The largest database of trusted experimental protocols

Vt env 414s

Manufactured by Med Associates
Sourced in Georgia

The VT-ENV-414S is a laboratory equipment product. It is designed to provide controlled environmental conditions for various experimental or testing purposes. The core function of this product is to maintain and regulate temperature, humidity, and other environmental parameters within a specific range.

Automatically generated - may contain errors

Lab products found in correlation

3 protocols using vt env 414s

1

Fear Conditioning in Plexiglas Chambers

Check if the same lab product or an alternative is used in the 5 most similar protocols
The apparatus and stimuli used have been previously described (Heroux et al. 2016 (link); Murawski and Stanton 2010 (link); Murawski et al., 2012 (link); Robinson-Drummer et al. 2016 (link)). Fear conditioning occurred in four Plexiglas chambers measuring 16.5 cm × 12.1 cm × 21.6 cm which were arranged in a 2 × 2 formation on a Plexiglas stand within a fume hood to provide ambient light and background noise (Context A). Each chamber had a grid floor made of nine stainless steel bars (11.5 cm from the top of the chamber), 0.5 cm in diameter and spaced 1.25 cm apart. The alternate context (Context B) consisted of the same Plexiglas chambers with a convex wire mesh insert that covered the back wall and floor of the chamber and a white paper sleeve that covered the outside walls of the chamber. The 2-sec, 1.5-mA footshock unconditioned stimulus (US) was delivered using a shock scrambler (VT ENV-414S, Med Associates) connected to the grid floor of the chamber. The fear chambers were cleaned with 5% ammonium hydroxide solution prior to each load of experimental animals. Videos of each session (preexposure, training, testing) were recorded using Freeze Frame 3.0 software (Actimetrics) with freezing defined as a bout of 0.75 sec or longer without a change in video pixilation.
+ Open protocol
+ Expand
2

Contextual Fear Conditioning Apparatus

Check if the same lab product or an alternative is used in the 5 most similar protocols
The apparatus and stimuli used have been described previously [37 (link),46 (link)]. Briefly, fear conditioning occurred in four clear Plexiglas chambers arranged in a 2 × 2 formation on a Plexiglas stand within a fume hood (Context A – Pre Group). Each chamber had a grid floor made of nine stainless steel bars connected to a shock scrambler (Med Associates, Georgia, VT-ENV-414S). The alternate context (Context B – Alt-Pre Group) consisted of the same Plexiglas chambers with a convex wire mesh insert that covered the back wall and floor of the chamber and a white paper sleeve that covered the outside walls of the chamber. In Experiment 1B, 2, and 3, the unconditioned stimulus (US) was two, 1.5 mA foot-shocks, each 2s in duration, and presented 1s apart immediately upon chamber entry. In Experiment 1A, one immediate shock was given instead of two. Videos of each session (preexposure, training, testing) were recorded using Freeze-Frame 3.0 software (Actimetrics, Wilmette IL) with freezing defined as a bout of 0.75 s or longer without a change in video pixilation (see section 2.8.2).
+ Open protocol
+ Expand
3

Fear Conditioning Apparatus and Protocols

Check if the same lab product or an alternative is used in the 5 most similar protocols
The apparatus and stimuli used have been described previously [55 (link),60 ,63 (link)]. Briefly, fear conditioning occurred in four clear Plexiglas chambers within a fume hood (Context A – Pre group), with grid floors connected to shock scramblers (Med Associates, Georgia, VT-ENV-414S). The alternate context (Context B – Alt-Pre group) consisted of the same Plexiglas chambers with a convex wire mesh insert that covered the back wall and floor of the chamber and a white paper sleeve that covered the outside walls of the chamber. The unconditioned stimulus (US) was two, 1.5 mA foot-shocks, each 2s in duration, and presented 1s apart immediately upon chamber entry. Videos of each session (preexposure, training, testing) were recorded using Freeze-Frame 3.0 software (Actimetrics, Wilmette IL) with freezing defined as a bout of 0.75 s or longer without a change in video pixilation.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!