The largest database of trusted experimental protocols

Amersham hyperfilm ecl film

Manufactured by GE Healthcare
Sourced in United States, United Kingdom, Germany

Amersham Hyperfilm ECL films are high-performance chemiluminescent detection films used for Western blotting. They are designed to capture and record the light emitted during enhanced chemiluminescence (ECL) reactions.

Automatically generated - may contain errors

32 protocols using amersham hyperfilm ecl film

1

Tangeretin Modulates Transcriptional Regulators

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cells were treated with vehicle or tangeretin (20 and 40 μM) for 24 h. Total cellular proteins were extracted using RIPA buffer (Thermo Fisher Scientific, Rockford, IL, USA). For nuclear extract preparation, cells were harvested, and nuclear proteins were prepared using NE-PER nuclear and cytoplasmic extraction reagent (Thermo Fisher Scientific, Rockford, IL, USA). The proteins were separated by 10% or 12% SDS–PAGE and transferred onto a PVDF membrane (PerkinElmer, Boston, MA, USA), followed by incubation with specific primary antibodies for human proteins, including anti-ANGPTL3 (ABclonal, Woburn, MA, USA), anti-LXRα (Abcam, Cambridge, MA, USA), anti-HNF-1α (Cell Signaling Technology, Danvers, MA, USA), anti-HDAC2 (GeneTex, Irvine, CA, USA), and anti-actin (Millipore Sigma, St. Louis, MO, USA). The blots were incubated with the appropriate horseradish peroxidase (HRP)-conjugated secondary antibodies (GeneTex, Irvine, CA, USA) at room temperature. The protein signals were detected using Amersham ECLTM prime Western reagents (GE Healthcare, Buckinghamshire, UK), and chemiluminescence-exposed Amersham HyperfilmTM ECL film (GE Healthcare, Buckinghamshire, UK) was analyzed.
+ Open protocol
+ Expand
2

Pesticides Effects on Cell Proliferation

Check if the same lab product or an alternative is used in the 5 most similar protocols
Pesticides endosulfan, glyphosate, pentachlorophenol, permethrin, propoxur, and paraoxon and the metabolites AMPA (aminomethylphosphonic acid, from glyphosate) and endosulfan lactone (from endosulfan) as well as etoposide were purchased to Sigma-Aldrich, Mexico (Table 1). DMSO was purchased from ATCC. The CellTiter 96 AQueous One Solution Cell Proliferation reagent from PROMEGA was used to determine cytotoxicity. The high performance chemiluminescence film kit and the Amersham HyperFilmTM ECL film from GE Healthcare were used for the protein analysis.
+ Open protocol
+ Expand
3

Tanshinone IIA Regulates Lipid Metabolism

Check if the same lab product or an alternative is used in the 5 most similar protocols
Western blot analysis was carried out as described previously [41 (link)]. Cells were treated with vehicle or tanshinone IIA (5 and 10 μM) for 24 h. For preparation of total cellular proteins, the cells were harvested with RIPA buffer (Thermo Fisher Scientific). For nuclear-extract preparation, the cells were harvested using NE-PER nuclear and cytoplasmic extraction reagent (Thermo Fisher Scientific). The samples were separated by 10% SDS-PAGE and transferred to PVDF membranes (PerkinElmer, Boston, MA, USA). The blots were incubated with the following primary antibodies at 4 °C for 24 h: anti-FASN (A6273) (1:2000) (ABclonal, Woburn, MA, USA), anti-ACC1 (#3676) (1:1000) and anti-phospho-ACC1 (Ser79) (#3661) (1:1000) (Cell Signaling Technology, Danvers, MA), anti-SCD1 (ab39969) (1:1000) and anti-LXRα (ab41902) (1:1000) (Abcam), anti-HDAC2 (GTX112957) (1:3000) (GeneTex, Irvine, CA, USA), anti-SREBP1 (sc-13551) (1:200) (Santa Cruz Biotechnology, Santa Cruz, CA, USA) and anti-actin (MAB1501) (1:30000) (Thermo Fisher Scientific). The blots were incubated with the appropriate HRP-conjugated secondary antibodies, and the amount of each protein was measured by Amersham ECLTM prime Western blotting detection reagent. The chemiluminescent signal was visualized using Amersham HyperfilmTM ECL film (GE Healthcare, Buckinghamshire, UK).
+ Open protocol
+ Expand
4

