The largest database of trusted experimental protocols

Unicel dxi immunoassay system

Manufactured by Beckman Coulter
Sourced in United States

The UniCel DxI Immunoassay system is a fully automated instrument designed for high-throughput immunoassay testing. It is capable of performing a wide range of immunoassay tests, including hormone, therapeutic drug, and special chemistry analyses.

Automatically generated - may contain errors

9 protocols using unicel dxi immunoassay system

1

Standardized Blood Sampling Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
All blood sampling was performed at the General Clinical Research Center and analyzed at VUMC central laboratories. After blood draw was performed, samples were transported on ice and centrifuged at 3000 rpm for 15 min before being kept frozen at −80° Celsius. Plasma fasting glucose concentrations were analyzed using the glucose oxidase method (Glucose analyzer 2; Beckman Coulter, Brea, CA). Biochemistry measurements were analyzed at the VUMC Pathology Laboratory. High sensitivity C‐reactive protein (hs‐CRP) concentrations were measured by high‐sensitivity particle‐enhanced turbidimetric UniCel DxI Immunoassay system (Beckman Coulter).
+ Open protocol
+ Expand
2

HEART Score Troponin Measurement Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
The HEART score only considers admission troponin levels. Troponin levels were measured with the Access AccuTnI+3 Troponin I assay on the UniCel DxI Immunoassay System (Beckmann Coulter, Brea, CA). The cutoff for MI was set at >60 ng/L at the coefficient of variation <10%. The limit of detection was 10 ng/L, and the 99th percentile cut‐off point of 42 ng/L.22
+ Open protocol
+ Expand
3

Serum 25(OH)D Measurement Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
A total of 2 mL of collected blood was used to measure the levels of serum 25(OH)D which were analyzed using chemiluminescence Unicel DXI immunoassay system (Beckman-coulter, USA) with a detection limit 2.0 ng/mL and a total imprecision ≤ 10.0% CV at concentrations greater than 15.0 ng/mL (37.5 nmol/L) (21 (link)). Moreover, the total Standard Deviation (SD) was ≤ 1.5 ng/mL (3.8 nmol/L) at concentrations ≤ 15.0 ng/mL. Subjects were categorized according to serum 25(OH) D levels using the following cutoff values: Vitamin D deficient for serum 25(OH) D concentration<20 ng/ml, based on the levels at which bone-related symptoms become apparent, and insufficiency as a serum 25(OH) D of (20–30 ng/ml, determined by the level of vitamin D repletion sufficient for optimum bone (22 (link)).
+ Open protocol
+ Expand
4

Comprehensive Blood Biomarker Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
All blood sampling was performed at the General Clinical Research Center and analyzed at VUMC central laboratories. After blood drawn was performed, samples were transported on ice and centrifuged at 3000 rpm for 15 minutes before kept frozen at −80 °C. Plasma fasting glucose concentrations were analyzed by using the glucose oxidase method (Glucose analyzer 2; Beckman Coulter, Brea, CA). Concentrations of serum albumin, prealbumin, bicarbonate and intact parathyroid hormone (iPTH) were measured using standard methods at VUMC central laboratories. Serum leptin levels were performed at Diabetes Research Training Center (DRTC) hormone laboratory by using certified methods. High sensitivity C-reactive protein (hs-CRP) concentrations were measured by high-sensitivity particle-enhanced turbidimetric UniCel DxI Immunoassay system (Beckman Coulter). Plasma IL-6 levels were determined using cytometric bead arrays (Becton Dickinson, San Jose, CA). Plasma protein thiol groups were analyzed according to the procedure which previously published by Ellman 10 et al and as modified by Hu 11 (link) et al.
+ Open protocol
+ Expand
5

Comprehensive Biomarker Profiling Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
All blood samples were collected in similar fashion and technique to that described in Hung et al. 2010 (8 (link)). Glucose concentrations were measured by using the glucose oxidase method and insulin by double-antibody RIA, (Glucose Analyzer 2; Beckman Coulter, Brea, CA, and DA RIA; Millipore, St. Charles, MO, respectively). C-reactive protein levels were measured using the UniCel Dxi Immunoassay System (Beckman Coulter, Brea, CA). Adiponectin and leptin were measured using the MILLIPEX MAP Human Serum Adiponectin Panel A kit (Millipore, Billerica, MA). All of the other measurements were performed using standard, certified, routine laboratory methods.
+ Open protocol
+ Expand
6

