The largest database of trusted experimental protocols

Anti ha agarose beads a2095

Manufactured by Merck Group

Anti-HA agarose beads (A2095) are a laboratory product designed for the purification and detection of proteins tagged with the hemagglutinin (HA) epitope. These beads are made of agarose and have the anti-HA antibody covalently attached to their surface, allowing for efficient capture and isolation of HA-tagged proteins from complex samples.

Automatically generated - may contain errors

11 protocols using anti ha agarose beads a2095

1

Immunoblot Analysis of Ubiquitin-Proteasome Pathway

Check if the same lab product or an alternative is used in the 5 most similar protocols
Anti-Set8 (C18B7; 1:1,000 immunoblot (IB)), anti-β-catenin (D10A8; 1:1,000 IB), anti-Skp2 (D3G5; 1:1,000 IB), anti-Mcl-1 (D35A5; 1:1,000 IB), anti-G9A (C6H3; 1:1,000 IB), anti-Cullin 1 (4995; 1:1,000 IB) and anti-β-TRCP1 (4394; 1:1,000 IB) antibodies were purchased from Cell Signaling Technology. Anti-p27 (SC-528; 1:500 IB), anti-Cullin 1 (SC-17775; 1:1,000 IB), anti-casein kinase 1δ (H-60; 1:1,000 IB), anti-casein kinase 1α (SC-6474; 1:1,000 IB), anti-c-Myc (9E10; 1:1,000 IB, 2 μg immunoprecipitates (IP)) and polyclonal anti-HA antibodies (SC-805; 1:1,000 IB, 2 μg IP) were purchased from Santa Cruz Biotechnology. Anti-Vinculin antibody (V-4505; 1:2,000 IB), monoclonal anti-Flag antibody (F-3165), polyclonal anti-Flag antibody (F-2425; 1:1,000 IB, 2 μg IP), anti-HA agarose beads (A-2095; 1:1,000 IB, 2 μg IP), peroxidase-conjugated anti-mouse secondary antibody (A-4416; 1:3,000 IB) and peroxidase-conjugated anti-rabbit secondary antibody (A-4914; 1:3,000 IB) were purchased from Sigma. Monoclonal anti-HA antibody (MMS-101P) was purchased from Covance. Anti-GFP antibody (632380; 1:1,000 IB), anti-Cdh1 (34-2000; 1:1,000 IB) antibody, Oligofectamine, Lipofectamine and Plus reagents were purchased from Invitrogen. Anti-CUL 4B (16184-1-AP; 1:1,000 IB) antibody was purchased from Proteintech Group.
+ Open protocol
+ Expand
2

Comprehensive Antibody Validation Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
All antibodies were used at a 1:1000 dilution in 5% non-fat milk for western blot. Anti-ERG antibody [EPR3864 (2)] and (C-20) were purchased from Abcam and Santa Cruz, respectively. Anti-SPOP antibody (16750-1-AP), Anti-BRD2 (22236-1-AP) and anti-BRD3 (11859-1-AP) antibody were purchased from Proteintech. Anti-BRD4 antibody was purchased from Cell Signaling (13440) and Bethyl laboratories (A301-985A-M). Anti-Cullin 3 (2759), anti-GST (2625), anti-DEK (13962s), anti-SRC3 (2126), anti-Cleaved Caspase-3 (9664), anti-Cleaved PARP (5625), polyclonal anti-Myc-Tag antibody (2278) and monoclonal anti-Myc-Tag (2276) antibodies were purchased from Cell Signaling. Polyclonal anti-Flag antibody (F-2425), monoclonal anti-Flag antibody (F-3165, clone M2), anti-Tubulin antibody (T-5168), anti-Vinculin antibody (V-4505), anti-Flag agarose beads (A-2220), anti-HA agarose beads (A-2095), peroxidase-conjugated anti-mouse secondary antibody (A-4416) and peroxidase-conjugated anti-rabbit secondary antibody (A-4914) were purchased from Sigma. Monoclonal anti-HA antibody (MMS-101P) was purchased from Biolegend. Anti-GFP (8371-2) antibody was purchased from Clontech. Anti-Cullin 1 (SC-17775), anti-AR (N-20), anti-TRIM24/TIF1α (C-4), polyclonal anti-HA (SC-805) and anti-p27 (SC-528) were purchased from Santa Cruz. Anti-Xpress (46-0528) antibody was purchased from Invitrogen.
+ Open protocol
+ Expand
3