Protein Extraction and Western Blot Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cells were washed with Dulbecco's phosphate-buffered saline (DPBS, Gibco BRL, Life Technologies) and proteins were extracted using mammalian cell lysate buffer (Biyuntian, Beijing, China). Samples were then centrifuged at 14000 rpm for 5 min at 4°C and protein concentrations of the supernatants were determined by the bicinchoninic acid (BCA) protein concentration detection kit (Biyuntian, Beijing, China). The extracted proteins were separated by 12% SDS-PAGE, transferred onto a 0.22 μM nitrocellulose membranes, and incubated with mouse anti-α-actin (TA-09, ZSGB-BIO, Beijing, China) or mouse anti-LL-37 (sc-166770, Santa Cruz Biotechnolology). Membranes were washed and then incubated with HRP-conjugated goat anti-mouse antibodies (EM35110, EMAR, Beijing, China). Immunoreactions were visualized using Pierce Western ECL substrate (Thermo Scientific, Rockford, IL) or Clarity™ Western ECL Substrate (BioRad, Hercules, CA) and exposed to Amersham Hyperfilm ECL film (GE Healthcare Biosciences, Piscataway, NJ). Protein bands were quantified by Quantity One analysis (BioRad).
+ Open protocol
+ Expand
5

H. pylori BabA and BabB Protein Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
H. pylori strains were grown on blood agar plates for up to 48 h. Bacterial cells were harvested in phosphate-buffered saline (PBS) by centrifugation (5,000 × g, 4°C, 10 min). Equal amounts of bacteria were resuspended in sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) sample buffer, incubated for 10 min at 95°C, separated by SDS-PAGE (8%), and analyzed by Western blotting. Primary antibodies against BabA and BabB raised in rabbits were kindly provided by Thomas Borén. Peroxidase-labeled AffiniPure goat anti-rabbit IgG (H+L) (Jackson ImmunoResearch Laboratories) was used as a secondary antibody. Western blots were developed with SuperSignal West Pico chemiluminescent substrate (Thermo Scientific, Rockford) and exposed to Amersham Hyperfilm ECL film (GE Healthcare, Little Chalfont, United Kingdom).
+ Open protocol
+ Expand
6

Viral Infection Grading and Protein Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Following six weeks of urine co-culture, the viral infection was graded in a blind fashion according to CMV CPE with a scale of: 1+ (0–20% CPE), 2+ (20–50% CPE), 3+ (50–80% CPE), 4+ (80–100% CPE), and the urine co-cultures were harvested. The cultures were pelleted by centrifugation at 15,300 x g for 10 minutes, washed with PBS and pelleted again. The pellet was resuspended in protease inhibitor cocktail (Sigma) and RIPA buffer (50 mM Tris HCl pH 8.0, 150 mM NaCl, 1% NP-40, 0.5% sodium deoxycholate, 0.1% SDS, 1 mM EDTA; adjusted to pH 7.4), and incubated on ice for 30 minutes. The lysate was centrifuged at 14,000 x g for 20 minutes at 4°C and the protein was quantitated using a Bio-Rad protein assay kit (Bio-Rad). Primary antibodies for western blotting included mouse anti-GFP (clone: BV-F4, 1:1,000, BioVision), mouse anti-RhCMV IE-1 (clone: 2A1.2, 1:750) kindly provided by Drs. Scott Hansen and Louis Picker (Oregon Health & Science University), and mouse anti-β actin (clone: AC15, 1:1,000; Sigma) as a lysate control. After probing with goat anti-mouse IgG (1:10,000, Cedarlane), the membrane was treated with Luminata Cresendo Western HRP substrate (Millipore) and exposed on an Amersham Hyperfilm ECL film (GE Healthcare).
+ Open protocol
+ Expand
7

