The largest database of trusted experimental protocols

64 slice lightspeed vct

Manufactured by GE Healthcare
Sourced in Japan, United States

The 64-slice LightSpeed VCT is a computed tomography (CT) scanner developed by GE Healthcare. It is designed to capture high-resolution, three-dimensional images of the human body. The scanner utilizes a 64-slice detector array and advanced imaging technology to provide rapid data acquisition and image reconstruction.

Automatically generated - may contain errors

6 protocols using 64 slice lightspeed vct

1

Standardized Aortic CT Angiography Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
All CT scans were performed using post-64-detector row CT scanners from Siemens (Somatom Definition Flash, Somatom Force, or Somatom Drive, Forchheim, Germany) and GE (Revolution CT, Discovery CT750 HD, or 64-slice LightSpeedVCT, GE Medical Systems, Milwaukee, WI, USA). Every scan started with non-contrast scanning from the thoracic inlet to the pubic symphysis to cover the entire aorta. Subsequently, contrast-enhanced CT was performed over the same area during the systemic arterial phase. The slice thickness was 1–5 mm for NCCT images and 1–1.5 mm for contrast-enhanced CTA images. The other scanning parameters were as follows: rotation time, 0.5 s; pitch, 1.2–1.375; matrix, 512 × 512; standard resolution algorithms; and tube voltage, 80–100 kV (Somatom Definition Flash or Somatom Force or Somatom Drive, Germany) and 120 kVp (Revolution CT or Discovery CT750 HD or 64-slice LightSpeedVCT, GE Healthcare, USA). The tube current was adjusted automatically using the noise index mode.
+ Open protocol
+ Expand
2

CT Imaging Parameters for Respiratory Scans

Check if the same lab product or an alternative is used in the 5 most similar protocols
All CT scans were performed using one of the following four scanners: GE Discovery CT750 HD (GE Healthcare, USA), 64-slice Light Speed VCT (GE Healthcare, USA); Somatom Definition Flash (Siemens Healthcare, Germany) and Somatom Sensation-16 (Siemens Healthcare, Germany). The scan parameters were as follows: tube current was 120–200 mA; tube voltage was 80–120 kV; scan layer thickness was 1–2 mm; reconstruction algorithm was STND/medium sharp; scan phase was deep inspiratory phase; and scan body position was supine.
+ Open protocol
+ Expand
3

Contrast-Enhanced Abdominal CT Imaging

Check if the same lab product or an alternative is used in the 5 most similar protocols
All patients underwent contrast-enhanced abdominal CT using one of the two multi-detector row CT (MDCT) systems (GE Lightspeed Ultra 8; GE Healthcare, Hino, Japan or 64-slice LightSpeed VCT, GE Medical systems, Milwaukee, WI, USA). The acquisition parameters are as follows: 120 kV; 160 mAs; 0.5- or 0.4-second rotation time; detector collimation: 8×2.5 mm or 64×0.625 mm; field of view, 350 mm × 350 mm; matrix, 512×512. After routine non-enhanced CT, arterial and portal venous-phase contrast-enhanced CT was performed after 22 s and 60 s delay following intravenous administration of 90−100 mL of iodinated contrast material (Ultravist 370, Bayer Schering Pharma, Berlin, Germany) at a rate of 3.0 or 3.5 mL/s with a pump injector (Ulrich CT Plus 150, Ulrich Medical, Ulm, Germany). Contrast-enhanced CT was reconstructed with reconstruction thickness of 2.5 mm. Portal venous-phase CT images were retrieved from the picture archiving and communication system (PACS) (Carestream, Canada) for image feature extraction because of well differentiation of tumor tissue from adjacent normal bowel wall.
+ Open protocol
+ Expand
4

Abdominal and Pelvic CT Imaging Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
All patients underwent abdominal and pelvic contrast enhanced arterial and portal venous CT using either of the two multi-detector row CT (MDCT) unit (GE Lightspeed Ultra 8, GE Healthcare, Hino, Japan or 64-slice LightSpeed VCT, GE Medical systems, Milwaukee, Wis). The utilized parameters are given below: 120 kV; 130 mAs; 0.6- or 0.4s rotation time; detector collimation: 8×0.625mm or 64×0.625mm; field of view, 350×350mm; matrix, 512×512. Following routine noncontrast-enhanced CT, arterial- and portal-venous phase contrast-enhanced CT were performed after 20 s and 60 s of delay after intravenous injection of 90-100 ml of iodinated contrast material (Ultravist 370, Bayer Schering Pharma, Berlin, Germany) at a rate of 3.0 to 3.5 ml/s with a pump injector (Ulrich CT Plus 150, Ulrich Medical, Ulm, Germany). All the arterial- and portal-venous phase CT was reconstructed with 2.5 mm of reconstruction thickness.
+ Open protocol
+ Expand
5

Contrast-Enhanced Chest CT Imaging Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
All patients underwent contrast-enhanced (reconstruction thickness of 1.25 mm) chest CT with one of two multi-detector row CT (GE Light-speed Ultra 8; GE Healthcare, Hino, Japan; 64-slice LightSpeed VCT, GE Medical systems, Milwaukee, WI, USA). The CT images acquisition parameters were as follows: 120 kV; 160 mAs; 0.5- or 0.4-second rotation time; detector collimation: 8×2.5 mm or 64×0.625 mm; field of view, 350 mm × 350 mm; matrix, 512×512. The contrast-enhanced CT image was performed after a 25-second delay following intravenous administration of 85 mL of iodinated contrast material (Ultravist 370, Bayer Schering Pharma, Berlin, Germany) at a rate of 3 mL/s with a pump injector (Ulrich CT Plus 150, Ulrich Medical, Ulm, Germany) after routine non-enhanced CT. We then retrieved the images in DICOM format from the picture archiving and communication system (PACS; Carestream, Canada).
+ Open protocol
+ Expand
6

Multi-Detector CT Imaging of Metastatic Cancer

Check if the same lab product or an alternative is used in the 5 most similar protocols
All images of the in-house dataset were acquired in the Department of Radiology at our hospital. Contrast-enhanced CT were performed on every patient using one of the two multi-detector row CT (MDCT) systems (GE Lightspeed Ultra 8, GE Healthcare, Hino, Japan or 64-slice LightSpeed VCT, GE Medical systems, Milwaukee, Wis), with the following acquisition parameters: 120 kV; 160 mAs; 0.5- or 0.4-second rotation time; detector collimation: 8 × 2.5 mm or 64 × 0.625 mm; field of view, 350 × 350 mm; matrix, 512 × 512. After routine non-enhanced CT, contrast-enhanced CT was performed after 25 s delay following intravenous administration of 85 ml of iodinated contrast material (Ultravist 370, Bayer Schering Pharma, Berlin, Germany) at a rate of 2.5–3.0 ml/s with a pump injector (Ulrich CT Plus 150, Ulrich Medical, Ulm, Germany). CT image was reconstructed with standard kernel, with interval: 1 mm–2.5 mm. Retrieval of CT images: All of the CT images were retrieved from the picture archiving and communication system (PACS) (Carestream, Canada). The final clinical stage of disease was determined with histological staging and/or surgical evidence of advanced or metastatic disease. T-stage, N-stage, M-stage and final clinical staging were performed as per the AJCC guideline, 7th edition29 .
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!