Immunoblotting and Immunoprecipitation Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cells were washed with cold phosphate-buffered saline (PBS) and lysed in EBC buffer (50 mM Tris pH 7.5, 120 mM NaCl and 0.5% NP-40) supplemented with protease inhibitors (K1019, APExBIO, Houston, TX, USA) and phosphatase inhibitors (K1015, APExBIO, Houston, USA). The cell lysates were clarified by centrifugation at 13,200 r.p.m. at 4 °C for 10 min. The protein concentrations of lysates were measured using Nanodrop with Bio-Rad protein assay reagent. Equal amounts of whole-cell lysates were resolved by SDS-PAGE and immunoblotted with indicated antibodies. For immunoprecipitation, 2000–5000 μg lysates were incubated with agarose-conjugated primary antibodies for 3–4 h at 4 °C or with the indicated primary antibody (3 to 5 μg) overnight followed by 1 h incubation with Protein A Sepharose beads. Immunoprecipitants were washed three times with NETN buffer (20 mM Tris, pH 8.0, 150 mM NaCl, 1 mM EDTA, and 0.5% NP-40) and then resolved by SDS-PAGE. Anti-HA agarose beads (A2095) and anti-Flag agarose beads (A2220) were purchased from Sigma Aldrich. Anti-Myc agarose beads (658502) were purchased from BioLegend. Anti-PRMT5 antibody conjugated to agarose (sc-376937) was purchased from Santa Cruz Biotechnology (Dallas, TX, USA).
+ Open protocol
+ Expand
4

Comprehensive Antibody Validation Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
All antibodies were used at a 1:1000 dilution in 5% non-fat milk for western blot. Anti-ERG antibody [EPR3864 (2)] and (C-20) were purchased from Abcam and Santa Cruz, respectively. Anti-SPOP antibody (16750-1-AP), Anti-BRD2 (22236-1-AP) and anti-BRD3 (11859-1-AP) antibody were purchased from Proteintech. Anti-BRD4 antibody was purchased from Cell Signaling (13440) and Bethyl laboratories (A301-985A-M). Anti-Cullin 3 (2759), anti-GST (2625), anti-DEK (13962s), anti-SRC3 (2126), anti-Cleaved Caspase-3 (9664), anti-Cleaved PARP (5625), polyclonal anti-Myc-Tag antibody (2278) and monoclonal anti-Myc-Tag (2276) antibodies were purchased from Cell Signaling. Polyclonal anti-Flag antibody (F-2425), monoclonal anti-Flag antibody (F-3165, clone M2), anti-Tubulin antibody (T-5168), anti-Vinculin antibody (V-4505), anti-Flag agarose beads (A-2220), anti-HA agarose beads (A-2095), peroxidase-conjugated anti-mouse secondary antibody (A-4416) and peroxidase-conjugated anti-rabbit secondary antibody (A-4914) were purchased from Sigma. Monoclonal anti-HA antibody (MMS-101P) was purchased from Biolegend. Anti-GFP (8371-2) antibody was purchased from Clontech. Anti-Cullin 1 (SC-17775), anti-AR (N-20), anti-TRIM24/TIF1α (C-4), polyclonal anti-HA (SC-805) and anti-p27 (SC-528) were purchased from Santa Cruz. Anti-Xpress (46-0528) antibody was purchased from Invitrogen.
+ Open protocol
+ Expand
5

