The largest database of trusted experimental protocols

Waters 2998 uv vis diode array detector

Manufactured by Waters Corporation

The Waters 2998 UV-Vis Diode Array Detector is a laboratory instrument used for the detection and analysis of chemical compounds. It employs a diode array technology to provide full spectral information across a wide wavelength range. The detector is designed to be used in conjunction with liquid chromatography systems for the identification and quantification of analytes.

Automatically generated - may contain errors

4 protocols using waters 2998 uv vis diode array detector

1

Synthesis and Characterization of Clickable Reagents

Check if the same lab product or an alternative is used in the 5 most similar protocols
All reagents were obtained from commercial sources and used without further purification. TCO-PEG3-Amine, TCO-PEG4-NHS, Methyltetrazine-PEG4-NHS, and tetrazine-fluorophores (AF488, Cy3, AF594) were purchased from Click Chemistry Tools, LLC. Flash column chromatography was performed using Sorbtech purity flash cartridges or Biotage SNAP Bio C18 columns for reversed phase chromatography. NMR spectra were recorded on a Bruker Avance UltraShield 400 MHz spectrometer. Chemical shifts are reported in parts per million (δ) and referenced to the residual solvent. Reactions were monitored via liquid chromatography-mass spectrometry (LC-MS) on a Waters instrument equipped with a Waters 2424 ELS Detector, Waters 2998 UV-Vis Diode array Detector, and a Waters 3100 Mass Detector. UV-Vis analysis of antibodies was performed on a NanoDrop 1000 spectrophotometer.
+ Open protocol
+ Expand
2

NMR Spectroscopy and HPLC-MS Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
NMR spectra were recorded on a Bruker Avance UltraShield 400 MHz spectrometer. 1H NMR chemical shifts were reported in ppm relative to SiMe4 (δ = 0) and were referenced internally concerning residual protons (δ = 4.79 for D2O). Peak assignments, calculated chemical shifts, and peak integrals were based on reference solvent peaks. 2D Rotating Frame Overhauser Enhancement Spectroscopy (2D‐ROESY) experiments were performed to assess the interactions between dipolarly coupled hydrogens, and integrals were normalized to the reference hydrogen (H1) of the sbCD. All experiments were performed in D2O (0.5 mL) at a fixed sCD concentration (26 mM) with 10% (CD3)2SO. High‐performance liquid chromatography‐mass spectrometry analysis (HPLCMS) was performed on a Waters instrument equipped with a Waters 2424 ELS Detector, Waters 2998 UV–Vis Diode array Detector, and a Waters 3100 Mass Detector. Separations employed an HPLC‐grade water/acetonitrile (0.1% formic acid) solvent gradient with XTerra MS C18 Column, 125 Å, 5 µm, 4.6 × 50 mm column; Waters XBridge BEH C18 Column, 130 Å, 3.5 µm, 4.6 × 50 mm.
+ Open protocol
+ Expand
3

NMR and HPLC-MS Characterization of Cyclodextrin Complexes

Check if the same lab product or an alternative is used in the 5 most similar protocols
NMR spectra were recorded on a Bruker Avance UltraShield 400 MHz spectrometer. 1H NMR chemical shifts are reported in ppm relative to SiMe4 (δ = 0) and were referenced internally concerning residual protons (δ = 4.79 for D2O). Peak assignments, calculated chemical shifts and peak integrals are based on reference solvent peaks. Two-dimensional Rotating Frame Overhauser Enhancement Spectroscopy (2D-ROESY) experiments were performed to assess the interactions between dipolarly coupled hydrogens, and integrals were normalized to the reference hydrogen (H1) of the s-β-CD. All experiments were performed in D2O (0.7 mL) at a fixed s-β-CD concentration (26 mM) with 10% (CD3)2SO. High-performance liquid chromatography-mass spectrometry analysis (HPLC-MS, LCMS) was performed on a Waters instrument equipped with a Waters 2424 ELS Detector, Waters 2998 UV-Vis Diode array Detector, and a Waters 3100 Mass Detector. Separations employed an HPLC-grade water/acetonitrile (0.1% formic acid) solvent gradient with XTerra MS C18 Column, 125Å, 5 μm, 4.6 mm X 50 mm column; Waters XBridge BEH C18 Column, 130Å, 3.5 μm, 4.6 mm X 50 mm.
+ Open protocol
+ Expand
4

Comprehensive Analytical Characterization

Check if the same lab product or an alternative is used in the 5 most similar protocols
1H and 13C nuclear magnetic resonance spectra were recorded on a Bruker Ascend 400 MHz spectrometer. MALDI data was acquired on a Bruker microflex MALDI-TOF MS. Silica Gel 60 (40–63 μm) was used for flash column purification. High performance liquid chromatography-mass spectrometry analysis (HPLC-MS) was performed with a Waters instrument equipped with a Waters 2424 ELS Detector, Waters 2998 UV–vis Diode array Detector, Waters 2475 Multiwavelength Fluorescence Detector, and a Waters 3100 Mass Detector. Separations employed Waters XTerra RP C18 5 μm or Waters XSelect CSH Fluoro-Phenyl 2.5 μm column, with a water:acetonitrile solvent gradient (0.1% formic acid). Fluorescence measurements were conducted with a QuantaMaster 400 fluorimeter (PTI, New Jersey, USA), and UV–vis absorption spectra on a HORIBA Dual-FL spectrophotometer.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!