Styrene (>99%) contains 4-tert-butylcatechol as stabilizer, divinylbenzene (DVB, technical grade 80%) contains monomethyl ether hydroquinone as inhibitor, sodium 4-vinylbenzenesulfonate (NaVBS, >90%), ammonium peroxydisulfate (APS, >98%), aluminum oxide (Al2O3, ≥98%) were purchased from Sigma-Aldrich (Merck KGaA, Darmstadt, Germany). Styrene and DVB were passed through aluminum oxide to remove the stabilizer before use. Ethanol and methanol were purchased from Chemical Company (Iasi, Romania) and were used as received. Distilled water was used in all experiments and was obtained from a Lauda Puridest PD 2 R GFL Technology (Lauda-Königshofen, Germany) water-distilled system.
Ammonium peroxydisulfate
Manufactured by Merck Group
Sourced in United States, Germany
Ammonium peroxydisulfate is a chemical compound with the formula (NH4)2S2O8. It is a white crystalline solid that is commonly used as an oxidizing agent, initiator, and catalyst in various industrial and laboratory applications.
Automatically generated - may contain errors
Lab products found in correlation
Aniline, by Merck Group (4 mentions)
Polyvinyl alcohol (pva), by Merck Group (3 mentions)
Pyrrole, by Merck Group (3 mentions)
Hydrochloric acid (hcl), by Merck Group (3 mentions)
Acrylamide, by Merck Group (2 mentions)
Acetone, by Merck Group (2 mentions)
Sodium hydroxide (naoh), by Merck Group (2 mentions)
Naphthalene, by Merck Group (2 mentions)
Phosphoric acid, by Merck Group (2 mentions)
Reagent grade aniline hydrochloride, by Merck Group (2 mentions)
N hydroxysuccinimid, by Merck Group (2 mentions)
N 3 dimethylaminopropyl n ethylcarbodiimide hydrochloride, by Merck Group (2 mentions)
Methanol, by Merck Group (2 mentions)
Sodium 4 vinylbenzenesulfonate, by Merck Group (1 mentions)
Pioglitazone hydrochloride, by Merck Group (1 mentions)
Ethyl ether, by Merck Group (1 mentions)
Aminoguanidine, by Merck Group (1 mentions)
Tween 20, by Merck Group (1 mentions)
Tris base, by Merck Group (1 mentions)
Sodium dodecyl sulfate (sds), by Merck Group (1 mentions)
15 protocols using ammonium peroxydisulfate
1
Synthesis of Styrene-based Polymers
2
Extraction and Purification of VES
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
VES was extracted and purified from unripe pink wax apple fruit (Syzygium samarangense (Blume) Merrill and Perry) following the reported procedure [40 (link)]. 1,4-Dithiothreit, acrylamide, aminoguanidine (AG), ammonium peroxydisulfate, D-glucose, ethyl alcohol, ethyl ether, glycine, methanol, MG, pioglitazone hydrochloride (PIO), sodium chloride, sodium dodecyl sulfate (SDS), sodium phosphate dibasic, sulfuric acid, thiourea, tris base, Triton X-100, Tween-20, and urea were purchased from Sigma (St. Louis, MO, USA).
3
Electrochemical Detection of Antioxidants
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
GO was purchased from Xfnano Materials Tech (Nanjing, China). H2O2 was obtained from Damao Chemical Reagent (Tianjin, China). Aniline, potassium hexachloroplatinate (KPtCl6), ammonium peroxydisulfate, ascorbic acid, uric acid, and acetaminophen were purchased from Sigma-Aldrich (St. Louis, MO, USA). Phosphate buffer (PB, 0.1 M, pH 7.0) was prepared using Na2HPO4 and NaH2PO4. Doubly distilled water was used to prepare all aqueous solutions. All experiments were performed at room temperature.
4
Fabrication of Graphene-Reinforced Bioactive Scaffold
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
PCL pellets (Mn = 80,000 g mol−1), gelatin (porcine skin type A powder), polyvinylidene fluoride (PVDF; Mn = 270,000 g mol−1), aniline monomer, chitosan (Cs; deacetylation 75–85%), ammonium peroxydisulfate (APS), graphene, sodium dodecyl sulfate (SDS), fetal bovine serum (FBS), phosphate buffered saline (PBS), penicillin–streptomycin, and trypsin–EDTA, dey-engley neutralizing broth (DE), 4′,6-Diamidino-2-phenylindole dihydrochloride (DAPI), all were obtained from Sigma-Aldrich. The N, N-dimethylformamide (DMF), hydrochloric acid (HCl), glacial acetic acid, trypton soy agar (TSA), paraformaldehyde, Bovine serum albumin (BSA), ethanol, methanol, and acetone were purchased from Merck (Germany). Glutaraldehyde solution (GTA; 50%) was supplied by Beijing Chemical Reagents. Dulbecco′s modified DMEM/F12 was obtained from Gibco Invitrogen. SYBER Green Master Mix (Pluse 2x, High ROX™, Denmark), ZnO with a purity of over 99.5% was purchased from Bonyan Shimi Company, Tehran, Iran. Antibodies (MAP2, Nestin) and PC12 cells were obtained from Pasteur Institute, Tehran, Iran.