Protein Extraction and Immunoprecipitation

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cells were rinsed with ice-cold phosphate-buffered saline (PBS) and lysed in EBC buffer [50 mM tris (pH 7.5), 120 mM NaCl, and 0.5% NP-40] or Triton buffer [40 mM Hepes (pH 7.4), 150 mM NaCl, 2.5 mM MgCl2, 1 mM EDTA, and 1% Triton X-100] supplemented with protease inhibitor (Thermo Fisher Scientific, A32953) and phosphatase inhibitors (phosphatase inhibitor cocktail set I and II, Calbiochem). The cell lysates were centrifuged at 13,200 rpm at 4°C for 10 min. The protein concentration of lysates was determined using NanoDrop by Bio-Rad protein assay reagent. Equal amounts of whole-cell lysates were resolved by SDS–polyacrylamide gel electrophoresis (SDS-PAGE) and immunoblotted with indicated antibodies. For immunoprecipitation (IP), 2000 to 5000 μg of lysates were incubated with agarose-conjugated antibodies for 3 to 5 hours at 4°C. Immunoprecipitants were washed three times with NETN buffer [20 mM tris (pH 8.0), 150 mM NaCl, 1 mM EDTA, and 0.5% NP-40] or Triton buffer before being resolved by SDS-PAGE. Anti-HA agarose beads (A2095) were purchased from Sigma-Aldrich. Anti-Myc agarose beads (658502) were purchased from BioLegend. Anti-BRD4 agarose beads (sc-518021) were purchased from Santa Cruz Biotechnology.
+ Open protocol
+ Expand
6

Antibody Detection and Validation Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Anti-HDAC6 (7612), mouse monoclonal anti-Myc-Tag (2276), rabbit polyclonal anti-Myc-Tag antibody (2278), anti-Cullin 3 (2759), anti-LC3-B (2775), EMT antibody sampler kit (9782), anti-Ac-α-Tubulin (5335) and anti-GST (2625) antibodies were purchased from Cell Signaling. Anti-TRIM24 (TIF1α, SC-271266), anti-Cullin 1 (SC-11384), anti-HA antibody (SC-805), anti-Tubulin (SC-73242) and anti-p27 (SC-527) antibodies were purchased from Santa Cruz. Anti-SPOP antibody (16750-1-AP) was purchased from Proteintech. Anti-GFP (8371-2) antibody was purchased from Clontech. Polyclonal anti-Flag antibody (F7425), monoclonal anti-Flag antibody (F-3165, clone M2), anti-vinculin antibody (V-4505), peroxidase-conjugated anti-mouse secondary antibody (A-4416), peroxidase-conjugated anti-rabbit secondary antibody (A-4914), anti-HA agarose beads (A-2095) and anti-Flag agarose beads (A-2220) were purchased from Sigma. All antibodies were used in 1:1000 dilutions in 5% non-fat milk for western blot.
MLN4924 was a kind gift from Dr. William Kaelin (Dana-Farber cancer institute). Bafilomycin A1 was kindly provided by Dr. Junying Yuan (Harvard Medical School). MG132 (BML-PI102-0005) was purchased from Enzo life science.
+ Open protocol
+ Expand
7

Cell Lysis and Immunoprecipitation Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cells were rinsed with ice-cold phosphate-buffered saline (PBS) and lysed with EBC buffer (50 mM Tris pH 7.5, 120 mM NaCl, 0.5% NP-40) or Triton buffer (40 mM HEPES pH 7.4, 150 mM NaCl, 2.5 mM MgCl2, and 1% Triton) supplemented with protease inhibitor (Thermo Fisher, A32953) and phosphatase inhibitors (phosphatase inhibitor cocktail sets I and II, Calbiochem). The cell lysates were centrifuged at 13,200 r.p.m. for 10 min at 4 °C. The protein concentrations were measured using Nanodrop (Thermo Fisher) with Bio-Rad protein assay reagent. Equal amounts of whole cell lysates were resolved by SDS-polyacrylamide gel electrophoresis (SDS-PAGE) and immunoblotted with the indicated antibodies. For immunoprecipitation, the lysates (1000–3000 μg) were incubated with 50% slurry of agarose conjugated antibody for 3–5 h at 4 °C. The immunoprecipitates were washed four times with NETN buffer (20 mM Tris pH 8.0, 150 mM NaCl, 1 mM EDTA, and 0.5% NP-40) or Triton buffer before being resolved by SDS-PAGE. Anti-FLAG agarose beads (A2220) and anti-HA agarose beads (A2095) were purchased from Sigma. Anti-AKT1 antibody conjugated to agarose (sc-5298 AC) and anti-PRMT5 antibody conjugated to agarose (sc-376937 AC) were purchased from Santa Cruz Biotechnology.
+ Open protocol
+ Expand
8