Analyzing Endoplasmic Reticulum Stress Markers

Check if the same lab product or an alternative is used in the 5 most similar protocols
For western blot analyses, subconfluent cells were washed twice with PBS and placed in fresh supplemented medium containing 60 nM thapsigargin or 2.5 µg/ml tunicamycin. Protein lysates (10–30 µg) were prepared following 6 and 24 h treatment, resolved by 10% SDS-PAGE and transferred onto nitrocellulose membranes. Primary antibodies used were goat anti-ERp46 (dilution, 1:1,000; sc-49660; Santa Cruz Biotechnology, Inc., Dallas, TX, USA), mouse anti-GRP78 (dilution, 1:1,000; #610979, BD Pharmingen, San Diego, CA, USA) and rabbit anti-PDI antibody (dilution, 1:1,000; #2446, Cell Signaling Technology, Inc., Danvers, MA, USA). Equal protein loading was verified using mouse β-actin-specific antibody (A00702; dilution, 1;1,000; GenScript, Piscataway, NJ, USA). Secondary horseradish peroxidase-conjugated antibodies (anti-goat, sc-2378; anti-rabbit, sc-2030; anti-mouse, sc-2031; dilution, 1:1,000; Santa Cruz Biotechnology Inc.) were used. Incubation in primary and secondary antibody was carried out for 2 h at room temperature in Tris-buffered saline/0.1% Tween 20. Protein bands were visualized by enhanced chemiluminescence using Pierce ECL substrate (Thermo Fisher Scientific, Inc.) and Amersham Hyperfilm ECL film (GE Healthcare Life Sciences, Chalfont, UK).
+ Open protocol
+ Expand
8

Western Blot Protein Extraction and Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
For total lysates, cells were disrupted in lysis buffer (50 mM Tris–HCl, 20 mM NaCl, 1 mM MgCl2, and 0.1% SDS) containing a protease and phosphatase inhibitor cocktail (Roche) supplemented with 0.1% endonuclease (benzonase, Millipore) for 10 min at room temperature with rotation. For fractionation analysis, cells were lysed using an NE-PER kit (ThermoFisher) following the manufacturer’s instructions. Laemmli buffer containing beta-mercaptoethanol was added to the samples, which were subsequently boiled for 5 min at 95 °C. The proteins were separated on SDS–PAGE denaturing gels (Bio-Rad) and transferred to nitrocellulose membranes (Bio-Rad). Next, the membranes were blocked with phosphate-buffered saline (PBS)–milk (5%) or PBS–bovine serum albumin (BSA) (3%) for 1 h, and signals were visualized using WesternBright ECL (Advansta) on a digital imaging system (GeneGnome, Syngene) or using Amersham Hyperfilm ECL film (GE) on a table-top processor (Curix 60, AGFA). The antibodies used in this study are listed in Supplementary Table S1.
+ Open protocol
+ Expand
9

Western Blot Analysis Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
SDS-PAGE was carried out according to Laemmli [27 (link)] on 10% acrylamide gels or using Invitrogen 10% Bis-Tris MIDI gels as indicated. Gels were transferred to nitrocellulose membranes (0.45 μm, Bio-Rad Laboratories) and stained with Amido black (Sigma). Immunoblotting was carried out as previously described [22 (link)] using HRP-conjugated secondary antibodies (Jackson ImmunoResearch Laboratories) and enhanced chemiluminescence (Thermo Scientific), visualized by autoradiography (Amersham Hyperfilm ECL film, GE Healthcare). Protein concentrations were determined according to Lowry [23 (link)].
+ Open protocol
+ Expand
10

Protein Analysis with Immunoblotting

Check if the same lab product or an alternative is used in the 5 most similar protocols
Protein extraction, electrophoresis, and gel transfer to nitrocellulose membranes were performed as previously described43 (link). The following primary antibodies were used: rabbit anti-PGC-1α (2G6, 1:400), rabbit anti-TFAM (D5C8, 1:500), rabbit anti-PARP (#9542, 1:500), rabbit anti-cleaved caspase-9 (Asp391/18C8, 1:500), mouse anti-caspase-8 (#9746, 1:500), rabbit anti-cleaved caspase-9 (Asp 315, 1:500), rabbit anti-caspase-9 (#9502, 1:500) from Cell Signaling Technology (Danvers, MA), and mouse anti-GAPDH (1:1000, Santa Cruz Biotechnology, Dallas, TX). For PGC-1α and TFAM immunoblots, membranes were incubated with HRP-conjugated goat anti-rabbit IgG (1:1000), developed with West Dura substrate (Thermo Fisher Scientific), and imaged on Amersham Hyperfilm™ ECL film (GE Healthcare Bio-Sciences, Pittsburgh, PA). For other immunoblots, blots were incubated with IRDye® 800CW conjugated polyclonal goat anti-mouse IgG (1:10,000) or IRDye® 680RD conjugated polyclonal goat anti-rabbit IgG (1:5,000) from LI-COR biosciences (Lincoln, NE) and imaged using the Odyssey Infrared Imaging System (LI-COR Biosciences). When described, blots were stripped with Restore™ stripping buffer (Thermo Fisher Scientific) when probing with alternative antibodie.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!