Al foil

Manufactured by MTI Corporation

Sourced in United States

Aluminum foil is a thin, flexible metallic sheet used as a versatile laboratory material. Its core function is to provide a lightweight, durable, and malleable surface for various laboratory applications.

Automatically generated - may contain errors

Lab products found in correlation

5 protocols using al foil

Graphite-Based Potassium-Ion Battery Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols

Natural graphite flakes (99.9%, ~10 mesh, Cat. no. 43319, Alfa Aesar), potassium bis(fluorosulfonyl) imide (KFSI, 99.9%, Suzhou Fluolyte Co., Ltd), ethylene carbonate (EC, battery grade, Novolyte), dimethyl carbonate (DMC, battery grade, Novolyte), potassium cubes (Merck), Al foil (MTI Corporation), and glass microfiber separator (GF/D, Cat no. 1823-257, Whatman) were used as received.

Kravchyk K.V., Bhauriyal P., Piveteau L., Guntlin C.P., Pathak B, & Kovalenko M.V. (2018). High-energy-density dual-ion battery for stationary storage of electricity using concentrated potassium fluorosulfonylimide. Nature Communications, 9, 4469.

+ Open protocol

+ Expand

Fabrication of Sodium-Ion Battery Anode

Check if the same lab product or an alternative is used in the 5 most similar protocols

Carbon black (Super C65, TIMCAL), carboxymethyl cellulose (CMC, Grade: 2200, Lot No. B1118282, Daicel Fine Chem Ltd.), NaClO₄ (98%, Alfa Aesar, additionally dried), propylene carbonate (BASF, battery grade), 4-fluoro-1,3-dioxolan-2-one (FEC, Hisunny Chemical, battery grade), 1 M solution of LiPF₆ in ethylene carbonate/dimethyl carbonate (EC/DMC, Novolyte, Celgard separator (Celgard 2400, 25 µm microporous monolayer polypropylene membrane, Celgard Inc. USA), glass microfiber separator (GF/D, Cat No. 1823–257, Whatman), Al foil (MTI Corporation), Na foil (Sigma-Aldrich), Li foil (MTI Corp.), Sb₂S₃ (99.995%, Sigma Aldrich), Coin-type cells (Hohsen Corp., Japan),

Kravchyk K.V., Kovalenko M.V, & Bodnarchuk M.I. (2020). Colloidal Antimony Sulfide Nanoparticles as a High-Performance Anode Material for Li-ion and Na-ion Batteries. Scientific Reports, 10, 2554.

+ Open protocol

+ Expand

Synthesis and Characterization of Solid Electrolytes

Check if the same lab product or an alternative is used in the 5 most similar protocols

Li₂CO₃ (99.9%, Sigma-Aldrich), La₂O₃ (99.9%, Sigma-Aldrich), ZrO₂ (99.9%, Sigma-Aldrich), Ta₂O₅ (99.9%, Sigma-Aldrich), were purchased from Sigma-Aldrich. Poly(ethylene glycol) diacrylate (PEGDA, Aladdin, Mv ≈ 1000) phenylbis (2,4,6-trimethylbenzoyl)-phosphine oxide (Aladdin), succinonitrile (Aladdin), and LiTFSI (Sigma-Aldrich) were also purchased. Lithium iron phosphate (LiFePO₄), Ni-rich layered oxides LiNi_0.8Co_0.1Mn_0.1O₂ (NCM811), conductive carbon black (Super-P), Li foil (0.45 mm, 99.9%), Al foil (20 μm, 99.99%), polyvinylidene fluoride (PVDF) were purchased from MTI Corporation. Aluminum plastic film, tab and sealing machine were purchased from Guangdong Canrd New Energy Technology Co., Ltd.

Mu Y., Yu S., Chen Y., Chu Y., Wu B., Zhang Q., Guo B., Zou L., Zhang R., Yu F., Han M., Lin M., Yang J., Bai J, & Zeng L. (2024). Highly Efficient Aligned Ion-Conducting Network and Interface Chemistries for Depolarized All-Solid-State Lithium Metal Batteries. Nano-Micro Letters, 16, 86.

+ Open protocol

+ Expand

Preparation of Hard Carbon Electrodes

Check if the same lab product or an alternative is used in the 5 most similar protocols

The carbon materials were
ground using a mortar and pestle to break down the monolithic structure
and homogenize the particle size. After that, the carbon powder was
mixed with the binder carboxymethyl cellulose (Sigma-Aldrich) in a mass ratio of 9:1 using a mortar and pestle for 30 min to
prepare an aqueous slurry. The hard carbon electrodes were then coated
by using the mixed slurry onto Al foil (MTI Corporation). Before being cut into pieces for the further assembly of coin
cells, the coated Al foil was dried at room temperature, followed
by 80 °C in a vacuum oven overnight. The loading mass of the
coated electrodes (0.8 cm × 0.8 cm) was controlled within a range
of 1.5–2.0 mg cm^–2.

Glatthaar C., Wang M., Wagner L.Q., Breckwoldt F., Guo Z., Zheng K., Kriechbaum M., Amenitsch H., Titirici M.M, & Smarsly B.M. (2023). Lignin-Derived Mesoporous Carbon for Sodium-Ion Batteries: Block Copolymer Soft Templating and Carbon Microstructure Analysis. Chemistry of Materials, 35(24), 10416-10433.

+ Open protocol

+ Expand

Lithium-sulfur battery fabrication

Check if the same lab product or an alternative is used in the 5 most similar protocols

LiTFSI (99.95%), anhydrous DOL (99.8%), anhydrous DME (99.5%), NMP (99%), super P carbon, and tragacanth was purchased from Sigma–Aldrich. LiNO₃ (99.999%) and PEO were purchased from Alfa Aesar. The sulfur powder was obtained from Duksan ultrahigh pure chemicals, and battery-grade PVDF powder and Al foil were procured from MTI corporation. High purity Li foil was obtained from Lithsun Corporation.

Senthil C., Kim S.S, & Jung H.Y. (2022). Flame retardant high-power Li-S flexible batteries enabled by bio-macromolecular binder integrating conformal fractions. Nature Communications, 13, 145.

+ Open protocol

+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Revolutionizing how scientists
search and build protocols!