Analyzing DNA Damage Response

Check if the same lab product or an alternative is used in the 5 most similar protocols
Anti-Flag M2 agarose beads (A2220) and anti-HA agarose beads (A2095) were purchased from Sigma. Anti-Chk1 (sc-56288) and anti-p53 (sc-55476) antibodies were purchased from Santa Cruz. Anti-PARP-1 (9532), anti-pChk1S345 (2341), anti-pChk1S317 (2344), anti-p-p53 (9284), anti-γ-H2AX (9718), anti-pATR-S428 (2853), anti-pATM-S1981 (13050) and anti-pCdc25C (9528S) antibodies were purchased from Cell Signaling Technologies. Cycloheximide (C4859), cisplatin (479306), and imidazole (12399) were purchased from Sigma. Ni-NTA resin (635659) was purchased from Clontech.
+ Open protocol
+ Expand
9

Antibody panel and inhibitors for Wnt signaling

Check if the same lab product or an alternative is used in the 5 most similar protocols
Mouse monoclonal anti-Myc-Tag (2276), rabbit monoclonal anti-Myc-Tag antibody (2278), anti-β-TRCP (4394), anti-Cyclin D1 (2978), anti-LRP6 (3395), rabbit polyclonal anti-Cullin 1 (4995) antibodies were purchased from Cell Signaling. Anti-HA antibody (SC-805), anti-Tubulin (SC-73242), anti-c-Myc (SC-40), anti-Axin-2 (SC-8570) and anti-p27 (SC-527) antibodies were purchased from Santa Cruz. Anti-ZNRF3 antibody (ab176449) was purchased from Abcam. Anti-GFP (8371-2) antibody was purchased from Clontech. Anti-β-catenin (AV100600), polyclonal anti-Flag antibody (F7425), monoclonal anti-Flag antibody (F-3165, clone M2), anti-Vinculin antibody (V-4505), peroxidase-conjugated anti-mouse secondary antibody (A-4416), peroxidase-conjugated anti-rabbit secondary antibody (A-4914), anti-HA agarose beads (A-2095) and anti-Flag agarose beads (A-2220) were purchased from Sigma. All antibodies were used in 1:1000 dilutions in 5% non-fat milk for Western blot. Proteasome inhibitor MG132 (S2619) and CKI inhibitor D4476 were obtained from Selleckchem. CHX (C4859) was purchased from Sigma; the neddylation inhibitor MLN4924 was a kind gift from Dr. William Kaelin (Dana-Farber cancer institute). λ-PPase (P0753S) was obtained from New England Biolabs.
+ Open protocol
+ Expand
10

Cell Lysis and Immunoprecipitation Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cells were rinsed with ice-cold phosphate-buffered saline (PBS) and lysed in EBC buffer (50 mM Tris–HCl pH 7.5, 120 mM NaCl and 0.5% NP-40) or Triton buffer (40 mM HEPES pH 7.4, 150 mM NaCl, 2.5 mM MgCl2, 1 mM EDTA and 1% Triton X-100) supplemented with protease inhibitor (Thermo Fisher, A32953) and phosphatase inhibitors (phosphatase inhibitor cocktail Set I and II, Calbiochem). The cell lysates were centrifuged at 13,200 r.p.m. at 4 °C for 10 min. The protein concentration of lysates was determined using Nanodrop by Bio-Rad protein assay reagent. Equal amounts of whole cell lysates were resolved by SDS-PAGE and immunoblotted with indicated antibodies. For IP, 2000–5000 μg lysates were incubated with agarose conjugated antibodies for 3–5 h at 4 °C. Immunoprecipitants were washed three times with NETN buffer (20 mM Tris–HCl, pH 8.0, 150 mM NaCl, 1 mM EDTA and 0.5% NP-40) or Triton buffer before being resolved by SDS-PAGE. Anti-HA agarose beads (A2095) and anti-FLAG agarose beads (A2220) were purchased from Sigma-Aldrich. Anti-Myc agarose beads (658502) were purchased from BioLegend. Some blots were cut prior to hybridization with primary antibodies, but one full-length original, unprocessed blot for each antibody was provided in the Supplementary Materials.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!