Fasting Blood Analysis and Inflammation

Check if the same lab product or an alternative is used in the 5 most similar protocols
All blood sampling was performed at the GCRC and analysed at VUMC and VA central laboratories. After blood draw was performed, samples were transported on ice and centrifuged at 3000 rpm for 15 min before being kept frozen at −80°C. Plasma fasting glucose concentrations were analysed using the glucose oxidase method (Glucose Analyzer 2; Beckman Coulter, Brea, CA, USA). Biochemistry measurements were analysed at the VUMC Pathology Laboratory. High‐sensitivity C‐reactive protein (hs‐CRP) concentrations were measured by high‐sensitivity particle‐enhanced turbidimetric UniCel DxI Immunoassay system (Beckman Coulter).
+ Open protocol
+ Expand
7

Quantifying Myocardial Infarct Size via 3D Echocardiography

Check if the same lab product or an alternative is used in the 5 most similar protocols
Three-dimensional echocardiography was performed as described before [20 , 24 (link)]. In short, pigs were re-anesthetized according to the same protocol after 72 h. Medial sternotomy was performed and a gel-filled flexible sleeve was placed directly on the apex of the heart. An X3-1 transducer on an iE33 ultrasound device (Philips, Eindhoven, The Netherlands) was used to perform the echocardiogram. Images were analyzed offline using QLab 10.1 (3DQ advanced) analysis software. Due to incomplete capture of the LV, one animal was excluded from the analysis. After 3D-echocardiography, animals were killed by exsanguination under anesthesia. The heart was excised and the LV was cut into 5 equal slices from apex to base. Slices were incubated in 1 % TTC (Sigma-Aldrich Chemicals, Zwijndrecht, the Netherlands) in 37 °C 0.9 %NaCl for 10 min to discriminate between infarct tissue and viable myocardium. After incubation, photographs of the slices were made and the infarct size as a ratio of the left ventricle (LV) was quantified using ImageJ software (NIH, Bethesda, MD, USA). Troponin was measured in plasma isolated from blood drawn after 2 h reperfusion, using a UniCel DxI Immunoassay system (Beckman Coulter, Brea, CA, USA) with a paramagnetic particle, chemiluminescent immunoassay (Beckman Coulter, Brea, CA, USA).
+ Open protocol
+ Expand
8

Vitamin D Assessment in Participants

Check if the same lab product or an alternative is used in the 5 most similar protocols
At admission participants had three blood samples taken: one serum separating tube, one fluoride oxalate tube and one potassium EDTA tube. These samples were processed for 25-hydroxyvitamin D, random venous plasma glucose and haemoglobin A1c (HbA1c).
25-hydroxyvitamin D was processed by UniCel DxI Immunoassay System using Beckman Access 25(OH) Vitamin D UniCel DxI Reagent Pack. Serum vitamin D concentration reference ranges used in this study are the National Institute for Health and Care Excellence (NICE) recommended ranges as follows: Less than 25 nmol/L is vitamin D deficiency, 25–50 nmol/L is vitamin D insufficiency and greater than 50 nmol/L is vitamin D sufficiency.26
+ Open protocol
+ Expand
9

Blood Biomarker Analysis Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
All blood sampling was performed at the Clinical Research Center and analyzed at VUMC central laboratories. Leptin samples were analyzed at Vanderbilt's Hormonal Lab Core. High molecular-weight adiponectin and interleukin 6 (IL-6) were measured by enzyme-linked immunosorbent assay (R&D Systems, Minneapolis, MN). High-sensitivity C-reactive protein (hsCRP) was measured by high-sensitivity particle-enhanced turbidimetric UniCel DxI Immunoassay system (Beckman Coulter) at the Vanderbilt Clinical laboratory.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!