5
Facile Synthesis of Titanium-based Nanocomposites
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Titanium(iv ) isopropoxide (TTIP, 97%) acrylamide (AM, ≥99%), bis-acrylamide (BAM, 99%), ammonium peroxydisulfate (AP, ≥98.0%), 1,2-bis(dimethylamino)ethane (TEMED, 99%), poly(vinyl alcohol) (PVA, 98–99%), polyethylene glycol tert-octylphenylether (triton X-405, 70%), terephthalic acid (TA, 98%), sodium hydroxide (NaOH, 97%) and methylene blue (MB, ≥82%) were purchased from Sigma-Aldrich. Potassium chloride (KCl, 100%) and hydrogen peroxide (H2O2) were obtained from Fischer. Glacial acetic acid (AA, 100%) was purchased from Labscan. Ethanol (analytical grade), n-hexane (95%), acetone (99.50%), 2-propanol (≥99.5%) and LB (Luria–Bertani) nutrient broth were procured from Merck. The cooking oil (sunflower) was of the commercial grade purchased from a local market in Lahore. The Escherichia coli [ACCN, KJ880039] and Staphylococcus aureus [ACCN, KY635411] strains, and deionized water purified by Milli-Q Plus system (Millipore, Bedford, MA, USA) was used for the whole research study.
6
Polycyclic Aromatic Hydrocarbon Analysis
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
In this study, benzo[a]pyrene (99.2%), phenanthrene (99.8%), naphthalene (99.9%), fluoranthene (99.3%), benzo[a]anthracene (99.2%), calcium chloride (CaCl2) (98%), diammonium hydrogen phosphate ((NH4)2HPO4) (99%), potassium dihydrogen phosphate (KH2PO4) (98%), ammonium peroxydisulfate ((NH4)2S2O8) (99%), acetic acid (99.8%), hydrochloric acid (98%), sodium hydroxide (98%), and aniline (99%) were obtained from Sigma-Aldrich and used without any purification. Also, high purity nitrogen (99.99%) was obtained from Raham Company (Tehran, Iran).
7
Synthesis of Pyrrole-Functionalized PAN Nanocomposites
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
PAN (MW 50 000–70 000 Da, 99%) was purchased from Sarchem Laboratories Inc., New Jersey. Pyrrole (98%), ammonium peroxydisulfate (APS), 4-dodecylbenzene sulfonic acid (DBSA) 99%, HCl 12 M, Rhodamine B (RB), Methyl Orange (MO), and naphthalene were purchased from Sigma Aldrich, 5,5-dimethyl-1-pyrroline-N-oxide (DMPO) from Enzo Life Sciences Inc., New York. Dimethylformamide (DMF) was supplied by Fisher Scientific, H3PO4 (85%) by Carlo Erba, CH3CN (Chromasolv for HPLC, purity ≥ 99.9%) by Honeywell. All the chemicals were used without further purification. Water was purified with a Milli-Q plus apparatus (TOC = 2 ppb, conductivity 18.2 MΩ cm). The commercial multiwalled carbon nanotubes employed were Nanocyl™ NC7000 industrial grade, purchased from Nanocyl S.A., Belgium. Their reported features were: 18 outer mean diameter 9.5 nm, average length 1.5 μm, specific surface area 475 m2 g−1, amorphous carbon pyrolytically deposited on the outer layer, C purity 90%, and metal oxides content 10% (1% transition metals). Reported impurities, determined by inductively coupled plasma mass spectrometry (ICP-MS), were: Al (5.9 wt%), Fe (0.5 wt%), and Co (0.2 wt%). This material was used without any further purification and is referred to in this article as CNT(NP), where NP stands for NanoParticles or Non-Purified.
8
Distillation of Aniline with Zinc Dust
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Aniline (ADWIC, Egypt) was distilled using zinc dust.34 (link) The other chemicals, such as glacial acetic acid, boric acid and sodium hydroxide, were bought from ADWIC, Egypt, and were used as received. Ammonium peroxydisulfate (APS), phosphoric acid, MB and AG from Sigma-Aldrich were used without further purification. All chemicals were of analytical grade. Solutions were prepared using freshly distilled water.
9
Synthesis of rGO-PANI Hybrid Catalysts
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Graphite powder (Alfa Aesar), aniline (Alfa Aesar), sulphuric acid (SRL), phosphoric acid (Alfa Aesar), hydrochloric acid (SRL), ammonium peroxydisulfate (Alfa Aesar), potassium permanganate (Sigma-Aldrich), potassium tetrachloropalladate (Alfa Aesar), tetrachloro auric acid (Alfa Aesar), polyvinyl pyrrolidone (Alfa Aesar), sodium borohydride (Alfa Aesar), hydrazine (Sigma-Aldrich), hydrogen peroxide (SRL), ethanol (SRL), hexane (Alfa Aesar), double distilled water were used as a starting precursors for the preparation of bare rGO, PANI, and rGO-PANI supported mono (Pd) & bimetallic (Pd: Au) nanocomposite hybrid catalysts.
10
Synthesis of Polystyrene Latex Particles
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
The synthetic aqueous dispersion solutions of PS latex particles with the diameter of 192 nm, 214 nm, 230 nm, 245 nm, and 265 nm are used, whose solid content are 24.23 wt%, 24.10 wt%, 19.89 wt%, 22.54 wt%, and 22.70 wt%, respectively. Methyl methacrylate (MMA), acrylic acid (AA), styrene (St), ammonium bicarbonate, ammonium peroxydisulfate (APS), sodium dodecyl benzene sulfonate (SDBS), AM, PEGDA (Mn 700), sodium dodecyl sulfate (SDS), polyvinylpyrrolidone (PVP, Mn 40000), isopropyl alcohol (IPA), and n-butyl acetate (n-BuAc) are purchased from Sigma-Aldrich. TPO is purchased from Adamas. CB (granularity <90 nm) is purchased from Innochem. All chemical reagents are directly used as received without further purification.
About PubCompare
Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.
We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.
However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.
Ready to get started?
Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required
Revolutionizing how scientists
search and build protocols!