplied, except Aniline which was distilled before use. Methanol
(HPLC Grade) was supplied by S D Fine-Chem Limited. Deionized water
(18 MU cm, Millipore Milli-Q water) was used to prepare solutions
where necessary.
4
Silkworm Cocoon-Derived Biopolymer Extraction
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Silkworm cocoons, sodium carbonate (Merk, St. Louis, MO, USA, >98%), nitric acid (Fermont, Monterrey, Nuevo Leon, Mexico), dimethylsulfoxide (DMSO) (Merk, St. Louis, MO, USA, >99%), 3-aminobenzoic acid (Merk, St. Louis, MO, USA, >98%), aniline (Merk, St. Louis, MO, USA, >99.5%), sulfuric acid (Merk, St. Louis, MO, USA, >98%), ammonium persulfate (APS) (Merk, St. Louis, MO, USA, 98%), triple distilled water.
5
Photocrosslinking of Aniline-Based Hydrogels
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Aniline (ANI), Aniline-2-sulfonic acid (ANIs), ammonium persulfate (APS), ferric chloride (FeCl3), sodium chloride (NaCl), hydrochloric acid (HCl), dimethyl sulfoxide (DMSO), acetone, bis(2,4,6-trimethylbenzoyl)-phenylphosphineoxide (Irgacure 819), and poly-ethylene glycol diacrylate (PEGDA) with MW ∼575 Da were purchased by Merk.
6
Synthesis and Characterization of Polycamphor-Modified Polyaniline Nanocomposite
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
PCL with a molecular weight of 80,000 g/mol and (1S)-(+)-10-Camphorsulfonic acid (CSA), were purchased from Sigma-Aldrich (Inc. St. Louis, MO. USA). Aniline (99.0%, monomer), Ammonium Peroxydisulfate (APS), N,N-dimethyl formamide (DMF), Hydrochloric acid (HCL), Barium Titanate (BaTiO3), Chloroform (CHF), methanol, and Acetone were purchased from Merk (Darmstast, Germany). Fetal bovine serum (FBS), Phosphate-buffered saline (PBS), 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT), RPMI 1640 (culture medium), trypsin–EDTA, Penicillin–Streptomycin, and Isopropanol were supplied from Sigma–Aldrich. MG-63 cell line, were obtained from Pasteur cell bank of Iran. Aniline was purified by distillation in vacuum before use.
7
Aniline Polymerization and Characterization
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
All the reagents used in this work were of analytical grade (99.99% purity, unless otherwise specified). Ultra-clean deionized water (DIW), purified by a TKA Milli-Q 50 system, was consistently used throughout the experiments. Acetone, sulfuric acid (97% H2SO4), D( +)-sucrose, ethanol and aniline (99% C6H5NH2) were supplied by Merk. The nitrogen and oxygen 5.0 purity gas bottles were acquired from Messer. The TEQS multimode FO of 400 μm diameter was provided by Thorlabs. The additional tools used in the aniline polymerization protocol, such as the Pasteur glass pipettes (2 mL capacity, 230 mm length), the double-wall glass (diameter 55 mm, capacity 150 mL, height 85 mm) and the magnetic stir plate were obtained from VWR. The TC120 heated circulating bath was purchased from Grant Instruments.
8
Aniline-Silver Nitrate Reduction Protocol
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Aniline (ACS reagent, ≥ 99.5%), silver nitrate (≥ 99.5% (AT)), dodecyl benzene sulfonic acid (DBSA) surfactant are all products of Sigma-Aldrich Company, USA. Carbon black (CB) was provided from Rubber workshop at NRC, Egypt.
9
Flame Retardant Polymer Synthesis
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Aniline, piperazine, resorcinol,
diphenyl chlorophosphate, dimethyl methyl phosphonate, methanol, and
1,3-phenylene diamine were purchased from Aldrich, Germany. Thionyl
chloride, triethylamine, chloroform, and tetrahydrofuran (THF) were
purchased from Samchun Chemical Company, Korea. Polycarbonate (PC),
ABS, and RDP of commercial grades were provided by Cheil Industries,
Korea. EVA which is a blend of EVA copolymer, LLDPE, and PE-g-MA (80:10:10) was provided by the LS-Cable Company, Korea.
diphenyl chlorophosphate, dimethyl methyl phosphonate, methanol, and
1,3-phenylene diamine were purchased from Aldrich, Germany. Thionyl
chloride, triethylamine, chloroform, and tetrahydrofuran (THF) were
purchased from Samchun Chemical Company, Korea. Polycarbonate (PC),
ABS, and RDP of commercial grades were provided by Cheil Industries,
Korea. EVA which is a blend of EVA copolymer, LLDPE, and PE-g-MA (80:10:10) was provided by the LS-Cable Company, Korea.
10
Synthesis of porphyrin and phthalocyanine
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Acetonitrile, methanol, and chloroform were purchased from Aldrich (Lyon, France) and used as solvents. Aniline, sulphuric acid [H2SO4 (0.5M)], ammonium peroxodisulfate [(NH4)2S2O8], and copper (II) 2,9,16,23-tetra-tert-butyl-29H,31H-phthalocyanine (purity 97%) and 5,10,15,20-tetraphenyl-21H,23H-porphine (purity 97%), denoted as CuPctBu and TPPH2, respectively, were obtained from Aldrich and used without further purification.
About PubCompare
Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.
We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.
However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.
Ready to get started?
Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required
Revolutionizing how scientists
search and build protocols!