The largest database of trusted experimental protocols

Er041xg microwave bridge

Manufactured by Oxford Instruments

The ER041XG microwave bridge is a core piece of lab equipment designed for electron paramagnetic resonance (EPR) spectroscopy. It serves as an essential component in the measurement and analysis of paramagnetic species within samples.

Automatically generated - may contain errors

3 protocols using er041xg microwave bridge

1

EPR Analysis of Fe and MoFe Proteins

Check if the same lab product or an alternative is used in the 5 most similar protocols
EPR experiments were carried out with 25 μM FeP and 25 μM MoFeP. When present, the CowN concentration was 50 μM. Proteins were prepared under an N2 atmosphere in a solution containing 50 mM Tris, pH 8, 60 mM NaCl, 10 mM DT. Where indicated, CO was added to a partial pressure of 0.1 atm. Spectra were taken on a Bruker EMX spectrometer equipped with an ER041XG microwave bridge, an Oxford Instrument liquid He quartz ESR 900 cryostat, and a dual-mode cavity (ER4116DM) cryostat at 10K. Each spectrum represents the average of four scans. Instrument settings were: Instrument power, 6.4 mW; attenuation, 15 dB; modulation amplitude, 10.2 G; conversion time, 40.96 ms; time constant, 0.01 ms; gain, 30 dB; frequency, 9.64 GHz.
+ Open protocol
+ Expand
2

Spectroscopic Characterization of Organometallic Complexes

Check if the same lab product or an alternative is used in the 5 most similar protocols
All electronic absorption spectra were collected in a 1 cm quartz cuvette with a magnetic spin bar inside. Room temperature electronic absorption spectra for determining extinction coefficients were recorded on a Cary 50 spectrometer. Temperature controlled time dependent electronic absorption spectra were recorded either on a Cary 60 spectrometer equipped with Quantum Northwest TC1 temperature controller and stirrer, or on an 8453E Agilent UV-vis spectrometer equipped with an Unisoku Unispeks cryostat. Cyclic voltammetry was performed using a CHI600C electrochemical analyzer under Ar atmosphere with 0.1 M tetrabutylammonium hexafluorophosphate as the supporting electrolyte. A 2.0 mm glassy carbon electrode was used as working electrode; a Pt wire was used as counter electrode; a Ag wire was used as references electrode with ferrocenium/ferrocene(FeCp2+/0) couple as internal standard. All potentials are referenced to FeCp2+/0 couple. Solid-state IR spectra were collected on a Thermo Scientific Nicolet iS5 FT-IR spectrometer equipped with an iD5 ATR accessory. X-band EPR spectra were recorded as frozen solutions using a Bruker EMX spectrometer equipped with an ER041XG microwave bridge, an Oxford Instrument liquid-helium quartz cryostat, and a dual-mode cavity (ER4116DM). Magnetic moments were done by Evans's method at 298 K in CH2Cl2 on a Bruker DRX NMR spectrometer.41
+ Open protocol
+ Expand
3

Spectroscopic and Electrochemical Characterization

Check if the same lab product or an alternative is used in the 5 most similar protocols
Room temperature electronic absorbance spectra were collected on a Cary 50 spectrometer and low-temperature electronic absorbance spectra were collected on a 8453 Agilent UV-vis spectrophotometer equipped with an Unisoku Unispeks cryostat with a 1.00 cm quartz cuvette. Electronic paramagnetic resonance (EPR) spectra were recorded using a Bruker EMX spectrometer equipped with an ER041XG microwave bridge, an Oxford Instrument liquid-helium quartz cryostat, and a dual mode cavity (ER4116DM). Fourier-transform infrared (FTIR) spectra were collected on a Varian 800 Scimitar series FTIR spectrometer in Nugol. 1H and 13C nuclear magnetic resonance (NMR) spectroscopies were conducted using a Bruker DRX500 spectrometer. Solution magnetic moments were determined by the Evan’s method using a Bruker DRX500 spectrometer.25 Cyclic voltammetric experiments were conducted using a CHI600C electrochemical analyzer. A 2.0 mm glassy carbon electrode was used as the working electrode at scan velocities of 100 mV s−1. A cobaltocenium/cobaltocene couple (CoCp2+/CoCp2) (ΔEp = 0.136 V) was used to monitor the Ag wire reference electrode and all potentials are reference to the Fc+/Fc couple.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!